Support

Support Options

Submit a Support Ticket

 

Resonant Tunneling Diode Simulation with NEGF

Simulate 1D RTDs using NEGF.

Launch Tool

This tool version is unpublished and cannot be run. If you would like to have this version staged, you can put a request through HUB Support.

Archive Version 1.1.6
Published on 02 Jul 2009, unpublished on 13 Aug 2009
Latest version: 2.1.2. All versions

doi:10.4231/D38G8FH12 cite this

This tool is closed source.

Category

Tools

Published on

Abstract

Simulate transport in RTDs using the Non-equilibrium Green’s Function method. The simulation methodology is following the concepts of the NEMO 1-D simulation tool.


The embedded single band physics is decribed in detail in the Applied Physics Letters citation listed below.

Features: three different potential models: linear potential drop, semi-classical Thomas Fermi potential, and Hartree quantum charge-selfconsistent potential. relaxation in the reservoirs incorporated through a simple relaxation model. automatic determination of the AlGaAs barrier height.

  • barrier and multi-barrier devices.


    Upgrades from previous versions: Computational speed dramatically improved through computations in C rather than Matlab. Computation times for a single bias point are now down to about 1 second compared to several minutes. Matlab is notoriously bad in “for” loops, but the RGF (Recursive Green Function algorithm) cannot be vectorized in a matlab friendly fashion. So a lower-most C call was implemented that now performs the RGF for many energies in C. Current density plots as a function of energy are added to the outputs. They are also augmented by a normalized running integral, which helps to identify, “where” in energy the current contributions are. The adaptive grid is now set to be more selective and appears to resolve very narrow resonances much better. A possible non-convergence has been avoided by setting an upper bound for the energy nodes that can be added by the adaptive grid. Local Density of states and energy resolved charge profile plots have now been added. A possible discrepancy between the quantum and semi-classical charge at the boundaries has been corrected. This discrepancy occurred at very small decay lengths of the optical potential. Ver 1.1.1 has Local Density of states and energy resolved charge profile plots that conserve the integral value of the quantities in energy. Ver 1.1.2 has camera angles predefined for surface plots. Ver 1.1.2 enables the user to turn off the time consuming surface plots Ver 1.1.2 runs faster by avoiding frequent hard-disk access Ver 1.1.3 Boundary conditions at interfaces corrected for the effective mass hamiltonian. It is now based on the formulation of Frensley. Ver 1.1.3 New GUI options that allow the user to control the resonance finder and the adaptive grid generator Ver 1.1.3 The device geometry/construction is now more flexible. Ver 1.1.3 Resonances are now plotted based on the output of the resonance finder, if it is turned on. Ver 1.1.3 Resonances as a function of bias are also displayed if the resonance finder is turned on. Ver 1.1.4 The Energy Mesh Refinement algorithm has been improved, some bugs have been fixed. A typical simulation time has been reduced from 50 seconds to 30 seconds. Ver 1.1.5 The mesh refiner has been improved and use much less points to refine the energy grid. Ver 1.1.6 Convergence criteria have been improved.


    Theory – Transport with Non-Equilibrium Green Functions:

    Prof. Datta is providing information on the NEGF formalism and its applications in a designated Topics page with tutorials, research seminars, research publications, Ph.D. theses, and simulation tools. To understand the critical elements of the boundary conditions that treat the relaxation in the reservoirs we recommend that users read through the following publication. Quantum Device Simulation with a Generalized Tunneling Formula, Gerhard Klimeck, Roger K. Lake, R. Chris Bowen, William R. Frensley and Ted Moise, Appl. Phys. Lett., Vol. 67, p.2539 (1995).

    This RTD tool uses some of the concepts of the NEMO 1-D simulation tool. Unfortunately we cannot release NEMO 1-D as such on the nanoHUB and we are in the process of recreating some of its capabilities here. The first release of this nanoHUB tool has some severe limitations compared to NEMO 1-D. A more comprehensive understanding of the NEMO 1-D simulation capabilities can be gained from reading the following publications:

    Quantitative Resonant Tunneling Diode Simulation, R. Chris Bowen, Gerhard Klimeck, Roger Lake, William R. Frensley and Ted Moise, J. of Appl. Phys., Vol. 81, 3207 (1997). Single and multiband modeling of quantum electron transport through layered semiconductor devices, Roger Lake, Gerhard Klimeck, R. Chris Bowen and Dejan Jovanovic, J. of Appl. Phys., Vol. 81, 7845 (1997).


    Tool Limitations: single effective mass model, no sophisticated multiband models; no transverse momentum integration; no exchange and correlation potential; GaAs / AlGaAs material system; no material parameters are exposed to the users for possible changes


    Known issues with this release: resonances are identified only by peaks in the transmission. There is no true spatial resolution and resonances in the triangular emitter well might be identified as central device resonance.

  • Tags

    nanoHUB.org, a resource for nanoscience and nanotechnology, is supported by the National Science Foundation and other funding agencies. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the National Science Foundation.