You must login before you can run this tool.
Multimeter
Understand the correct procedure for measuring voltage (V) and current (I), and observe the dependence between the interchange of the leads and the sign of the numerical reading.
Recommendations
- Circuit Theory iApps
- Ohms Law
- Process Variation: An Evalution of Carbon Nanotube Transistor Field Effect Transistors
- Capacitance, Dielectrics, Current and Circuits Formula Sheet
- MOSFET Design Calculations - Step 1 (Instructor Copy)
- MOSFET Design Calculations - Step 2
- MOSFET Design Calculations - Step 2 (Instructor Copy)
- 2010 NCN Annual Review S10: Internal Education - UTEP
- MOSCap: First-Time User Guide
Category
Published on
Abstract
The objective of the Multimeter tool is to understand the correct procedure for measuring voltage (V) and current (I), and to observe the dependence between the interchange of the leads and the sign of the numerical reading. The tool allows the user to practice connecting the voltmeter in different locations to measure either the voltage or current in a circuit. If the measurement connection is incorrect, a warning message is displayed. Examine how reversing the leads at each connection affects the sign of the numerical reading.
Powered by
UTEP NCN Research Team
Sponsored by
This project is supported by NSF NCN Grant EEC-0634750.
Cite this work
Researchers should cite this work as follows: