source: branches/blt4/src/Doxyfile @ 1642

Last change on this file since 1642 was 125, checked in by dkearney, 18 years ago

1) removed "as" string from c++'s element() function because
the function does not have the capacity to return anything
other than RpLibrary? Instances
2) changed get() functions in library module to return strings.
this change was propagated to matlab, octave, c, fortran, c++
bindings.
3) fixed rpFreeLibrary inside of c interface, now function accepts
a pointer to a pointer to RpLibrary? (lib) and sets *lib equal to
null
4) added doxygen target to makefile. (make docs), to get graphics
you need the program named dot (debian: apt-get install graphviz)
otherwise you will get errors for the portion of the proceedure
where it is trying to create the graphics.

File size: 50.4 KB
Line 
1# Doxyfile 1.4.5
2
3# This file describes the settings to be used by the documentation system
4# doxygen (www.doxygen.org) for a project
5#
6# All text after a hash (#) is considered a comment and will be ignored
7# The format is:
8#       TAG = value [value, ...]
9# For lists items can also be appended using:
10#       TAG += value [value, ...]
11# Values that contain spaces should be placed between quotes (" ")
12
13#---------------------------------------------------------------------------
14# Project related configuration options
15#---------------------------------------------------------------------------
16
17# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
18# by quotes) that should identify the project.
19
20PROJECT_NAME           = Rappture
21
22# The PROJECT_NUMBER tag can be used to enter a project or revision number.
23# This could be handy for archiving the generated documentation or
24# if some version control system is used.
25
26PROJECT_NUMBER         =
27
28# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
29# base path where the generated documentation will be put.
30# If a relative path is entered, it will be relative to the location
31# where doxygen was started. If left blank the current directory will be used.
32
33OUTPUT_DIRECTORY       = docs/doxygen
34
35# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
36# 4096 sub-directories (in 2 levels) under the output directory of each output
37# format and will distribute the generated files over these directories.
38# Enabling this option can be useful when feeding doxygen a huge amount of
39# source files, where putting all generated files in the same directory would
40# otherwise cause performance problems for the file system.
41
42CREATE_SUBDIRS         = NO
43
44# The OUTPUT_LANGUAGE tag is used to specify the language in which all
45# documentation generated by doxygen is written. Doxygen will use this
46# information to generate all constant output in the proper language.
47# The default language is English, other supported languages are:
48# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish,
49# Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese,
50# Japanese-en (Japanese with English messages), Korean, Korean-en, Norwegian,
51# Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish,
52# Swedish, and Ukrainian.
53
54OUTPUT_LANGUAGE        = English
55
56# This tag can be used to specify the encoding used in the generated output.
57# The encoding is not always determined by the language that is chosen,
58# but also whether or not the output is meant for Windows or non-Windows users.
59# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES
60# forces the Windows encoding (this is the default for the Windows binary),
61# whereas setting the tag to NO uses a Unix-style encoding (the default for
62# all platforms other than Windows).
63
64USE_WINDOWS_ENCODING   = NO
65
66# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
67# include brief member descriptions after the members that are listed in
68# the file and class documentation (similar to JavaDoc).
69# Set to NO to disable this.
70
71BRIEF_MEMBER_DESC      = YES
72
73# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
74# the brief description of a member or function before the detailed description.
75# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
76# brief descriptions will be completely suppressed.
77
78REPEAT_BRIEF           = YES
79
80# This tag implements a quasi-intelligent brief description abbreviator
81# that is used to form the text in various listings. Each string
82# in this list, if found as the leading text of the brief description, will be
83# stripped from the text and the result after processing the whole list, is
84# used as the annotated text. Otherwise, the brief description is used as-is.
85# If left blank, the following values are used ("$name" is automatically
86# replaced with the name of the entity): "The $name class" "The $name widget"
87# "The $name file" "is" "provides" "specifies" "contains"
88# "represents" "a" "an" "the"
89
90ABBREVIATE_BRIEF       =
91
92# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
93# Doxygen will generate a detailed section even if there is only a brief
94# description.
95
96ALWAYS_DETAILED_SEC    = NO
97
98# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
99# inherited members of a class in the documentation of that class as if those
100# members were ordinary class members. Constructors, destructors and assignment
101# operators of the base classes will not be shown.
102
103INLINE_INHERITED_MEMB  = NO
104
105# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
106# path before files name in the file list and in the header files. If set
107# to NO the shortest path that makes the file name unique will be used.
108
109FULL_PATH_NAMES        = NO
110
111# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
112# can be used to strip a user-defined part of the path. Stripping is
113# only done if one of the specified strings matches the left-hand part of
114# the path. The tag can be used to show relative paths in the file list.
115# If left blank the directory from which doxygen is run is used as the
116# path to strip.
117
118STRIP_FROM_PATH        =
119
120# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
121# the path mentioned in the documentation of a class, which tells
122# the reader which header file to include in order to use a class.
123# If left blank only the name of the header file containing the class
124# definition is used. Otherwise one should specify the include paths that
125# are normally passed to the compiler using the -I flag.
126
127STRIP_FROM_INC_PATH    =
128
129# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
130# (but less readable) file names. This can be useful is your file systems
131# doesn't support long names like on DOS, Mac, or CD-ROM.
