Find information on common issues.
Ask questions and find answers from other users.
Suggest a new site feature or improvement.
Check on status of your tickets.
Thermoelectric Device Compact Model
01 Sep 2015 | Compact Models |Contributor(s): Xufeng Wang, Kyle Conrad, Jesse Maassen, Mark Lundstrom
The NEEDS thermoelectric compact model describes a homogeneous segment of thermoelectric material and serves as a basic building block for complex electrothermal system.
TAG Solar Cell Model (p-i-n thin film)
23 Oct 2014 | Compact Models |Contributor(s): Sourabh Dongaonkar, Xingshu Sun, Mark Lundstrom, Muhammad A. Alam
The TAG solar cell model is a physics-based compact model for p-i-n thin film solar cells that can be used for panel level simulations.
Top 2 shown
nanoHUB-U: Thermoelectricity: From Atoms to Systems
nanoHUB-U: Fundamentals of Nanotransistors, 2nd Edition
ECE 606: Solid State Devices - Professors Muhammad A. Alam and Mark Lundstrom
ECE 656: Electronic Transport in Semiconductors
Top 4 shown
A Short Overview of the NEEDS Initiative
06 Jun 2016 | Online Presentations | Contributor(s): Mark Lundstrom
The talk is a brief overview of the program that discusses the rationale, status, and plans for NEEDS.
NEEDS: Goals, Status, and Plans
18 Mar 2016 | Presentation Materials | Contributor(s): Mark Lundstrom
This is the opening talk for 2016 MAPP workshop at U.C. Berkeley. It gives an overview of the NEEDS node in 2016.
A Primer on Semiconductor Fundamentals
10 Jan 2016 | Teaching Materials | Contributor(s): Mark Lundstrom
This primer quickly summarize some important semiconductor fundamentals. For those acquainted with semiconductors, this may be useful as a brief refresher. For those just getting started with semiconductors, my hope is that this primer provides just enough understanding to allow you to begin exploring semiconductor devices.
The NEEDS Initiative: Devices, Circuits, and Systems
07 Jan 2016 | Presentation Materials | Contributor(s): Mark Lundstrom
This presentation is part of the 8th IEEE/ACM Workshop on Variability Modeling and Characterization (VMC) 2015.
This presentation provides an overview of the NEEDS initiative, which is funded by the U.S. National Science Foundation and by the Semiconductor Research Corporation. The overarching goal is advance the science of nanodevices and enable new applications. The focus is on physics-based compact models for emerging devices. Such models link fundamental work on materials and devices to applications. NEEDS also has an infrastructure mission to develop tools and resources that facilitate the creation and dissemination of compact models. NEEDS has an educational mission too, which emphasizes the nanoscience behind the novel materials and devices being explored. This talk provides an overview of NEEDS and introduces a new set of open source Uncertainty Quantification tools that were developed by the material science community but which have applications in electronics.
Panel Discussion on Nanotechnology Research Beyound 2025
05 Jan 2016 | Online Presentations | Contributor(s): Mark Lundstrom, Roger T. Howe
Top 5 shown | See more results
NCN-NEEDS Summer Schools
Group Wiki Page:
The Network for Computational Nanotechnology and NEEDS seeks to bring a new perspective to engineering education to meet the challenges and opportunities of modern nanotechnology. Fifty years ago our field faced a similar challenge brought on by the advent of the transistor and it was...
Lessons from Nanoscience
Series Editors: Mark Lundstrom and Supriyo Datta
Purdue University, West Lafayette, Indiana U.S.A
Advisory Board: M. Ashraf Alam (Purdue), Marc Baldo (MIT),
and Gang Chen (MIT)
“Lessons from Nanoscience” aims to not only communicate recent developments in nanoscience,...
NCN Supported Tools
NCN Supported Tools
(Image(torch.png, 200 class=align-left) failed)
nanoHUB.org is operated by the Network for Computational Nanotechnology (NCN) funded by the National Science Foundation (NSF). While being open to contributions from the community we cannot provide the same level of support...
Data Preservation Practices
cientific research must be reproducible. If is it not reproducible, it is not science. When we publish a paper, we must include enough information so that others could, in principle, re-produce the results of your work. You also want to be sure that in...
NCN at Purdue Tools