Support

Support Options

Submit a Support Ticket

 

demons

By M. E. Klausmeier-Brown1, C. M. Maziar1, Paul Dodd2, Mark Stettler3, Xufeng Wang1, Gerhard Klimeck1

1. Purdue University 2. Sandia National Laboratories 3. Intel Corporation

Improved program consists of DEMON and SDEMON

Launch Tool

You must login before you can run this tool.

Version 1.0.2 - published on 14 Nov 2014

doi:10.4231/D3959C844 cite this

This tool is closed source.

View All Supporting Documents

Category

Tools

Published on

Abstract

DEMONs simulates electron transport through one-dimensional DEvices by the MONte Carlo technique. The program produces histograms of the carrier distribution function at different positions as well as other quantities of interest such as the average electron velocity, carrier density, and total and kinetic energy. While DEMON was originally written for the ternary Al(x)Ga(1-x)As, this version has been expanded to treat Ga(x)In(1-x)As, Al(x)In(1-x)As, and even conventional Si devices as well. Additional capabilities include the ability to compute the impulse response of devices.

Powered by

Results for III-V materials are computed by DEMON 2.0, developed by Martin Klausmeier-Brown, Chris Maziar, and Paul Dodd. Results for Si are computed by SDEMON, developed by Mark Stettler.

Credits

Thanks to Steve Clark, and Mark Lundstrom for helping to design and debug the Rappture interface.

References

For a description of the theoretical basis and the implementation of DEMON, see M.E. Brown, "Monte Carlo Studies of Electron Transport in III-V heterostructures" MSEE Thesis, Purdue University, West Lafayette, IN, May, 1986 and the DEMON User's Manual. For a typical application, see C.M. Maziar, M.E. Klausmeier-Brown, and M.S. Lundstrom, "Proposed Structure for Transit Time Reduction in AlGaAs/GaAs Bipolar Transistors" IEEE Electron Dev. Lett., Vol. EDL-8, pp. 483-486, 1986. Demon is written in Fortran 77. Program authors are M.E. Klausmeier-Brown, C.M. Mazair, and P.E. Dodd, Purdue University. Last updated September 8, 1992.

For a description of the theoretical basis of SDemon and its implementation, consult, M.A. Stettler, "Monte Carlo Studies of Electron Transport in Silicon Bipolar Transistors," MSEE Thesis, Purdue University, West Lafayette, IN, Dec. 1990 and the SDemon User's Manual. The program is written in Fortran 77. Program author, M.A. Stettler, Purdue University. Last updated 8/5/89.

Cite this work

Researchers should cite this work as follows:

  • M. E. Klausmeier-Brown; ; Paul Dodd; Mark Stettler; Xufeng Wang; Gerhard Klimeck (2006), "demons," http://nanohub.org/resources/demons. (DOI: 10.4231/D3959C844).

    BibTex | EndNote

Tags

nanoHUB.org, a resource for nanoscience and nanotechnology, is supported by the National Science Foundation and other funding agencies. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the National Science Foundation.