132
133SHORT_NAMES            = NO
134
135# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
136# will interpret the first line (until the first dot) of a JavaDoc-style
137# comment as the brief description. If set to NO, the JavaDoc
138# comments will behave just like the Qt-style comments (thus requiring an
139# explicit @brief command for a brief description.
140
141JAVADOC_AUTOBRIEF      = NO
142
143# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
144# treat a multi-line C++ special comment block (i.e. a block of //! or ///
145# comments) as a brief description. This used to be the default behaviour.
146# The new default is to treat a multi-line C++ comment block as a detailed
147# description. Set this tag to YES if you prefer the old behaviour instead.
148
149MULTILINE_CPP_IS_BRIEF = NO
150
151# If the DETAILS_AT_TOP tag is set to YES then Doxygen
152# will output the detailed description near the top, like JavaDoc.
153# If set to NO, the detailed description appears after the member
154# documentation.
155
156DETAILS_AT_TOP         = NO
157
158# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
159# member inherits the documentation from any documented member that it
160# re-implements.
161
162INHERIT_DOCS           = YES
163
164# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
165# a new page for each member. If set to NO, the documentation of a member will
166# be part of the file/class/namespace that contains it.
167
168SEPARATE_MEMBER_PAGES  = NO
169
170# The TAB_SIZE tag can be used to set the number of spaces in a tab.
171# Doxygen uses this value to replace tabs by spaces in code fragments.
172
173TAB_SIZE               = 8
174
175# This tag can be used to specify a number of aliases that acts
176# as commands in the documentation. An alias has the form "name=value".
177# For example adding "sideeffect=\par Side Effects:\n" will allow you to
178# put the command \sideeffect (or @sideeffect) in the documentation, which
179# will result in a user-defined paragraph with heading "Side Effects:".
180# You can put \n's in the value part of an alias to insert newlines.
181
182ALIASES                =
183
184# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
185# sources only. Doxygen will then generate output that is more tailored for C.
186# For instance, some of the names that are used will be different. The list
187# of all members will be omitted, etc.
188
189OPTIMIZE_OUTPUT_FOR_C  = NO
190
191# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
192# sources only. Doxygen will then generate output that is more tailored for Java.
193# For instance, namespaces will be presented as packages, qualified scopes
194# will look different, etc.
195
196OPTIMIZE_OUTPUT_JAVA   = NO
197
198# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want to
199# include (a tag file for) the STL sources as input, then you should
200# set this tag to YES in order to let doxygen match functions declarations and
201# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
202# func(std::string) {}). This also make the inheritance and collaboration
203# diagrams that involve STL classes more complete and accurate.
204
205BUILTIN_STL_SUPPORT    = NO
206
207# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
208# tag is set to YES, then doxygen will reuse the documentation of the first
209# member in the group (if any) for the other members of the group. By default
210# all members of a group must be documented explicitly.
211
212DISTRIBUTE_GROUP_DOC   = NO
213
214# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
215# the same type (for instance a group of public functions) to be put as a
216# subgroup of that type (e.g. under the Public Functions section). Set it to
217# NO to prevent subgrouping. Alternatively, this can be done per class using
218# the \nosubgrouping command.
219
220SUBGROUPING            = YES
221
222#---------------------------------------------------------------------------
223# Build related configuration options
224#---------------------------------------------------------------------------
225
226# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
227# documentation are documented, even if no documentation was available.
228# Private class members and static file members will be hidden unless
229# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
230
231EXTRACT_ALL            = YES
232
233# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
234# will be included in the documentation.
235
236EXTRACT_PRIVATE        = YES
237
238# If the EXTRACT_STATIC tag is set to YES all static members of a file
239# will be included in the documentation.
240
241EXTRACT_STATIC         = NO
242
243# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
244# defined locally in source files will be included in the documentation.
245# If set to NO only classes defined in header files are included.
246
247EXTRACT_LOCAL_CLASSES  = YES
248
249# This flag is only useful for Objective-C code. When set to YES local
250# methods, which are defined in the implementation section but not in
251# the interface are included in the documentation.
252# If set to NO (the default) only methods in the interface are included.
253
254EXTRACT_LOCAL_METHODS  = NO
255
256# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
257# undocumented members of documented classes, files or namespaces.
258# If set to NO (the default) these members will be included in the
259# various overviews, but no documentation section is generated.
260# This option has no effect if EXTRACT_ALL is enabled.
261
262HIDE_UNDOC_MEMBERS     = NO
263
264# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
265# undocumented classes that are normally visible in the class hierarchy.
266# If set to NO (the default) these classes will be included in the various
267# overviews. This option has no effect if EXTRACT_ALL is enabled.
268
269HIDE_UNDOC_CLASSES     = NO
270
271# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
272# friend (class|struct|union) declarations.
273# If set to NO (the default) these declarations will be included in the
274# documentation.
275
276HIDE_FRIEND_COMPOUNDS  = NO
277
278# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
279# documentation blocks found inside the body of a function.
280# If set to NO (the default) these blocks will be appended to the
281# function's detailed documentation block.
282
283HIDE_IN_BODY_DOCS      = NO
284
285# The INTERNAL_DOCS tag determines if documentation
286# that is typed after a \internal command is included. If the tag is set
287# to NO (the default) then the documentation will be excluded.
