source: nanovis/branches/1.1/Doxyfile.in @ 4617

Last change on this file since 4617 was 4612, checked in by ldelgass, 10 years ago

merge r3597 from trunk

File size: 62.5 KB
Line 
1# Doxyfile 1.6.1
2
3# This file describes the settings to be used by the documentation system
4# doxygen (www.doxygen.org) for a project
5#
6# All text after a hash (#) is considered a comment and will be ignored
7# The format is:
8#       TAG = value [value, ...]
9# For lists items can also be appended using:
10#       TAG += value [value, ...]
11# Values that contain spaces should be placed between quotes (" ")
12
13#---------------------------------------------------------------------------
14# Project related configuration options
15#---------------------------------------------------------------------------
16
17# This tag specifies the encoding used for all characters in the config file
18# that follow. The default is UTF-8 which is also the encoding used for all
19# text before the first occurrence of this tag. Doxygen uses libiconv (or the
20# iconv built into libc) for the transcoding. See
21# http://www.gnu.org/software/libiconv for the list of possible encodings.
22
23DOXYFILE_ENCODING      = UTF-8
24
25# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
26# by quotes) that should identify the project.
27
28PROJECT_NAME           = "HUBzero Nanovis Render Server"
29
30# The PROJECT_NUMBER tag can be used to enter a project or revision number.
31# This could be handy for archiving the generated documentation or
32# if some version control system is used.
33
34PROJECT_NUMBER         =
35
36# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
37# base path where the generated documentation will be put.
38# If a relative path is entered, it will be relative to the location
39# where doxygen was started. If left blank the current directory will be used.
40
41OUTPUT_DIRECTORY       = docs/doxygen
42
43# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
44# 4096 sub-directories (in 2 levels) under the output directory of each output
45# format and will distribute the generated files over these directories.
46# Enabling this option can be useful when feeding doxygen a huge amount of
47# source files, where putting all generated files in the same directory would
48# otherwise cause performance problems for the file system.
49
50CREATE_SUBDIRS         = NO
51
52# The OUTPUT_LANGUAGE tag is used to specify the language in which all
53# documentation generated by doxygen is written. Doxygen will use this
54# information to generate all constant output in the proper language.
55# The default language is English, other supported languages are:
56# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
57# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
58# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
59# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
60# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
61# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
62
63OUTPUT_LANGUAGE        = English
64
65# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
66# include brief member descriptions after the members that are listed in
67# the file and class documentation (similar to JavaDoc).
68# Set to NO to disable this.
69
70BRIEF_MEMBER_DESC      = YES
71
72# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
73# the brief description of a member or function before the detailed description.
74# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
75# brief descriptions will be completely suppressed.
76
77REPEAT_BRIEF           = YES
78
79# This tag implements a quasi-intelligent brief description abbreviator
80# that is used to form the text in various listings. Each string
81# in this list, if found as the leading text of the brief description, will be
82# stripped from the text and the result after processing the whole list, is
83# used as the annotated text. Otherwise, the brief description is used as-is.
84# If left blank, the following values are used ("$name" is automatically
85# replaced with the name of the entity): "The $name class" "The $name widget"
86# "The $name file" "is" "provides" "specifies" "contains"
87# "represents" "a" "an" "the"
88
89ABBREVIATE_BRIEF       =
90
91# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
92# Doxygen will generate a detailed section even if there is only a brief
93# description.
94
95ALWAYS_DETAILED_SEC    = NO
96
97# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
98# inherited members of a class in the documentation of that class as if those
99# members were ordinary class members. Constructors, destructors and assignment
100# operators of the base classes will not be shown.
101
102INLINE_INHERITED_MEMB  = NO
103
104# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
105# path before files name in the file list and in the header files. If set
106# to NO the shortest path that makes the file name unique will be used.
107
108FULL_PATH_NAMES        = YES
109
110# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
111# can be used to strip a user-defined part of the path. Stripping is
112# only done if one of the specified strings matches the left-hand part of
113# the path. The tag can be used to show relative paths in the file list.
114# If left blank the directory from which doxygen is run is used as the
115# path to strip.
116
117STRIP_FROM_PATH        =
118
119# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
120# the path mentioned in the documentation of a class, which tells
121# the reader which header file to include in order to use a class.
122# If left blank only the name of the header file containing the class
123# definition is used. Otherwise one should specify the include paths that
124# are normally passed to the compiler using the -I flag.
125
126STRIP_FROM_INC_PATH    =
127
128# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
129# (but less readable) file names. This can be useful is your file systems
130# doesn't support long names like on DOS, Mac, or CD-ROM.
131
132SHORT_NAMES            = NO
133
134# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
135# will interpret the first line (until the first dot) of a JavaDoc-style
136# comment as the brief description. If set to NO, the JavaDoc
137# comments will behave just like regular Qt-style comments
138# (thus requiring an explicit @brief command for a brief description.)
139
140JAVADOC_AUTOBRIEF      = NO
141
142# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
143# interpret the first line (until the first dot) of a Qt-style
144# comment as the brief description. If set to NO, the comments
145# will behave just like regular Qt-style comments (thus requiring
146# an explicit \brief command for a brief description.)
147
148QT_AUTOBRIEF           = NO
149
150# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
151# treat a multi-line C++ special comment block (i.e. a block of //! or ///
152# comments) as a brief description. This used to be the default behaviour.
153# The new default is to treat a multi-line C++ comment block as a detailed
154# description. Set this tag to YES if you prefer the old behaviour instead.
155
156MULTILINE_CPP_IS_BRIEF = NO
157
158# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
159# member inherits the documentation from any documented member that it
160# re-implements.
161
162INHERIT_DOCS           = YES
163
164# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
165# a new page for each member. If set to NO, the documentation of a member will
166# be part of the file/class/namespace that contains it.
167
168SEPARATE_MEMBER_PAGES  = NO
169
170# The TAB_SIZE tag can be used to set the number of spaces in a tab.
171# Doxygen uses this value to replace tabs by spaces in code fragments.
172
173TAB_SIZE               = 8
174
175# This tag can be used to specify a number of aliases that acts
176# as commands in the documentation. An alias has the form "name=value".
177# For example adding "sideeffect=\par Side Effects:\n" will allow you to
178# put the command \sideeffect (or @sideeffect) in the documentation, which
179# will result in a user-defined paragraph with heading "Side Effects:".
180# You can put \n's in the value part of an alias to insert newlines.
181
182ALIASES                =
183
184# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
185# sources only. Doxygen will then generate output that is more tailored for C.
186# For instance, some of the names that are used will be different. The list
187# of all members will be omitted, etc.
188
189OPTIMIZE_OUTPUT_FOR_C  = NO
190
191# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
192# sources only. Doxygen will then generate output that is more tailored for
193# Java. For instance, namespaces will be presented as packages, qualified
194# scopes will look different, etc.
195
196OPTIMIZE_OUTPUT_JAVA   = NO
197
198# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
199# sources only. Doxygen will then generate output that is more tailored for
200# Fortran.
201
202OPTIMIZE_FOR_FORTRAN   = NO
203
204# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
205# sources. Doxygen will then generate output that is tailored for
206# VHDL.
207
208OPTIMIZE_OUTPUT_VHDL   = NO
209
210# Doxygen selects the parser to use depending on the extension of the files it parses.
211# With this tag you can assign which parser to use for a given extension.
212# Doxygen has a built-in mapping, but you can override or extend it using this tag.
213# The format is ext=language, where ext is a file extension, and language is one of
214# the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP,
215# Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen treat
216# .inc files as Fortran files (default is PHP), and .f files as C (default is Fortran),
217# use: inc=Fortran f=C. Note that for custom extensions you also need to set
218# FILE_PATTERNS otherwise the files are not read by doxygen.
219
220EXTENSION_MAPPING      =
221
222# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
223# to include (a tag file for) the STL sources as input, then you should
224# set this tag to YES in order to let doxygen match functions declarations and
225# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
226# func(std::string) {}). This also make the inheritance and collaboration
227# diagrams that involve STL classes more complete and accurate.
228
229BUILTIN_STL_SUPPORT    = YES
230
231# If you use Microsoft's C++/CLI language, you should set this option to YES to
232# enable parsing support.
233
234CPP_CLI_SUPPORT        = NO
235
236# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
237# Doxygen will parse them like normal C++ but will assume all classes use public
238# instead of private inheritance when no explicit protection keyword is present.
