Resources: All

Find a resource
  1. Microfabrication, Characterization and Sensor Development in the Industrial Space

    07 Nov 2018 | Online Presentations | Contributor(s): Nithin Raghunathan

    The Birck Nanotechnology center offers a variety of capabilities especially in general microfabrication, electrical and physical characterization. With regards to microfabrication, the center features a variety of toolsets to enable fabrication of most devices from scratch to finish. These...

  2. A Brief Look at the nanoHUB.org Content Contribution Process

    04 Mar 2019 | Online Presentations | Contributor(s): Joseph M. Cychosz

    This talk presents the types of resources that are available on nanoHUB that any user can contribute.  It will go over the process involved in making content available. Focus is on how Online Presentations  are produced and made available on nanoHUB.

  3. Electron-beam Lithography at Birck Nanotechnology Center

    09 Nov 2018 | Online Presentations

    In this talk, I will focus on doses for different EBL resists, stitching errors and alignment considerations. I will also highlight some common user mistakes and what can be done to prevent them.

  4. Surface Characterization at Nanoscale by means of AFM L1.1: Introduction and “Getting in Contact”

    11 Nov 2018 | Online Presentations | Contributor(s): Stanislav Leesment

    NT-MDT focuses on atomic force microscopes (AFM) and its combinations with ultrahigh resolution spectroscopy for nanotechnology and its applications. This is Part 1.

  5. Surface Characterization at Nanoscale by means of AFM L1.2: Resonance Oscillatory Modes

    11 Nov 2018 | Online Presentations | Contributor(s): Stanislav Leesment

    NT-MDT focuses on atomic force microscopes (AFM) and its combinations with ultrahigh resolution spectroscopy for nanotechnology and its applications. This is Part 2.

  6. Surface Characterization at Nanoscale by means of AFM L1.3: Non-Resonant Oscillatory HybriD Mode

    11 Nov 2018 | Online Presentations | Contributor(s): Stanislav Leesment

    NT-MDT focuses on atomic force microscopes (AFM) and its combinations with ultrahigh resolution spectroscopy for nanotechnology and its applications. This is Part 3.

  7. Birck Nanomaterials Characterization Workshop

    11 Nov 2018 | Workshops | Contributor(s): Neil R Dilley

    The aim of the workshop is to review the measurement techniques for both newcomers and existing users, see the instruments in action, and discuss cutting edge developments in both instrumentation and research.

  8. Quantum Design L2.1: Measurement Platforms (MPMS/PPMS) and New Options

    28 Nov 2018 | Online Presentations

  9. Quantum Design L2.2: NanoMOKE and Ferromagnetic Resonance (phaseFMR and CryoFMR)

    28 Nov 2018 | Online Presentations

  10. Moore’s Law Extension and Beyond

    19 Nov 2018 | Online Presentations | Contributor(s): Peide "Peter" Ye

    In his talk, Ye will review his research efforts at Purdue on materials, structures and device architecture to support the microelectronic industry and extend Moore’s Law. The goal of the research is that it will lead to smarter, ubiquitous computing technology and keep us healthier,...

  11. Introduction to nanoHUB

    26 Nov 2018 | Online Presentations | Contributor(s): Mohammad Mahfuzul Kabir

    This is a brief description of the steps required in accessing nanohub.org and more specifically the tools published in the web portal.

  12. Tutorial on Two Photon Lithography Tool

    26 Nov 2018 | Online Presentations | Contributor(s): Mohammad Mahfuzul Kabir, Varun Ajit Kelkar

    Two-photon lithography (TPL) is a nano-scale 3-d fabrication technique. TPL depends upon the two-photon polymerization process, whereby two incident photons of light are absorbed by a precursor material leading to polymerization. The smallest feature size (voxel) achievable in a TPL...

  13. Nanotechnology and Surface Science Applications

    27 Nov 2018 | Online Presentations | Contributor(s): Dmitry Zemlyanov

    Surface Characterization Facility at Birck Nanotechnology Center, BRK 1077

  14. Quantum Design L2.3: Nanolithography (Nanofrazor, Newmicra, and MicroWriter ML3)

    28 Nov 2018 | Online Presentations

    Nanolithography with Nanofrazor: thermal Scanning Probe Microscopy, Direct write laser lithography: ML3 series, and Software and Hardware add ons for EBL: NeoMicra

  15. Quantum Design L2.4: AFSEM (AFM in SEM), Single Photon Detectors, Quantum Optics Tools and Cryogenic Magneto Optical Platform

    28 Nov 2018 | Online Presentations

    Correlative Microscopy with the AFSEM: (AFM in SEM), Single Photon Detectors and Counting Electronics (SNSPD), Educational Tools for Quantum Optics (qutools), and Cyrogenic Magneto Optical Platform (OptiCool)

  16. Upcoming Electron Microscopy Capabilities at Purdue University: Structural, Chemical and Electronic Characterization at the Atomic Level of Complex Nano-materials

    28 Nov 2018 | Online Presentations | Contributor(s): Rosa Diaz

    The acquisition of new state of the art TEM – Themis Z – at Birck Nanotechnology Center will enable users across a wide range of research areas to acquire a higher understanding of nano‐materials at the atomic level. I will be presenting different applications for each of these new...

  17. DFT-LDA Helium

    06 Dec 2018 | Tools | Contributor(s): Dongsheng Wen, Alejandro Strachan

    Calculate ground state energy of Helium atom with DFT.

  18. ME 498: Manufacturing Data and Quality Systems

    06 Dec 2018 | Courses | Contributor(s): Chenhui Shao

    ME 498 is a new manufacturing course developed by Dr. Shao. The goal of this course is to provide students, including upper-level undergraduate and graduate students with state-of-the-art manufacturing analytics tools with a focus on quality control applications.

  19. Electronic Structure and Transport Properties of Graphene on Hexagonal Boron Nitride

    06 Dec 2018 | Presentation Materials | Contributor(s): Shukai Yao, Luis Regalado Bermejo, Alejandro Strachan

      Graphene is a zero-bandgap conductor with high carrier mobility. It is desired to search for an opening of band structure of graphene such that this kind of material can be applied in electronic devices. Depositing hexagonal Boron Nitride (h-BN) opens a bandgap in the band structure of...

  20. DFT Study of Anisotropic Elastic Property of LiCoO2 During Lithium Intercalation and Deintercalation Process

    06 Dec 2018 | Presentation Materials | Contributor(s): Lingbin Meng, Alejandro Strachan

    Lithium cobalt oxide (LiCoO2) is a popular cathode material of lithium-ion batteries due to its excellent electrochemical properties. In this study, the anisotropic elastic property of LiCoO2 has been studied by comparing the ratio of C11 and C33 between LiCoO2 and CoO2. As a result, the...