288# Set it to YES to include the internal documentation.
289
290INTERNAL_DOCS          = NO
291
292# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
293# file names in lower-case letters. If set to YES upper-case letters are also
294# allowed. This is useful if you have classes or files whose names only differ
295# in case and if your file system supports case sensitive file names. Windows
296# and Mac users are advised to set this option to NO.
297
298CASE_SENSE_NAMES       = YES
299
300# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
301# will show members with their full class and namespace scopes in the
302# documentation. If set to YES the scope will be hidden.
303
304HIDE_SCOPE_NAMES       = NO
305
306# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
307# will put a list of the files that are included by a file in the documentation
308# of that file.
309
310SHOW_INCLUDE_FILES     = YES
311
312# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
313# is inserted in the documentation for inline members.
314
315INLINE_INFO            = YES
316
317# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
318# will sort the (detailed) documentation of file and class members
319# alphabetically by member name. If set to NO the members will appear in
320# declaration order.
321
322SORT_MEMBER_DOCS       = YES
323
324# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
325# brief documentation of file, namespace and class members alphabetically
326# by member name. If set to NO (the default) the members will appear in
327# declaration order.
328
329SORT_BRIEF_DOCS        = NO
330
331# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
332# sorted by fully-qualified names, including namespaces. If set to
333# NO (the default), the class list will be sorted only by class name,
334# not including the namespace part.
335# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
336# Note: This option applies only to the class list, not to the
337# alphabetical list.
338
339SORT_BY_SCOPE_NAME     = NO
340
341# The GENERATE_TODOLIST tag can be used to enable (YES) or
342# disable (NO) the todo list. This list is created by putting \todo
343# commands in the documentation.
344
345GENERATE_TODOLIST      = YES
346
347# The GENERATE_TESTLIST tag can be used to enable (YES) or
348# disable (NO) the test list. This list is created by putting \test
349# commands in the documentation.
350
351GENERATE_TESTLIST      = YES
352
353# The GENERATE_BUGLIST tag can be used to enable (YES) or
354# disable (NO) the bug list. This list is created by putting \bug
355# commands in the documentation.
356
357GENERATE_BUGLIST       = YES
358
359# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
360# disable (NO) the deprecated list. This list is created by putting
361# \deprecated commands in the documentation.
362
363GENERATE_DEPRECATEDLIST= YES
364
365# The ENABLED_SECTIONS tag can be used to enable conditional
366# documentation sections, marked by \if sectionname ... \endif.
367
368ENABLED_SECTIONS       =
369
370# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
371# the initial value of a variable or define consists of for it to appear in
372# the documentation. If the initializer consists of more lines than specified
373# here it will be hidden. Use a value of 0 to hide initializers completely.
374# The appearance of the initializer of individual variables and defines in the
375# documentation can be controlled using \showinitializer or \hideinitializer
376# command in the documentation regardless of this setting.
377
378MAX_INITIALIZER_LINES  = 30
379
380# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
381# at the bottom of the documentation of classes and structs. If set to YES the
382# list will mention the files that were used to generate the documentation.
383
384SHOW_USED_FILES        = YES
385
386# If the sources in your project are distributed over multiple directories
387# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
388# in the documentation. The default is YES.
389
390SHOW_DIRECTORIES       = YES
391
392# The FILE_VERSION_FILTER tag can be used to specify a program or script that
393# doxygen should invoke to get the current version for each file (typically from the
394# version control system). Doxygen will invoke the program by executing (via
395# popen()) the command <command> <input-file>, where <command> is the value of
396# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
397# provided by doxygen. Whatever the program writes to standard output
398# is used as the file version. See the manual for examples.
399
400FILE_VERSION_FILTER    =
401
402#---------------------------------------------------------------------------
403# configuration options related to warning and progress messages
404#---------------------------------------------------------------------------
405
406# The QUIET tag can be used to turn on/off the messages that are generated
407# by doxygen. Possible values are YES and NO. If left blank NO is used.
408
409QUIET                  = NO
410
411# The WARNINGS tag can be used to turn on/off the warning messages that are
412# generated by doxygen. Possible values are YES and NO. If left blank
413# NO is used.
414
415WARNINGS               = YES
416
417# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
418# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
419# automatically be disabled.
420
421WARN_IF_UNDOCUMENTED   = YES
422
423# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
424# potential errors in the documentation, such as not documenting some
425# parameters in a documented function, or documenting parameters that
426# don't exist or using markup commands wrongly.
427
428WARN_IF_DOC_ERROR      = YES
429
430# This WARN_NO_PARAMDOC option can be abled to get warnings for
431# functions that are documented, but have no documentation for their parameters
432# or return value. If set to NO (the default) doxygen will only warn about
433# wrong or incomplete parameter documentation, but not about the absence of
434# documentation.
435
436WARN_NO_PARAMDOC       = NO
437
438# The WARN_FORMAT tag determines the format of the warning messages that
439# doxygen can produce. The string should contain the $file, $line, and $text
440# tags, which will be replaced by the file and line number from which the
441# warning originated and the warning text. Optionally the format may contain
442# $version, which will be replaced by the version of the file (if it could
443# be obtained via FILE_VERSION_FILTER)
444
445WARN_FORMAT            = "$file:$line: $text"
446
447# The WARN_LOGFILE tag can be used to specify a file to which warning
448# and error messages should be written. If left blank the output is written
449# to stderr.