239
240SIP_SUPPORT            = NO
241
242# For Microsoft's IDL there are propget and propput attributes to indicate getter
243# and setter methods for a property. Setting this option to YES (the default)
244# will make doxygen to replace the get and set methods by a property in the
245# documentation. This will only work if the methods are indeed getting or
246# setting a simple type. If this is not the case, or you want to show the
247# methods anyway, you should set this option to NO.
248
249IDL_PROPERTY_SUPPORT   = YES
250
251# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
252# tag is set to YES, then doxygen will reuse the documentation of the first
253# member in the group (if any) for the other members of the group. By default
254# all members of a group must be documented explicitly.
255
256DISTRIBUTE_GROUP_DOC   = NO
257
258# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
259# the same type (for instance a group of public functions) to be put as a
260# subgroup of that type (e.g. under the Public Functions section). Set it to
261# NO to prevent subgrouping. Alternatively, this can be done per class using
262# the \nosubgrouping command.
263
264SUBGROUPING            = YES
265
266# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
267# is documented as struct, union, or enum with the name of the typedef. So
268# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
269# with name TypeT. When disabled the typedef will appear as a member of a file,
270# namespace, or class. And the struct will be named TypeS. This can typically
271# be useful for C code in case the coding convention dictates that all compound
272# types are typedef'ed and only the typedef is referenced, never the tag name.
273
274TYPEDEF_HIDES_STRUCT   = NO
275
276# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
277# determine which symbols to keep in memory and which to flush to disk.
278# When the cache is full, less often used symbols will be written to disk.
279# For small to medium size projects (<1000 input files) the default value is
280# probably good enough. For larger projects a too small cache size can cause
281# doxygen to be busy swapping symbols to and from disk most of the time
282# causing a significant performance penality.
283# If the system has enough physical memory increasing the cache will improve the
284# performance by keeping more symbols in memory. Note that the value works on
285# a logarithmic scale so increasing the size by one will rougly double the
286# memory usage. The cache size is given by this formula:
287# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
288# corresponding to a cache size of 2^16 = 65536 symbols
289
290SYMBOL_CACHE_SIZE      = 0
291
292#---------------------------------------------------------------------------
293# Build related configuration options
294#---------------------------------------------------------------------------
295
296# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
297# documentation are documented, even if no documentation was available.
298# Private class members and static file members will be hidden unless
299# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
300
301EXTRACT_ALL            = YES
302
303# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
304# will be included in the documentation.
305
306EXTRACT_PRIVATE        = NO
307
308# If the EXTRACT_STATIC tag is set to YES all static members of a file
309# will be included in the documentation.
310
311EXTRACT_STATIC         = NO
312
313# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
314# defined locally in source files will be included in the documentation.
315# If set to NO only classes defined in header files are included.
316
317EXTRACT_LOCAL_CLASSES  = YES
318
319# This flag is only useful for Objective-C code. When set to YES local
320# methods, which are defined in the implementation section but not in
321# the interface are included in the documentation.
322# If set to NO (the default) only methods in the interface are included.
323
324EXTRACT_LOCAL_METHODS  = NO
325
326# If this flag is set to YES, the members of anonymous namespaces will be
327# extracted and appear in the documentation as a namespace called
328# 'anonymous_namespace{file}', where file will be replaced with the base
329# name of the file that contains the anonymous namespace. By default
330# anonymous namespace are hidden.
331
332EXTRACT_ANON_NSPACES   = NO
333
334# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
335# undocumented members of documented classes, files or namespaces.
336# If set to NO (the default) these members will be included in the
337# various overviews, but no documentation section is generated.
338# This option has no effect if EXTRACT_ALL is enabled.
339
340HIDE_UNDOC_MEMBERS     = NO
341
342# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
343# undocumented classes that are normally visible in the class hierarchy.
344# If set to NO (the default) these classes will be included in the various
345# overviews. This option has no effect if EXTRACT_ALL is enabled.
346
347HIDE_UNDOC_CLASSES     = NO
348
349# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
350# friend (class|struct|union) declarations.
351# If set to NO (the default) these declarations will be included in the
352# documentation.
