Find information on common issues.
Ask questions and find answers from other users.
Suggest a new site feature or improvement.
Check on status of your tickets.
ECE 695A Lecture 19: Spin-Dependent Recombination and Electrically Detected Magnetic Resonance
01 Mar 2013 | Online Presentations | Contributor(s): Muhammad Alam
Importance of measuring interface damage
Electronic Spin Resonance ( A quick review)
Spin Dependent Recombination
Electrically detected spin-resonance and noise-...
ECE 695A Lecture 17R: Review Questions
What is wrong with using C-V measurement methods exclusively for NBTI and HCI degradation?
Why do people like to use C-V techniques? What method would you use for HCI...
ECE 695A Lecture 18R: Review Questions
Between DCIV and CP methods, which one is easier and why?
In what ways are CP and DCIV methods better at characterizing traps compared to C-V methods?
What are the...
ECE 595E Lecture 17: Applications of the Beam Propagation Method II
01 Mar 2013 | Online Presentations | Contributor(s): Peter Bermel
ECE 595E Lecture 18: FEM for Thermal Transport
Recap from Monday
Thermal transfer overview
[Illinois] ECE 416 Electrochemical Sensors
27 Feb 2013 | Online Presentations | Contributor(s): Brian Cunningham
In this lecture, we begin discussing the three types of electrochemical sensors: Potentiometric, Amperometric, and Conductometry....
[Illinois] ECE 416 Glucose Sensor I
In this lecture, we continue the discussion on the oxygen sensor. It starts with a review of the measurement of O2 concentration...
[Illinois] ECE 416 Glucose Sensor II
In this lecture, we looked at the three generations of the glucose sensor and the ways it has changed. The first generation was...
[Illinois] ECE 416 Acoustic Wave Sensors
In this lecture, we look at the concepts and theories behind the acoustic wave sensor. This sensor communicates through the...
[Illinois] ECE 416 Mass Transport II
26 Feb 2013 | Online Presentations | Contributor(s): Brian Cunningham
In this lecture, we look at the mass transfer coefficient of association and dissociation rates of molecules on the biosensor and...
[Illinois] ECE 416 Bio Structure/Function II + Mass Transport I
In this lecture, the roles of antibodies and their structures are elaborated on from the last lecture. Then, there is a revision...
[Illinois] ECE 416 Assay Formats
In this lecture, assays, which is the most widely used technique to detect molecules on surfaces are discussed. In the direct...
PHYS 620 Lecture 6: Valence Band: Spin-Orbit Coupling and Stress Effects
25 Feb 2013 | Online Presentations | Contributor(s): Roberto Merlin
PHYS 620 Lecture 11: Excitons II
ECE 695A Lecture 18: DC-IV and Charge Pumping Methods
25 Feb 2013 | Online Presentations | Contributor(s): Muhammad Alam
Recall: Properties of Interface Defects
Flux-based method 1: Direct Current-Voltage method
Flux-based method 2: Charge pumping method
ECE 695A Lecture 16: Review Questions
22 Feb 2013 | Online Presentations | Contributor(s): Muhammad Alam
What is the difference between hot atom dissociation vs. cold atom dissociation?.
Many experiments are reported at 77K and 295K. Why these temperatures?.
Why is there such...
ECE 695A Lecture 17: Subthreshold and Idlin Methods
21 Feb 2013 | Online Presentations | Contributor(s): Muhammad Alam
ECE 595E Lecture 16: Applications of the Beam Propagation Method I
21 Feb 2013 | Online Presentations | Contributor(s): Peter Bermel
ECE 695A Lecture 15R: Review Questions
20 Feb 2013 | Online Presentations | Contributor(s): Muhammad Alam
Why is BTBT tunneling important for OFF-state HCI, but nor for ON-state HCI?
What type of bond dissociation dominated DeMOS degradation? Provide two supporting arguments....
PHYS 620 Lecture 1: Introduction
20 Feb 2013 | Teaching Materials | Contributor(s): Roberto Merlin
Lecture notes only.