450
451WARN_LOGFILE           =
452
453#---------------------------------------------------------------------------
454# configuration options related to the input files
455#---------------------------------------------------------------------------
456
457# The INPUT tag can be used to specify the files and/or directories that contain
458# documented source files. You may enter file names like "myfile.cpp" or
459# directories like "/usr/src/myproject". Separate the files or directories
460# with spaces.
461
462INPUT                  = core               \
463                         cee                \
464                         fortran            \
465                         matlab             \
466                         octave             \
467                         python             \
468                         ../include/core    \
469                         ../include/cee     \
470                         ../include/fortran \
471                         ../include/matlab  \
472                         ../include/octave  \
473                         ../include/python
474
475# If the value of the INPUT tag contains directories, you can use the
476# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
477# and *.h) to filter out the source-files in the directories. If left
478# blank the following patterns are tested:
479# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
480# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py
481
482FILE_PATTERNS          =
483
484# The RECURSIVE tag can be used to turn specify whether or not subdirectories
485# should be searched for input files as well. Possible values are YES and NO.
486# If left blank NO is used.
487
488RECURSIVE              = NO
489
490# The EXCLUDE tag can be used to specify files and/or directories that should
491# excluded from the INPUT source files. This way you can easily exclude a
492# subdirectory from a directory tree whose root is specified with the INPUT tag.
493
494EXCLUDE                =
495
496# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
497# directories that are symbolic links (a Unix filesystem feature) are excluded
498# from the input.
499
500EXCLUDE_SYMLINKS       = NO
501
502# If the value of the INPUT tag contains directories, you can use the
503# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
504# certain files from those directories. Note that the wildcards are matched
505# against the file with absolute path, so to exclude all test directories
506# for example use the pattern */test/*
507
508EXCLUDE_PATTERNS       =
509
510# The EXAMPLE_PATH tag can be used to specify one or more files or
511# directories that contain example code fragments that are included (see
512# the \include command).
513
514EXAMPLE_PATH           =
515
516# If the value of the EXAMPLE_PATH tag contains directories, you can use the
517# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
518# and *.h) to filter out the source-files in the directories. If left
519# blank all files are included.
520
521EXAMPLE_PATTERNS       =
522
523# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
524# searched for input files to be used with the \include or \dontinclude
525# commands irrespective of the value of the RECURSIVE tag.
526# Possible values are YES and NO. If left blank NO is used.
527
528EXAMPLE_RECURSIVE      = NO
529
530# The IMAGE_PATH tag can be used to specify one or more files or
531# directories that contain image that are included in the documentation (see
532# the \image command).
533
534IMAGE_PATH             =
535
536# The INPUT_FILTER tag can be used to specify a program that doxygen should
537# invoke to filter for each input file. Doxygen will invoke the filter program
538# by executing (via popen()) the command <filter> <input-file>, where <filter>
539# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
540# input file. Doxygen will then use the output that the filter program writes
541# to standard output.  If FILTER_PATTERNS is specified, this tag will be
542# ignored.
543
544INPUT_FILTER           =
545
546# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
547# basis.  Doxygen will compare the file name with each pattern and apply the
548# filter if there is a match.  The filters are a list of the form:
549# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
550# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
551# is applied to all files.
552
553FILTER_PATTERNS        =
554
555# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
556# INPUT_FILTER) will be used to filter the input files when producing source
557# files to browse (i.e. when SOURCE_BROWSER is set to YES).
558
559FILTER_SOURCE_FILES    = NO
560
561#---------------------------------------------------------------------------
562# configuration options related to source browsing
563#---------------------------------------------------------------------------
564
565# If the SOURCE_BROWSER tag is set to YES then a list of source files will
566# be generated. Documented entities will be cross-referenced with these sources.
567# Note: To get rid of all source code in the generated output, make sure also
568# VERBATIM_HEADERS is set to NO.
569
570SOURCE_BROWSER         = NO
571
572# Setting the INLINE_SOURCES tag to YES will include the body
573# of functions and classes directly in the documentation.
574
575INLINE_SOURCES         = NO
576
577# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
578# doxygen to hide any special comment blocks from generated source code
579# fragments. Normal C and C++ comments will always remain visible.
580
581STRIP_CODE_COMMENTS    = YES
582
583# If the REFERENCED_BY_RELATION tag is set to YES (the default)
584# then for each documented function all documented
585# functions referencing it will be listed.
586
587REFERENCED_BY_RELATION = YES
588
589# If the REFERENCES_RELATION tag is set to YES (the default)
590# then for each documented function all documented entities
591# called/used by that function will be listed.
592
593REFERENCES_RELATION    = YES
594
595# If the USE_HTAGS tag is set to YES then the references to source code
596# will point to the HTML generated by the htags(1) tool instead of doxygen
597# built-in source browser. The htags tool is part of GNU's global source
598# tagging system (see http://www.gnu.org/software/global/global.html). You
599# will need version 4.8.6 or higher.
600
601USE_HTAGS              = NO
602
603# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
604# will generate a verbatim copy of the header file for each class for
605# which an include is specified. Set to NO to disable this.