353
354HIDE_FRIEND_COMPOUNDS  = NO
355
356# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
357# documentation blocks found inside the body of a function.
358# If set to NO (the default) these blocks will be appended to the
359# function's detailed documentation block.
360
361HIDE_IN_BODY_DOCS      = NO
362
363# The INTERNAL_DOCS tag determines if documentation
364# that is typed after a \internal command is included. If the tag is set
365# to NO (the default) then the documentation will be excluded.
366# Set it to YES to include the internal documentation.
367
368INTERNAL_DOCS          = NO
369
370# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
371# file names in lower-case letters. If set to YES upper-case letters are also
372# allowed. This is useful if you have classes or files whose names only differ
373# in case and if your file system supports case sensitive file names. Windows
374# and Mac users are advised to set this option to NO.
375
376CASE_SENSE_NAMES       = YES
377
378# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
379# will show members with their full class and namespace scopes in the
380# documentation. If set to YES the scope will be hidden.
381
382HIDE_SCOPE_NAMES       = NO
383
384# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
385# will put a list of the files that are included by a file in the documentation
386# of that file.
387
388SHOW_INCLUDE_FILES     = YES
389
390# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
391# is inserted in the documentation for inline members.
392
393INLINE_INFO            = YES
394
395# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
396# will sort the (detailed) documentation of file and class members
397# alphabetically by member name. If set to NO the members will appear in
398# declaration order.
399
400SORT_MEMBER_DOCS       = YES
401
402# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
403# brief documentation of file, namespace and class members alphabetically
404# by member name. If set to NO (the default) the members will appear in
405# declaration order.
406
407SORT_BRIEF_DOCS        = NO
408
409# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the (brief and detailed) documentation of class members so that constructors and destructors are listed first. If set to NO (the default) the constructors will appear in the respective orders defined by SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
410
411SORT_MEMBERS_CTORS_1ST = NO
412
413# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
414# hierarchy of group names into alphabetical order. If set to NO (the default)
415# the group names will appear in their defined order.
416
417SORT_GROUP_NAMES       = NO
418
419# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
420# sorted by fully-qualified names, including namespaces. If set to
421# NO (the default), the class list will be sorted only by class name,
422# not including the namespace part.
423# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
424# Note: This option applies only to the class list, not to the
425# alphabetical list.
426
427SORT_BY_SCOPE_NAME     = NO
428
429# The GENERATE_TODOLIST tag can be used to enable (YES) or
430# disable (NO) the todo list. This list is created by putting \todo
431# commands in the documentation.
432
433GENERATE_TODOLIST      = YES
434
435# The GENERATE_TESTLIST tag can be used to enable (YES) or
436# disable (NO) the test list. This list is created by putting \test
437# commands in the documentation.
438
439GENERATE_TESTLIST      = YES
440
441# The GENERATE_BUGLIST tag can be used to enable (YES) or
442# disable (NO) the bug list. This list is created by putting \bug
443# commands in the documentation.
444
445GENERATE_BUGLIST       = YES
446
447# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
448# disable (NO) the deprecated list. This list is created by putting
449# \deprecated commands in the documentation.
450
451GENERATE_DEPRECATEDLIST= YES
452
453# The ENABLED_SECTIONS tag can be used to enable conditional
454# documentation sections, marked by \if sectionname ... \endif.
455
456ENABLED_SECTIONS       =
457
458# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
459# the initial value of a variable or define consists of for it to appear in
460# the documentation. If the initializer consists of more lines than specified
461# here it will be hidden. Use a value of 0 to hide initializers completely.
462# The appearance of the initializer of individual variables and defines in the
463# documentation can be controlled using \showinitializer or \hideinitializer
464# command in the documentation regardless of this setting.
465
466MAX_INITIALIZER_LINES  = 30
467
468# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
469# at the bottom of the documentation of classes and structs. If set to YES the
470# list will mention the files that were used to generate the documentation.
471
472SHOW_USED_FILES        = YES
473
474# If the sources in your project are distributed over multiple directories
475# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
476# in the documentation. The default is NO.
477
478SHOW_DIRECTORIES       = NO
479
480# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
481# This will remove the Files entry from the Quick Index and from the
482# Folder Tree View (if specified). The default is YES.
