Support

Support Options

Submit a Support Ticket

 

[Illinois] ECE 416 Optical Sensors I

By Brian Cunningham

Electrical and Computer Engineering, University of Illinois at Urbana-Champaign, Urbana, IL

Published on

Abstract

           In this lecture, we begin our discussion of Optical Biosensors. We start off by showing the general properties of optical biosensors besides the SPR. Then, we shift our attention to the improvements made to the SPR Sensor's performance, but also limitations. Before moving onto the structure of the optical biosensor, we had to get an overview of the Thin Film Interference and its role as creating a reflection along with a refractive index for the light traveling through. We focus on a type optical biosensor called the Reflection Interference Spectroscopy (RIFS). The equation to measure the phase is seen compared to the structure of the biosensor. The output provides a means for measuring the reflection as a wavelength. As the distance of the interference layer increases, we see the period of the curve of the output begin to shift to the right. We then view a model of a biosensor that uses the RIFS system and the equipment setup.

Bio

My research group is focused on the application of sub-wavelength optical phenomena and fabrication methods to the development of novel devices and instrumentation for the life sciences. The group is highly interdisciplinary, with expertise in the areas of microfabrication, nanotechnology, computer simulation, instrumentation, molecular biology, and cell biology. In particular, we are working on biosensors based upon photonic crystal concepts that can either be built from low-cost flexible plastic materials, or integrated with semiconductor-based active devices, such as light sources and photodetectors, for high performance integrated detection systems.

Using a combination of micrometer-scale and nanometer-scale fabrication tools, we are devising novel methods and materials for producing electro-optic devices with nanometer-scale features that can be scaled for low-cost manufacturing. Many of our techniques are geared for compatibility with flexible plastic materials, leading to applications such as low cost disposable sensors, wearable sensors, flexible electronics, and flexible displays. Because our structures manipulate light at a scale that is smaller than an optical wavelength, we rely on computer simulation tools such as Rigorous Coupled Wave Analysis (RCWA) and Finite Difference Time Doman (FDTD) to model, design, and understand optical phenomena within photonic crystals and related devices.

In addition to fabricating devices, our group is also focused on the design, prototyping, and testing of biosensor instrumentation for high sensitivity, portability, and resolution. Advanced instruments enable high resolution imaging of biochemical and cellular interactions with the ability to monitor images of biochemical interactions as a function of time. Using the sensors and instrumentation, we are exploring new applications for optical biosensor technology including protein microarrays, biosensor/mass spectrometry systems, and microfluidics-based assays using nanoliter quantities of reagents. The methods and systems developed in the laboratory are applied in the fields of life science research, drug discovery, diagnostic testing, and environmental monitoring. -From Professor Cunningham's Faculty Profile

Cite this work

Researchers should cite this work as follows:

  • Brian Cunningham (2013), "[Illinois] ECE 416 Optical Sensors I," http://nanohub.org/resources/17051.

    BibTex | EndNote

Time

Location

University of Illinois at Urbana-Champaign, Urbana, IL

Submitter

NanoBio Node, Obaid Sarvana, George Daley

University of Illinois at Urbana-Champaign

Tags

No classroom usage data was found. You may need to enable JavaScript to view this data.

nanoHUB.org, a resource for nanoscience and nanotechnology, is supported by the National Science Foundation and other funding agencies. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the National Science Foundation.