606
607VERBATIM_HEADERS       = YES
608
609#---------------------------------------------------------------------------
610# configuration options related to the alphabetical class index
611#---------------------------------------------------------------------------
612
613# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
614# of all compounds will be generated. Enable this if the project
615# contains a lot of classes, structs, unions or interfaces.
616
617ALPHABETICAL_INDEX     = NO
618
619# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
620# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
621# in which this list will be split (can be a number in the range [1..20])
622
623COLS_IN_ALPHA_INDEX    = 5
624
625# In case all classes in a project start with a common prefix, all
626# classes will be put under the same header in the alphabetical index.
627# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
628# should be ignored while generating the index headers.
629
630IGNORE_PREFIX          =
631
632#---------------------------------------------------------------------------
633# configuration options related to the HTML output
634#---------------------------------------------------------------------------
635
636# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
637# generate HTML output.
638
639GENERATE_HTML          = YES
640
641# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
642# If a relative path is entered the value of OUTPUT_DIRECTORY will be
643# put in front of it. If left blank `html' will be used as the default path.
644
645HTML_OUTPUT            = html
646
647# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
648# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
649# doxygen will generate files with .html extension.
650
651HTML_FILE_EXTENSION    = .html
652
653# The HTML_HEADER tag can be used to specify a personal HTML header for
654# each generated HTML page. If it is left blank doxygen will generate a
655# standard header.
656
657HTML_HEADER            =
658
659# The HTML_FOOTER tag can be used to specify a personal HTML footer for
660# each generated HTML page. If it is left blank doxygen will generate a
661# standard footer.
662
663HTML_FOOTER            =
664
665# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
666# style sheet that is used by each HTML page. It can be used to
667# fine-tune the look of the HTML output. If the tag is left blank doxygen
668# will generate a default style sheet. Note that doxygen will try to copy
669# the style sheet file to the HTML output directory, so don't put your own
670# stylesheet in the HTML output directory as well, or it will be erased!
671
672HTML_STYLESHEET        =
673
674# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
675# files or namespaces will be aligned in HTML using tables. If set to
676# NO a bullet list will be used.
677
678HTML_ALIGN_MEMBERS     = YES
679
680# If the GENERATE_HTMLHELP tag is set to YES, additional index files
681# will be generated that can be used as input for tools like the
682# Microsoft HTML help workshop to generate a compressed HTML help file (.chm)
683# of the generated HTML documentation.
684
685GENERATE_HTMLHELP      = NO
686
687# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
688# be used to specify the file name of the resulting .chm file. You
689# can add a path in front of the file if the result should not be
690# written to the html output directory.
691
692CHM_FILE               =
693
694# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
695# be used to specify the location (absolute path including file name) of
696# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
697# the HTML help compiler on the generated index.hhp.
698
699HHC_LOCATION           =
700
701# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
702# controls if a separate .chi index file is generated (YES) or that
703# it should be included in the master .chm file (NO).
704
705GENERATE_CHI           = NO
706
707# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
708# controls whether a binary table of contents is generated (YES) or a
709# normal table of contents (NO) in the .chm file.
710
711BINARY_TOC             = NO
712
713# The TOC_EXPAND flag can be set to YES to add extra items for group members
714# to the contents of the HTML help documentation and to the tree view.
715
716TOC_EXPAND             = NO
717
718# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
719# top of each HTML page. The value NO (the default) enables the index and
720# the value YES disables it.
721
722DISABLE_INDEX          = NO
723
724# This tag can be used to set the number of enum values (range [1..20])
725# that doxygen will group on one line in the generated HTML documentation.
726
727ENUM_VALUES_PER_LINE   = 4
728
729# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
730# generated containing a tree-like index structure (just like the one that
731# is generated for HTML Help). For this to work a browser that supports
732# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
733# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
734# probably better off using the HTML help feature.
735
736GENERATE_TREEVIEW      = NO
737
738# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
739# used to set the initial width (in pixels) of the frame in which the tree
740# is shown.
741
742TREEVIEW_WIDTH         = 250
743
744#---------------------------------------------------------------------------
745# configuration options related to the LaTeX output
746#---------------------------------------------------------------------------
747
748# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
749# generate Latex output.
750
751GENERATE_LATEX         = YES
752
753# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
754# If a relative path is entered the value of OUTPUT_DIRECTORY will be
755# put in front of it. If left blank `latex' will be used as the default path.
756
757LATEX_OUTPUT           = latex
758
759# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
760# invoked. If left blank `latex' will be used as the default command name.
761
762LATEX_CMD_NAME         = latex
763
764# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
765# generate index for LaTeX. If left blank `makeindex' will be used as the
766# default command name.
767
768MAKEINDEX_CMD_NAME     = makeindex
769
770# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
771# LaTeX documents. This may be useful for small projects and may help to
772# save some trees in general.
773
774COMPACT_LATEX          = NO
775
776# The PAPER_TYPE tag can be used to set the paper type that is used
777# by the printer. Possible values are: a4, a4wide, letter, legal and
778# executive. If left blank a4wide will be used.
779
780PAPER_TYPE             = a4wide
781
782# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
783# packages that should be included in the LaTeX output.