483
484SHOW_FILES             = YES
485
486# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
487# Namespaces page.
488# This will remove the Namespaces entry from the Quick Index
489# and from the Folder Tree View (if specified). The default is YES.
490
491SHOW_NAMESPACES        = YES
492
493# The FILE_VERSION_FILTER tag can be used to specify a program or script that
494# doxygen should invoke to get the current version for each file (typically from
495# the version control system). Doxygen will invoke the program by executing (via
496# popen()) the command <command> <input-file>, where <command> is the value of
497# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
498# provided by doxygen. Whatever the program writes to standard output
499# is used as the file version. See the manual for examples.
500
501FILE_VERSION_FILTER    =
502
503# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by
504# doxygen. The layout file controls the global structure of the generated output files
505# in an output format independent way. The create the layout file that represents
506# doxygen's defaults, run doxygen with the -l option. You can optionally specify a
507# file name after the option, if omitted DoxygenLayout.xml will be used as the name
508# of the layout file.
509
510LAYOUT_FILE            =
511
512#---------------------------------------------------------------------------
513# configuration options related to warning and progress messages
514#---------------------------------------------------------------------------
515
516# The QUIET tag can be used to turn on/off the messages that are generated
517# by doxygen. Possible values are YES and NO. If left blank NO is used.
518
519QUIET                  = NO
520
521# The WARNINGS tag can be used to turn on/off the warning messages that are
522# generated by doxygen. Possible values are YES and NO. If left blank
523# NO is used.
524
525WARNINGS               = YES
526
527# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
528# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
529# automatically be disabled.
530
531WARN_IF_UNDOCUMENTED   = YES
532
533# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
534# potential errors in the documentation, such as not documenting some
535# parameters in a documented function, or documenting parameters that
536# don't exist or using markup commands wrongly.
537
538WARN_IF_DOC_ERROR      = YES
539
540# This WARN_NO_PARAMDOC option can be abled to get warnings for
541# functions that are documented, but have no documentation for their parameters
542# or return value. If set to NO (the default) doxygen will only warn about
543# wrong or incomplete parameter documentation, but not about the absence of
544# documentation.
545
546WARN_NO_PARAMDOC       = NO
547
548# The WARN_FORMAT tag determines the format of the warning messages that
549# doxygen can produce. The string should contain the $file, $line, and $text
550# tags, which will be replaced by the file and line number from which the
551# warning originated and the warning text. Optionally the format may contain
552# $version, which will be replaced by the version of the file (if it could
553# be obtained via FILE_VERSION_FILTER)
554
555WARN_FORMAT            = "$file:$line: $text"
556
557# The WARN_LOGFILE tag can be used to specify a file to which warning
558# and error messages should be written. If left blank the output is written
559# to stderr.
560
561WARN_LOGFILE           =
562
563#---------------------------------------------------------------------------
564# configuration options related to the input files
565#---------------------------------------------------------------------------
566
567# The INPUT tag can be used to specify the files and/or directories that contain
568# documented source files. You may enter file names like "myfile.cpp" or
569# directories like "/usr/src/myproject". Separate the files or directories
570# with spaces.
571
572INPUT                  = @srcdir@
573
574# This tag can be used to specify the character encoding of the source files
575# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
576# also the default input encoding. Doxygen uses libiconv (or the iconv built
577# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
578# the list of possible encodings.
579
580INPUT_ENCODING         = UTF-8
581
582# If the value of the INPUT tag contains directories, you can use the
583# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
584# and *.h) to filter out the source-files in the directories. If left
585# blank the following patterns are tested:
586# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
587# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
588
589FILE_PATTERNS          =
590
591# The RECURSIVE tag can be used to turn specify whether or not subdirectories
592# should be searched for input files as well. Possible values are YES and NO.
593# If left blank NO is used.
594
595RECURSIVE              = YES
596
597# The EXCLUDE tag can be used to specify files and/or directories that should
598# excluded from the INPUT source files. This way you can easily exclude a
599# subdirectory from a directory tree whose root is specified with the INPUT tag.
