Support

Support Options

Submit a Support Ticket

 

SUGARCube - Cantilever

Cantilever modeling and simulation with different loads

Launch Tool

You must login before you can run this tool.

Version 1.0.1 - published on 31 Mar 2010

doi:10.4231/D3RV0D08D cite this

This tool is closed source.

View All Supporting Documents

See also

No results found.

Category

Tools

Published on

Abstract

The simulator is currently designed to simulate cantilever beams. A cantilever beam is a beam that is anchored at one end while the tip of the beam is allowed to hang freely. The tool is designed to simulate how the cantilever beam will act under various forces and moments. There are two different simulations can be done by the tool: static analysis and (up to two parameters) sweep analysis. In the static analysis, up to four sets of three dimensional (3-D) loads (forces and moments) can be applied on the cantilever at user defined positions.

The final output of the tool is graphic representation of the beam that shows deflection of the beam in user defined view angle as well as the numerical value of the deflection at interested point in table format.

The netlist file which is used in SUGAR simulation is available to be downloaded in the end for user’s future development.

Credits

This tool is based on the work of Fengyuan Li, and Brandon Patterson.

Cite this work

Researchers should cite this work as follows:

  • Jason Clark; Fengyuan Li; Brandon Patterson; Manaz Rusi Taleyarkhan (2010), "SUGARCube - Cantilever," http://nanohub.org/resources/sugar. (DOI: 10.4231/D3RV0D08D).

    BibTex | EndNote

Tags

No classroom usage data was found. You may need to enable JavaScript to view this data.