784
785EXTRA_PACKAGES         =
786
787# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
788# the generated latex document. The header should contain everything until
789# the first chapter. If it is left blank doxygen will generate a
790# standard header. Notice: only use this tag if you know what you are doing!
791
792LATEX_HEADER           =
793
794# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
795# is prepared for conversion to pdf (using ps2pdf). The pdf file will
796# contain links (just like the HTML output) instead of page references
797# This makes the output suitable for online browsing using a pdf viewer.
798
799PDF_HYPERLINKS         = NO
800
801# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
802# plain latex in the generated Makefile. Set this option to YES to get a
803# higher quality PDF documentation.
804
805USE_PDFLATEX           = NO
806
807# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
808# command to the generated LaTeX files. This will instruct LaTeX to keep
809# running if errors occur, instead of asking the user for help.
810# This option is also used when generating formulas in HTML.
811
812LATEX_BATCHMODE        = NO
813
814# If LATEX_HIDE_INDICES is set to YES then doxygen will not
815# include the index chapters (such as File Index, Compound Index, etc.)
816# in the output.
817
818LATEX_HIDE_INDICES     = NO
819
820#---------------------------------------------------------------------------
821# configuration options related to the RTF output
822#---------------------------------------------------------------------------
823
824# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
825# The RTF output is optimized for Word 97 and may not look very pretty with
826# other RTF readers or editors.
827
828GENERATE_RTF           = NO
829
830# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
831# If a relative path is entered the value of OUTPUT_DIRECTORY will be
832# put in front of it. If left blank `rtf' will be used as the default path.
833
834RTF_OUTPUT             = rtf
835
836# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
837# RTF documents. This may be useful for small projects and may help to
838# save some trees in general.
839
840COMPACT_RTF            = NO
841
842# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
843# will contain hyperlink fields. The RTF file will
844# contain links (just like the HTML output) instead of page references.
845# This makes the output suitable for online browsing using WORD or other
846# programs which support those fields.
847# Note: wordpad (write) and others do not support links.
848
849RTF_HYPERLINKS         = NO
850
851# Load stylesheet definitions from file. Syntax is similar to doxygen's
852# config file, i.e. a series of assignments. You only have to provide
853# replacements, missing definitions are set to their default value.
854
855RTF_STYLESHEET_FILE    =
856
857# Set optional variables used in the generation of an rtf document.
858# Syntax is similar to doxygen's config file.
859
860RTF_EXTENSIONS_FILE    =
861
862#---------------------------------------------------------------------------
863# configuration options related to the man page output
864#---------------------------------------------------------------------------
865
866# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
867# generate man pages
868
869GENERATE_MAN           = NO
870
871# The MAN_OUTPUT tag is used to specify where the man pages will be put.
872# If a relative path is entered the value of OUTPUT_DIRECTORY will be
873# put in front of it. If left blank `man' will be used as the default path.
874
875MAN_OUTPUT             = man
876
877# The MAN_EXTENSION tag determines the extension that is added to
878# the generated man pages (default is the subroutine's section .3)
879
880MAN_EXTENSION          = .3
881
882# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
883# then it will generate one additional man file for each entity
884# documented in the real man page(s). These additional files
885# only source the real man page, but without them the man command
886# would be unable to find the correct page. The default is NO.
887
888MAN_LINKS              = NO
889
890#---------------------------------------------------------------------------
891# configuration options related to the XML output
892#---------------------------------------------------------------------------
893
894# If the GENERATE_XML tag is set to YES Doxygen will
895# generate an XML file that captures the structure of
896# the code including all documentation.
897
898GENERATE_XML           = NO
899
900# The XML_OUTPUT tag is used to specify where the XML pages will be put.
901# If a relative path is entered the value of OUTPUT_DIRECTORY will be
902# put in front of it. If left blank `xml' will be used as the default path.
903
904XML_OUTPUT             = xml
905
906# The XML_SCHEMA tag can be used to specify an XML schema,
907# which can be used by a validating XML parser to check the
908# syntax of the XML files.
909
910XML_SCHEMA             =
911
912# The XML_DTD tag can be used to specify an XML DTD,
913# which can be used by a validating XML parser to check the
914# syntax of the XML files.
915
916XML_DTD                =
917
918# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
919# dump the program listings (including syntax highlighting
920# and cross-referencing information) to the XML output. Note that
921# enabling this will significantly increase the size of the XML output.
922
923XML_PROGRAMLISTING     = YES
924
925#---------------------------------------------------------------------------
926# configuration options for the AutoGen Definitions output
927#---------------------------------------------------------------------------
928
929# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
930# generate an AutoGen Definitions (see autogen.sf.net) file
931# that captures the structure of the code including all
932# documentation. Note that this feature is still experimental
933# and incomplete at the moment.
934
935GENERATE_AUTOGEN_DEF   = NO
936
937#---------------------------------------------------------------------------
938# configuration options related to the Perl module output
939#---------------------------------------------------------------------------
940
941# If the GENERATE_PERLMOD tag is set to YES Doxygen will
942# generate a Perl module file that captures the structure of
943# the code including all documentation. Note that this
944# feature is still experimental and incomplete at the
945# moment.
946
947GENERATE_PERLMOD       = NO
948
949# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
950# the necessary Makefile rules, Perl scripts and LaTeX code to be able
951# to generate PDF and DVI output from the Perl module output.