600
601EXCLUDE                = @srcdir@/newmat11 @srcdir@/CircularQueue.h @srcdir@/ParticleEmitter.h @srcdir@/ParticleEmitter.cpp @srcdir@/ParticleSystem.h @srcdir@/ParticleSystem.cpp @srcdir@/ParticleSystemFactory.h @srcdir@/ParticleSystemFactory.cpp @srcdir@/BucketSort.h @srcdir@/BucketSort.cpp @srcdir@/PCASplit.h @srcdir@/PCASplit.cpp @srcdir@/PointSet.h @srcdir@/PointSet.cpp @srcdir@/PointSetRenderer.h @srcdir@/PointSetRenderer.cpp @srcdir@/PointShader.h @srcdir@/PointShader.cpp
602
603# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
604# directories that are symbolic links (a Unix filesystem feature) are excluded
605# from the input.
606
607EXCLUDE_SYMLINKS       = NO
608
609# If the value of the INPUT tag contains directories, you can use the
610# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
611# certain files from those directories. Note that the wildcards are matched
612# against the file with absolute path, so to exclude all test directories
613# for example use the pattern */test/*
614
615EXCLUDE_PATTERNS       = */.svn/* */test/*
616
617# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
618# (namespaces, classes, functions, etc.) that should be excluded from the
619# output. The symbol name can be a fully qualified name, a word, or if the
620# wildcard * is used, a substring. Examples: ANamespace, AClass,
621# AClass::ANamespace, ANamespace::*Test
622
623EXCLUDE_SYMBOLS        =
624
625# The EXAMPLE_PATH tag can be used to specify one or more files or
626# directories that contain example code fragments that are included (see
627# the \include command).
628
629EXAMPLE_PATH           =
630
631# If the value of the EXAMPLE_PATH tag contains directories, you can use the
632# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
633# and *.h) to filter out the source-files in the directories. If left
634# blank all files are included.
635
636EXAMPLE_PATTERNS       =
637
638# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
639# searched for input files to be used with the \include or \dontinclude
640# commands irrespective of the value of the RECURSIVE tag.
641# Possible values are YES and NO. If left blank NO is used.
642
643EXAMPLE_RECURSIVE      = NO
644
645# The IMAGE_PATH tag can be used to specify one or more files or
646# directories that contain image that are included in the documentation (see
647# the \image command).
648
649IMAGE_PATH             =
650
651# The INPUT_FILTER tag can be used to specify a program that doxygen should
652# invoke to filter for each input file. Doxygen will invoke the filter program
653# by executing (via popen()) the command <filter> <input-file>, where <filter>
654# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
655# input file. Doxygen will then use the output that the filter program writes
656# to standard output.
657# If FILTER_PATTERNS is specified, this tag will be
658# ignored.
659
660INPUT_FILTER           =
661
662# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
663# basis.
664# Doxygen will compare the file name with each pattern and apply the
665# filter if there is a match.
666# The filters are a list of the form:
667# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
668# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
669# is applied to all files.
670
671FILTER_PATTERNS        =
672
673# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
674# INPUT_FILTER) will be used to filter the input files when producing source
675# files to browse (i.e. when SOURCE_BROWSER is set to YES).
676
677FILTER_SOURCE_FILES    = NO
678
679#---------------------------------------------------------------------------
680# configuration options related to source browsing
681#---------------------------------------------------------------------------
682
683# If the SOURCE_BROWSER tag is set to YES then a list of source files will
684# be generated. Documented entities will be cross-referenced with these sources.
685# Note: To get rid of all source code in the generated output, make sure also
686# VERBATIM_HEADERS is set to NO.
687
688SOURCE_BROWSER         = NO
689
690# Setting the INLINE_SOURCES tag to YES will include the body
691# of functions and classes directly in the documentation.
692
693INLINE_SOURCES         = NO
694
695# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
696# doxygen to hide any special comment blocks from generated source code
697# fragments. Normal C and C++ comments will always remain visible.
698
699STRIP_CODE_COMMENTS    = YES
700
701# If the REFERENCED_BY_RELATION tag is set to YES
702# then for each documented function all documented
703# functions referencing it will be listed.
704
705REFERENCED_BY_RELATION = NO
706
707# If the REFERENCES_RELATION tag is set to YES
708# then for each documented function all documented entities
709# called/used by that function will be listed.
710
711REFERENCES_RELATION    = NO
712
713# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
714# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
715# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
716# link to the source code.
