Category

Workshops

Published on

Abstract

The annual Peck Symposium honors the late Garnet E. Peck, Ph.D., Professor Emeritus of the department of Industrial and Physical Pharmacy at Purdue University. Dr. Peck left a record of enduring contributions to the pharmaceutical sciences, including the development of latex-based tablet coatings that have been used in the industry for more than thirty-five years. The goal of this event is to stimulate interest in the symposium's focus areas and to identify opportunities for new research.

Sponsored by

Department of Industrial and Physical Pharmacy, Dr. Garnet E. Peck Graduate Scholarship Fund, College of Pharmacy, Anderson Lecture Fund

Cite this work

Researchers should cite this work as follows:

  • (2018), "15th Annual Garnet E. Peck Symposium," http://nanohub.org/resources/28227.

    BibTex | EndNote

Time

Location

Holiday Inn, Lafayette, IN

In This Workshop

  1. Challenges and Advances in Downstream Purification of Biopharmaceuticals

    28 Mar 2018 | Online Presentations | Contributor(s): Ruben G. Carbonell

    The biopharmaceutical industry is facing demands for cost reductions in medications in developed countries with aging populations, as well as in developing countries with growing middle classes.  The advent of biosimilars has led to increased competition from other countries. ...

  2. Thermal Processing Enhances Drug Delivery of Poorly Water Soluble Drugs - Process Selection

    30 Mar 2018 | Online Presentations | Contributor(s): Robert O. Williams III

    This talk will discuss hot melt extrusion and KinetiSol® Dispersing in terms of process selection and limitations, and will include examples of formulations exhibiting enhanced properties.

  3. Low-Power Battery-Free Wireless Sensors for Industrial Process Monitoring

    31 Oct 2018 | Online Presentations | Contributor(s): Nithin Raghunathan

    This talk focuses on wireless process-monitoring sensors for dramatically improving lyophilization technology as employed in pharmaceutical and biotech product manufacturing. These multi-point sensing devices are wirelessly powered and require no batteries.

  4. Design and Modeling of Roll to Roll Continuous Lyophilization System

    31 Oct 2018 | Online Presentations | Contributor(s): Miko Cakmak

    In this talk we will  present a novel design of continuous roll to roll Lyophilization System  and metrology tool.

  5. Roll-to-Roll (R2R) Manufacturing of Smart Pharmaceuticals

    20 Apr 2018 | Online Presentations | Contributor(s): Ali Shakouri

    Birck Nanotechnology Center at Purdue is developing a foundry facility similar to that existing for silicon IC chips. We will describe development of IoT chemical sensors for wearables, food safety, and water and soil monitoring.

  6. Innovative Technologies for Spray Drying and Characterization of Pharmaceutical Solids

    20 Apr 2018 | Online Presentations | Contributor(s): Qi (Tony) Zhou

    This talk will summarize some advances in spray drying and characterization of pharmaceutical solids.

  7. Process Intensification via Continuous Crystallization System for Pharmaceutical Manufacturing

    10 Apr 2018 | Online Presentations | Contributor(s): Zoltan K. Nagy

    The talk intends to provide motivating examples of the next stage of innovation in pharmaceutical manufacturing, illustrating the potential benefits of the new quality-by-control (QbC) framework in improving product quality and process efficiency while reducing costs and time-to-market.