952
953PERLMOD_LATEX          = NO
954
955# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
956# nicely formatted so it can be parsed by a human reader.  This is useful
957# if you want to understand what is going on.  On the other hand, if this
958# tag is set to NO the size of the Perl module output will be much smaller
959# and Perl will parse it just the same.
960
961PERLMOD_PRETTY         = YES
962
963# The names of the make variables in the generated doxyrules.make file
964# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
965# This is useful so different doxyrules.make files included by the same
966# Makefile don't overwrite each other's variables.
967
968PERLMOD_MAKEVAR_PREFIX =
969
970#---------------------------------------------------------------------------
971# Configuration options related to the preprocessor   
972#---------------------------------------------------------------------------
973
974# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
975# evaluate all C-preprocessor directives found in the sources and include
976# files.
977
978ENABLE_PREPROCESSING   = YES
979
980# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
981# names in the source code. If set to NO (the default) only conditional
982# compilation will be performed. Macro expansion can be done in a controlled
983# way by setting EXPAND_ONLY_PREDEF to YES.
984
985MACRO_EXPANSION        = NO
986
987# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
988# then the macro expansion is limited to the macros specified with the
989# PREDEFINED and EXPAND_AS_DEFINED tags.
990
991EXPAND_ONLY_PREDEF     = NO
992
993# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
994# in the INCLUDE_PATH (see below) will be search if a #include is found.
995
996SEARCH_INCLUDES        = YES
997
998# The INCLUDE_PATH tag can be used to specify one or more directories that
999# contain include files that are not input files but should be processed by
1000# the preprocessor.
1001
1002INCLUDE_PATH           =
1003
1004# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
1005# patterns (like *.h and *.hpp) to filter out the header-files in the
1006# directories. If left blank, the patterns specified with FILE_PATTERNS will
1007# be used.
1008
1009INCLUDE_FILE_PATTERNS  =
1010
1011# The PREDEFINED tag can be used to specify one or more macro names that
1012# are defined before the preprocessor is started (similar to the -D option of
1013# gcc). The argument of the tag is a list of macros of the form: name
1014# or name=definition (no spaces). If the definition and the = are
1015# omitted =1 is assumed. To prevent a macro definition from being
1016# undefined via #undef or recursively expanded use the := operator
1017# instead of the = operator.
1018
1019PREDEFINED             =
1020
1021# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
1022# this tag can be used to specify a list of macro names that should be expanded.
1023# The macro definition that is found in the sources will be used.
1024# Use the PREDEFINED tag if you want to use a different macro definition.
1025
1026EXPAND_AS_DEFINED      =
1027
1028# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
1029# doxygen's preprocessor will remove all function-like macros that are alone
1030# on a line, have an all uppercase name, and do not end with a semicolon. Such
1031# function macros are typically used for boiler-plate code, and will confuse
1032# the parser if not removed.
1033
1034SKIP_FUNCTION_MACROS   = YES
1035
1036#---------------------------------------------------------------------------
1037# Configuration::additions related to external references   
1038#---------------------------------------------------------------------------
1039
1040# The TAGFILES option can be used to specify one or more tagfiles.
1041# Optionally an initial location of the external documentation
1042# can be added for each tagfile. The format of a tag file without
1043# this location is as follows:
1044#   TAGFILES = file1 file2 ...
1045# Adding location for the tag files is done as follows:
1046#   TAGFILES = file1=loc1 "file2 = loc2" ...
1047# where "loc1" and "loc2" can be relative or absolute paths or
1048# URLs. If a location is present for each tag, the installdox tool
1049# does not have to be run to correct the links.
1050# Note that each tag file must have a unique name
1051# (where the name does NOT include the path)
1052# If a tag file is not located in the directory in which doxygen
1053# is run, you must also specify the path to the tagfile here.
1054
1055TAGFILES               =
1056
1057# When a file name is specified after GENERATE_TAGFILE, doxygen will create
1058# a tag file that is based on the input files it reads.
1059
1060GENERATE_TAGFILE       =
1061
1062# If the ALLEXTERNALS tag is set to YES all external classes will be listed
1063# in the class index. If set to NO only the inherited external classes
1064# will be listed.
1065
1066ALLEXTERNALS           = NO
1067
1068# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
1069# in the modules index. If set to NO, only the current project's groups will
1070# be listed.
1071
1072EXTERNAL_GROUPS        = YES
1073
1074# The PERL_PATH should be the absolute path and name of the perl script
1075# interpreter (i.e. the result of `which perl').
1076
1077PERL_PATH              = /usr/bin/perl
1078
1079#---------------------------------------------------------------------------
1080# Configuration options related to the dot tool   
1081#---------------------------------------------------------------------------
1082
1083# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
1084# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
1085# or super classes. Setting the tag to NO turns the diagrams off. Note that
1086# this option is superseded by the HAVE_DOT option below. This is only a
1087# fallback. It is recommended to install and use dot, since it yields more
1088# powerful graphs.
1089
1090CLASS_DIAGRAMS         = YES
1091
1092# If set to YES, the inheritance and collaboration graphs will hide
1093# inheritance and usage relations if the target is undocumented
1094# or is not a class.