717# Otherwise they will link to the documentation.
718
719REFERENCES_LINK_SOURCE = YES
720
721# If the USE_HTAGS tag is set to YES then the references to source code
722# will point to the HTML generated by the htags(1) tool instead of doxygen
723# built-in source browser. The htags tool is part of GNU's global source
724# tagging system (see http://www.gnu.org/software/global/global.html). You
725# will need version 4.8.6 or higher.
726
727USE_HTAGS              = NO
728
729# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
730# will generate a verbatim copy of the header file for each class for
731# which an include is specified. Set to NO to disable this.
732
733VERBATIM_HEADERS       = YES
734
735#---------------------------------------------------------------------------
736# configuration options related to the alphabetical class index
737#---------------------------------------------------------------------------
738
739# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
740# of all compounds will be generated. Enable this if the project
741# contains a lot of classes, structs, unions or interfaces.
742
743ALPHABETICAL_INDEX     = NO
744
745# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
746# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
747# in which this list will be split (can be a number in the range [1..20])
748
749COLS_IN_ALPHA_INDEX    = 5
750
751# In case all classes in a project start with a common prefix, all
752# classes will be put under the same header in the alphabetical index.
753# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
754# should be ignored while generating the index headers.
755
756IGNORE_PREFIX          =
757
758#---------------------------------------------------------------------------
759# configuration options related to the HTML output
760#---------------------------------------------------------------------------
761
762# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
763# generate HTML output.
764
765GENERATE_HTML          = YES
766
767# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
768# If a relative path is entered the value of OUTPUT_DIRECTORY will be
769# put in front of it. If left blank `html' will be used as the default path.
770
771HTML_OUTPUT            = html
772
773# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
774# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
775# doxygen will generate files with .html extension.
776
777HTML_FILE_EXTENSION    = .html
778
779# The HTML_HEADER tag can be used to specify a personal HTML header for
780# each generated HTML page. If it is left blank doxygen will generate a
781# standard header.
782
783HTML_HEADER            =
784
785# The HTML_FOOTER tag can be used to specify a personal HTML footer for
786# each generated HTML page. If it is left blank doxygen will generate a
787# standard footer.
788
789HTML_FOOTER            =
790
791# If the HTML_TIMESTAMP tag is set to YES then the generated HTML
792# documentation will contain the timesstamp.
793
794HTML_TIMESTAMP         = NO
795
796# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
797# style sheet that is used by each HTML page. It can be used to
798# fine-tune the look of the HTML output. If the tag is left blank doxygen
799# will generate a default style sheet. Note that doxygen will try to copy
800# the style sheet file to the HTML output directory, so don't put your own
801# stylesheet in the HTML output directory as well, or it will be erased!
802
803HTML_STYLESHEET        =
804
805# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
806# files or namespaces will be aligned in HTML using tables. If set to
807# NO a bullet list will be used.
808
809HTML_ALIGN_MEMBERS     = YES
810
811# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
812# documentation will contain sections that can be hidden and shown after the
813# page has loaded. For this to work a browser that supports
814# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
815# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
816
817HTML_DYNAMIC_SECTIONS  = NO
818
819# If the GENERATE_DOCSET tag is set to YES, additional index files
820# will be generated that can be used as input for Apple's Xcode 3
821# integrated development environment, introduced with OSX 10.5 (Leopard).
822# To create a documentation set, doxygen will generate a Makefile in the
823# HTML output directory. Running make will produce the docset in that
824# directory and running "make install" will install the docset in
825# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
826# it at startup.
827# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information.
828
829GENERATE_DOCSET        = NO
830
831# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
832# feed. A documentation feed provides an umbrella under which multiple
833# documentation sets from a single provider (such as a company or product suite)
834# can be grouped.
835
836DOCSET_FEEDNAME        = "Doxygen generated docs"
837
838# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
839# should uniquely identify the documentation set bundle. This should be a
840# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
841# will append .docset to the name.
842
843DOCSET_BUNDLE_ID       = org.doxygen.Project
844
845# If the GENERATE_HTMLHELP tag is set to YES, additional index files
846# will be generated that can be used as input for tools like the
847# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
848# of the generated HTML documentation.
