Visualization of CNT FET Electrical Field Lines
- Nanoelectronic Modeling Lecture 40: Performance Limitations of Graphene Nanoribbon Tunneling FETS due to Line Edge Roughness
- Illinois MATSE 280 Introduction to Engineering Materials, Lecture 5 - Part 2 : Line Defects, Dislocations and their Scale
- Analysis of DC Electrical Conductivity Models of Carbon Nanotube-Polymer Composites with Potential Application to Nanometric Electronic Devices
Faculty Advisor(s): Ebert, Klimeck, Qiao
With transistors decreasing to nanometric dimensions, limits of current processing technologies are being reached. Many physical obstacles still need to be overcome to replace earlier silicon devices with Carbon NanoTube Field Effect Transistors (CNT FETs). Because of the minute size of the CNT FET channel, electron flow through the channel is no longer exclusively dependant on the gate voltage which produces a substantial leakage current. Scientific visualization techniques can prove to be highly successful in gaining a deeper understanding of the electrical behavior of the CNT FET. A two-step visualization method is used to observe the electrical field lines and equipotential surfaces around the device given a specific dataset. A Matlab code determines the electrical field vectors in the entire volume of the device and a trilinear interpolation allows obtaining their projection in any planar cross section. The electrical field in the selected plane is then rendered using the C++ OpenGL library and the ImageBased Flow Visualization technique. The resulting images enable researchers to analyze the influence of the transistor’s geometrical parameters on the electrical field, allowing potential development of the CNT FET.
Researchers should cite this work as follows:
Muriel Fort; Sameer Hamdan (2004), "Visualization of CNT FET Electrical Field Lines," https://nanohub.org/resources/745.
Fu Room, Potter Building, Room 234 <br /> Purdue University, West Lafayette, IN