1095
1096HIDE_UNDOC_RELATIONS   = YES
1097
1098# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
1099# available from the path. This tool is part of Graphviz, a graph visualization
1100# toolkit from AT&T and Lucent Bell Labs. The other options in this section
1101# have no effect if this option is set to NO (the default)
1102
1103HAVE_DOT               = YES
1104
1105# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
1106# will generate a graph for each documented class showing the direct and
1107# indirect inheritance relations. Setting this tag to YES will force the
1108# the CLASS_DIAGRAMS tag to NO.
1109
1110CLASS_GRAPH            = YES
1111
1112# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
1113# will generate a graph for each documented class showing the direct and
1114# indirect implementation dependencies (inheritance, containment, and
1115# class references variables) of the class with other documented classes.
1116
1117COLLABORATION_GRAPH    = YES
1118
1119# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
1120# will generate a graph for groups, showing the direct groups dependencies
1121
1122GROUP_GRAPHS           = YES
1123
1124# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
1125# collaboration diagrams in a style similar to the OMG's Unified Modeling
1126# Language.
1127
1128UML_LOOK               = NO
1129
1130# If set to YES, the inheritance and collaboration graphs will show the
1131# relations between templates and their instances.
1132
1133TEMPLATE_RELATIONS     = YES
1134
1135# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
1136# tags are set to YES then doxygen will generate a graph for each documented
1137# file showing the direct and indirect include dependencies of the file with
1138# other documented files.
1139
1140INCLUDE_GRAPH          = YES
1141
1142# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
1143# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
1144# documented header file showing the documented files that directly or
1145# indirectly include this file.
1146
1147INCLUDED_BY_GRAPH      = YES
1148
1149# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will
1150# generate a call dependency graph for every global function or class method.
1151# Note that enabling this option will significantly increase the time of a run.
1152# So in most cases it will be better to enable call graphs for selected
1153# functions only using the \callgraph command.
1154
1155CALL_GRAPH             = NO
1156
1157# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
1158# will graphical hierarchy of all classes instead of a textual one.
1159
1160GRAPHICAL_HIERARCHY    = YES
1161
1162# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
1163# then doxygen will show the dependencies a directory has on other directories
1164# in a graphical way. The dependency relations are determined by the #include
1165# relations between the files in the directories.
1166
1167DIRECTORY_GRAPH        = YES
1168
1169# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1170# generated by dot. Possible values are png, jpg, or gif
1171# If left blank png will be used.
1172
1173DOT_IMAGE_FORMAT       = png
1174
1175# The tag DOT_PATH can be used to specify the path where the dot tool can be
1176# found. If left blank, it is assumed the dot tool can be found in the path.
1177
1178DOT_PATH               =
1179
1180# The DOTFILE_DIRS tag can be used to specify one or more directories that
1181# contain dot files that are included in the documentation (see the
1182# \dotfile command).
1183
1184DOTFILE_DIRS           =
1185
1186# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width
1187# (in pixels) of the graphs generated by dot. If a graph becomes larger than
1188# this value, doxygen will try to truncate the graph, so that it fits within
1189# the specified constraint. Beware that most browsers cannot cope with very
1190# large images.
1191
1192MAX_DOT_GRAPH_WIDTH    = 1024
1193
1194# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height
1195# (in pixels) of the graphs generated by dot. If a graph becomes larger than
1196# this value, doxygen will try to truncate the graph, so that it fits within
1197# the specified constraint. Beware that most browsers cannot cope with very
1198# large images.
1199
1200MAX_DOT_GRAPH_HEIGHT   = 1024
1201
1202# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
1203# graphs generated by dot. A depth value of 3 means that only nodes reachable
1204# from the root by following a path via at most 3 edges will be shown. Nodes
1205# that lay further from the root node will be omitted. Note that setting this
1206# option to 1 or 2 may greatly reduce the computation time needed for large
1207# code bases. Also note that a graph may be further truncated if the graph's
1208# image dimensions are not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH
1209# and MAX_DOT_GRAPH_HEIGHT). If 0 is used for the depth value (the default),
1210# the graph is not depth-constrained.
1211
1212MAX_DOT_GRAPH_DEPTH    = 0
1213
1214# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
1215# background. This is disabled by default, which results in a white background.
1216# Warning: Depending on the platform used, enabling this option may lead to
1217# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
1218# read).
1219
1220DOT_TRANSPARENT        = NO
1221
1222# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
1223# files in one run (i.e. multiple -o and -T options on the command line). This
1224# makes dot run faster, but since only newer versions of dot (>1.8.10)
1225# support this, this feature is disabled by default.
1226
1227DOT_MULTI_TARGETS      = NO
1228
1229# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
1230# generate a legend page explaining the meaning of the various boxes and
1231# arrows in the dot generated graphs.
1232
1233GENERATE_LEGEND        = YES
1234
1235# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
1236# remove the intermediate dot files that are used to generate
1237# the various graphs.
1238
1239DOT_CLEANUP            = YES
1240
1241#---------------------------------------------------------------------------
1242# Configuration::additions related to the search engine   
1243#---------------------------------------------------------------------------
1244
1245# The SEARCHENGINE tag specifies whether or not a search engine should be
1246# used. If set to NO the values of all tags below this one will be ignored.
1247
1248SEARCHENGINE           = NO
Note: See TracBrowser for help on using the repository browser.