In-situ Mechanical Tests in X-Ray Microscope on Addictive Manufacture Anisotropic Rock Sample
14 Aug 2019 | | Contributor(s):: Liyang Jiang
This work explores the effects of layers and mineral texture on fracture evolution. Three-point bending and unconfined compressive strength tests were performed on the 3D printed gypsum samples with a Deben CT5000 in-situ stage inside a Zeiss Xradia 510 X-ray microscope....
Introduction to X-ray Microscopy (XRM): Technology and Applications for Lab-based Non-destructive, High-resolution 3D Imaging and Analysis
09 Aug 2019 | | Contributor(s):: John Kelley
This talk will cover an overview of XRM technology as well as prominent examples and applications.
X-Ray Micro-Computed Tomography Characterization of the Internal Microstructure of 3D Printed Hardened Cement-based Materials
09 Aug 2019 | | Contributor(s):: Mohamadreza Moini
In our research a lab-based X-ray microscope was used to perform micro-CT evaluations to explore the microstructural characteristics of 3-day old intact (i.e. not tested) 3D printed and cast hardened cement paste specimens at two levels of magnification: 0.4X and 4X. ...
3D X-Ray Microscopy Workshop
09 Aug 2019 | | Contributor(s):: Laura Pyrak-Nolte (organizer)
This workshop will cover an overview of XRM technology as well as provide prominent examples and applications.