nanoHUB.org will be intermittently unavailable Saturday, January 3, for scheduled maintenance. All tool sessions will be expired. We apologize for any inconvenience that may occur. close

Support

Support Options

Submit a Support Ticket

 

On-Chip Thermoelectric Cooling Tool

By Shuaib Salamat1, David Alberto Saenz2

1. Purdue University 2. University of Texas at El Paso

Simulates an embedded spot peltier cooler on a chip 1D thermal profile.

Launch Tool

You must login before you can run this tool.

Version 1.1 - published on 16 Sep 2014

doi:10.4231/D3610VS8V cite this

This tool is closed source.

View All Supporting Documents

    TEC TEC2 TEC3

Category

Tools

Published on

Abstract

This tool is provided to understand the basic principles of thermoelectric theory by performing a 1D simulation of the thermal profile of a common peltier cooling system layout. Refer to the TEC tool user's manual to see specific assumptions and limitations of this tool.

Powered by

nanoHUB Project

Credits

David Saenz, Shuaib Salamat, Mark Lundstrom

Sponsored by

The Network for Computational Nanotechnology
 

Cite this work

Researchers should cite this work as follows:

  • Shuaib Salamat; David Alberto Saenz (2011), "On-Chip Thermoelectric Cooling Tool," http://nanohub.org/resources/tec. (DOI: 10.4231/D3610VS8V).

    BibTex | EndNote

Tags

nanoHUB.org, a resource for nanoscience and nanotechnology, is supported by the National Science Foundation and other funding agencies. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the National Science Foundation.