Simulations Tools that connect to the Rice cluster will be inoperable due to system upgrades from Tuesday, May 29th, 2018, 8:00am ET to Wednesday May 30, 2018, 5:00pm ET. We apologize for any inconvenience.
Find information on common issues.
Ask questions and find answers from other users.
Suggest a new site feature or improvement.
Check on status of your tickets.
100 amps of electricity crackle in a vacuum chamber, creating a
spark that transforms carbon vapor into tiny structures. Depending
on the conditions, these structures can be shaped like little,
60-atom soccer balls, or like rolled-up tubes of atoms, arranged
in a chicken-wire pattern, with rounded ends. These tiny, carbon
nanotubes, discovered by Sumio Iijima at NEC labs in 1991, have
amazing properties. They are 100 times stronger than steel, but
weigh only one-sixth as much. They are incredibly resilient
under physical stress; even when kinked to a 120-degree angle,
they will bounce back to their original form, undamaged. And
they can carry electrical current at levels that would vaporize
ordinary copper wires.
Learn more about carbon nanotubes from the many resources on this site, listed below. More information on Carbon nanotubes can be found here.
Thermal Microsystems for On-Chip Thermal Engineering
out of 5 stars
04 Apr 2006 | | Contributor(s):: Suresh V. Garimella
Electro-thermal co-design at the micro- and nano-scales is critical for achieving desired performance and reliability in microelectronic circuits. Emerging thermal microsystems technologies for this application area are discussed, with specific examples including a novel micromechanical...
Tribological Properties of Carbon Nanotube Bundles
03 Apr 2006 | | Contributor(s):: SeongJun Heo, Susan Sinnott
The tribological properties of carbon nanotube(CNT) bundles are investigated in this research using classical molecular dynamics(MD) simulations. Bundle of hollow single walled CNT or CNT filled with C60 is placed between two hydrogen-terminated amorphous diamond-like carbon(DLC) substrates. The...
The Effect of Temperature Control on the Mechanical Behavior of Carbon Nanotubes
29 Mar 2006 | | Contributor(s):: SeongJun Heo, Susan Sinnott
The effect of thermostat configurations on the mechanical behavior of empty and butane (n-C4H10) filled (10,10) carbon nanotubes (CNTs) is examined using classical, atomistic, molecular dynamics (MD) simulations. In particular, the influence of different types of thermostats, relative numbers of...
Irradiation and Nanomechanics of Multi-Walled Carbon Nanotubes
23 Mar 2006 | | Contributor(s):: Sharon Pregler, Susan Sinnott
Irradiation of nanotube structures with electron and ion beams has been used to produce functionalized nanotubes and fundamentally new structures, including junctions. Here, we build on previous studies to investigate the low-energy electron and ion (Ar and CF3) beam irradiation of triple walled...
Engineering the Fiber-Matrix Interface in Carbon Nanotube Composites
23 Mar 2006 | | Contributor(s):: Sharon Pregler, Yanhong Hu, Susan Sinnott
Particle depositions on polymer and carbon substrates to induce surface chemical modification are a growing research topic in particle-surface interactions due to localized deposition energy and the high density of molecules impacting the surface. Previous simulations have shown that particle...
Bending Properties of Carbon Nanotubes
21 Mar 2006 | | Contributor(s):: SeongJun Heo, Susan Sinnott
The effect of filling carbon nanotubes on the mechanical, especially bending, behavior of empty and filled (10,10) carbon nanotubes (CNTs) is examined using classical, atomistic, molecular dynamics (MD) simulations. In particular, influences of different filling materials like C60 or other CNT...
Electron and Ion Microscopies as Characterization Tools for Nanoscience and Nanotechnology
27 Feb 2006 | | Contributor(s):: Eric Stach
This tutorial presents a broad overview of the basic physical principles of techniques used in scanning electron microscopy (SEM), as well as their application to understanding processing/structure/property relationships in nanostructured materials. Special emphasis is placed on the capabilities...
A Gentle Introduction to Nanotechnology and Nanoscience
13 Feb 2006 | | Contributor(s):: Mark Ratner
While the Greek root nano just means dwarf, the nanoscale has become a giant focus of contemporary science and technology. We will examine the fundamental issues underlying the excitement involved in nanoscale research - what, why and how. Specific topics include assembly, properties,...
