-
Finite Differences in Heat Conduction
19 Aug 2019 | | Contributor(s):: Adam Powell
Calculate computational work required to model heat conduction using finite differences with explicit timestepping.
-
How Plasmonic Materials Make Light Work at Nanoscale
16 Aug 2019 | | Contributor(s):: Alexandra Boltasseva
-
Crystal Viewer Lab (New Interactive Front End)
16 Aug 2019 | | Contributor(s):: Daniel F Mejia, Gerhard Klimeck, Yuanchen Chu
Visualize and interact with various Crystalline Materials and all Bravais Lattices
-
Radiation in Electrostatic Levitation
15 Aug 2019 | | Contributor(s):: Adam Powell
Calculate total power radiated between square plates and a levitated spherical droplet, and discuss heat conduction mechanisms in the droplet.
-
Radiation in facing Target Sputtering
15 Aug 2019 | | Contributor(s):: Adam Powell
Calculate radiation viewfactors and rates of heat transfer between plates in a facing target sputtering apparatus for depositing yttrium-barium-copper oxide superconducting thin films.
-
Water Disinfection by Electroporation
14 Aug 2019 |
Estimate flow rate of water between two metal plates due to a pressure drop, and maximum flow rate which deactivates bateria.
-
Tank Drainage Through a Rising Tube
14 Aug 2019 |
Calculate pressures and velocities in a water tank draining through a tube which rises slightly after exit.
-
Multicomponent Evaporation I: Evaporation of Volatile Impurities During Electron Beam Melting
14 Aug 2019 | | Contributor(s):: Adam Powell
Calculate conversion efficiency for electron beam melting for removal of lead, cadmium and zinc impurities from titanium.
-
Multicomponent Evaporation II: Evaporation of Alloying Elements from Titanium
14 Aug 2019 | | Contributor(s):: Adam Powell
Evaluate effects of differential evaporation of titanium and its alloying elements aluminum and vanadium on electron beam melting and evaporation processes.
-
In-situ Mechanical Tests in X-Ray Microscope on Addictive Manufacture Anisotropic Rock Sample
14 Aug 2019 | | Contributor(s):: Liyang Jiang
This work explores the effects of layers and mineral texture on fracture evolution. Three-point bending and unconfined compressive strength tests were performed on the 3D printed gypsum samples with a Deben CT5000 in-situ stage inside a Zeiss Xradia 510 X-ray microscope....
-
Introduction to X-ray Microscopy (XRM): Technology and Applications for Lab-based Non-destructive, High-resolution 3D Imaging and Analysis
09 Aug 2019 | | Contributor(s):: John Kelley
This talk will cover an overview of XRM technology as well as prominent examples and applications.
-
3D X-Ray Microscopy Workshop
09 Aug 2019 | | Contributor(s):: Laura Pyrak-Nolte (organizer)
This workshop will cover an overview of XRM technology as well as provide prominent examples and applications.
-
Decarburization of Solid Low-Carbon Steel
01 Aug 2019 | | Contributor(s):: Adam Powell
Calculate carbon concentration profile vs. time in low-carbon steel sheet in a decarburizing atmosphere at high Biot number.
-
Drive-in Diffusion of Semiconductor Dopant
01 Aug 2019 | | Contributor(s):: Adam Powell
Sketch concentration profiles and calculate depth vs. time of n-type layer growing by drive-in diffusion.
-
Application of Integral Analysis to Semi-infinite Diffusion Couple
01 Aug 2019 | | Contributor(s):: Matthew John M. Krane
Apply integral analysis to semi-infinite diffusion couple.
-
Void Fraction Calculator
25 Jul 2019 | | Contributor(s):: Julian C Umeh, Thomas A Manz
Calculates the void fraction (pore volume) of nano-porous materials
-
Using Polymer Science to Improve High-Performance Concrete
30 Jun 2019 | | Contributor(s):: Kendra A. Erk
-
PRISMS-PF: Equilibrium Shape for a Misfitting Precipitate
10 Jun 2019 | | Contributor(s):: Stephen DeWitt, Nicole Shuman, Susan P Gentry
Use the phase field method to determine the equilibrium shape of precipitate with misfit strain relative to the matrix.
-
SMART Films Tutorials
05 Jun 2019 | | Contributor(s):: Ali Shakouri (organizer)
-
Chemical Vapor Deposition Reactor Design
28 May 2019 | | Contributor(s):: Adam Powell
Sketch the streamlines in a tube CVD reactor and propose a design change which would lead to more uniform deposition.