Optimization of Transistor Design for Carbon Nanotubes
20 Jan 2006 | | Contributor(s):: Jing Guo
We have developed a self-consistent atomistic simulator for CNTFETs.Using the simulator, we show that a recently reported high-performanceCNTFET delivers a near ballistic on-current. The off-state, however, issignificantly degraded because the CNTFET operates like anon-conventional Schottky...
Atomic Force Microscopy
01 Dec 2005 | | Contributor(s):: Arvind Raman
Atomic Force Microscopy (AFM) is an indispensible tool in nano science for the fabrication, metrology, manipulation, and property characterization of nanostructures. This tutorial reviews some of the physics of the interaction forces between the nanoscale tip and sample, the dynamics of the...
An Electrical Engineering Perspective on Molecular Electronics
26 Oct 2005 | | Contributor(s):: Mark Lundstrom
After forty years of advances in integrated circuit technology, microelectronics is undergoing a transformation to nanoelectronics. Modern day MOSFETs now have channel lengths that are less than 50 nm long, and billion transistor logic chips have arrived. Moore's Law continues, but the end of...
Semiconductor Interfaces at the Nanoscale
17 Oct 2005 | | Contributor(s):: David Janes
The trend in downscaling of electronic devices and the need to add functionalities such as sensing and nonvolatile memory to existing circuitry dictate that new approaches be developed for device structures and fabrication technologies. Various device technologies are being investigated,...
On the Reliability of Micro-Electronic Devices: An Introductory Lecture on Negative Bias Temperature Instability
28 Sep 2005 | | Contributor(s):: Muhammad A. Alam
In 1930s Bell Labs scientists chose to focus on Siand Ge, rather than better known semiconductors like Ag2S and Cu2S, mostly because of their reliable performance. Their choice was rewarded with the invention of bipolar transistors several years later. In 1960s, scientists at Fairchild worked...
21 Jul 2005 | | Contributor(s):: Gerhard Klimeck
Quantum Dots are man-made artificial atoms that confine electrons to a small space. As such, they have atomic-like behavior and enable the study of quantum mechanical effects on a length scale that is around 100 times larger than the pure atomic scale. Quantum dots offer application...
Nanostructure Engineered Sensors for Gas Detection in Space and Terrestrial Applications
28 Jul 2005 |
A nanosensor technology has been developed using single walled carbon nanotubes (SWNTs) on a pair of interdigitated electrodes (IDE) processed with a silicon-based microfabrication and micromachining technique. These sensors have been exposed to nitrogen dioxide, methane, acetone, benzene,...
A New Terahertz Heterodyne Detector Based on Single-Walled Carbon Nanotubes
27 Jul 2005 |
We present non-invasive methods for improving the sensitivity of label-free biosensors that offer the advantage of rapid and real-time detection but suffer from relatively low sensitivity. We present detection of cancer markers using the Quartz Crystal Microbalance and demonstrate that 2...
The Bardeen Transfer Hamiltonian Approach to Tunneling and its Application to STM/Carbon Nanotubes
05 May 2004 | | Contributor(s):: Peter M. Albrecht, Kyle Adam Ritter, Laura B. Ruppalt
This presentation covers the Bardeen Transfer Hamiltonian approach to tunneling and its application to STM/carbon nanotubes.
Moore's Law Forever?
13 Jul 2005 | | Contributor(s):: Mark Lundstrom
This talk covers the big technological changes in the 20th and 21st century that were correctly predicted by Gordon Moore in 1965. Moore's Law states that the number of transistors on a silicon chip doubles every technology generation. In 1960s terms that meant every 12 months and currently this...
Nanomaterials: Quantum Dots, Nanowires and Nanotubes
15 Jul 2005 |
What is a quantum dot? What is a nanowire? What is a nanotube? Why are these interesting and what are their potential applications? How are they made? This presentation is intended to begin to answer these questions while introducing some fundamental concepts such as wave-particle duality,...
Nanodevices: A Bottom-up View
13 Jun 2005 | | Contributor(s):: Supriyo Datta
It is common to differentiate between two ways of building a nanodevice: a top-down approach where we start from something big and chisel out what we want and a bottom-up approach where we start from something small like atoms or molecules and assemble what we want.