849
850GENERATE_HTMLHELP      = NO
851
852# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
853# be used to specify the file name of the resulting .chm file. You
854# can add a path in front of the file if the result should not be
855# written to the html output directory.
856
857CHM_FILE               =
858
859# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
860# be used to specify the location (absolute path including file name) of
861# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
862# the HTML help compiler on the generated index.hhp.
863
864HHC_LOCATION           =
865
866# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
867# controls if a separate .chi index file is generated (YES) or that
868# it should be included in the master .chm file (NO).
869
870GENERATE_CHI           = NO
871
872# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
873# is used to encode HtmlHelp index (hhk), content (hhc) and project file
874# content.
875
876CHM_INDEX_ENCODING     =
877
878# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
879# controls whether a binary table of contents is generated (YES) or a
880# normal table of contents (NO) in the .chm file.
881
882BINARY_TOC             = NO
883
884# The TOC_EXPAND flag can be set to YES to add extra items for group members
885# to the contents of the HTML help documentation and to the tree view.
886
887TOC_EXPAND             = NO
888
889# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER
890# are set, an additional index file will be generated that can be used as input for
891# Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated
892# HTML documentation.
893
894GENERATE_QHP           = NO
895
896# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
897# be used to specify the file name of the resulting .qch file.
898# The path specified is relative to the HTML output folder.
899
900QCH_FILE               =
901
902# The QHP_NAMESPACE tag specifies the namespace to use when generating
903# Qt Help Project output. For more information please see
904# http://doc.trolltech.com/qthelpproject.html#namespace
905
906QHP_NAMESPACE          =
907
908# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
909# Qt Help Project output. For more information please see
910# http://doc.trolltech.com/qthelpproject.html#virtual-folders
911
912QHP_VIRTUAL_FOLDER     = doc
913
914# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to add.
915# For more information please see
916# http://doc.trolltech.com/qthelpproject.html#custom-filters
917
918QHP_CUST_FILTER_NAME   =
919
920# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the custom filter to add.For more information please see
921# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">Qt Help Project / Custom Filters</a>.
922
923QHP_CUST_FILTER_ATTRS  =
924
925# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project's
926# filter section matches.
927# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">Qt Help Project / Filter Attributes</a>.
928
929QHP_SECT_FILTER_ATTRS  =
930
931# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
932# be used to specify the location of Qt's qhelpgenerator.
933# If non-empty doxygen will try to run qhelpgenerator on the generated
934# .qhp file.
935
936QHG_LOCATION           =
937
938# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
939# top of each HTML page. The value NO (the default) enables the index and
940# the value YES disables it.
941
942DISABLE_INDEX          = NO
943
944# This tag can be used to set the number of enum values (range [1..20])
945# that doxygen will group on one line in the generated HTML documentation.
946
947ENUM_VALUES_PER_LINE   = 4
948
949# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
950# structure should be generated to display hierarchical information.
951# If the tag value is set to YES, a side panel will be generated
952# containing a tree-like index structure (just like the one that
953# is generated for HTML Help). For this to work a browser that supports
954# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
955# Windows users are probably better off using the HTML help feature.
956
957GENERATE_TREEVIEW      = NO
958
959# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
960# and Class Hierarchy pages using a tree view instead of an ordered list.
961
962USE_INLINE_TREES       = NO
963
964# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
965# used to set the initial width (in pixels) of the frame in which the tree
966# is shown.
967
968TREEVIEW_WIDTH         = 250
969
970# Use this tag to change the font size of Latex formulas included
971# as images in the HTML documentation. The default is 10. Note that
972# when you change the font size after a successful doxygen run you need
973# to manually remove any form_*.png images from the HTML output directory
974# to force them to be regenerated.
975
976FORMULA_FONTSIZE       = 10
977
978# When the SEARCHENGINE tag is enable doxygen will generate a search box for the HTML output. The underlying search engine uses javascript
979# and DHTML and should work on any modern browser. Note that when using HTML help (GENERATE_HTMLHELP) or Qt help (GENERATE_QHP)
980# there is already a search function so this one should typically
981# be disabled.
982
983SEARCHENGINE           = YES
984
985#---------------------------------------------------------------------------
986# configuration options related to the LaTeX output
987#---------------------------------------------------------------------------
988
989# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
990# generate Latex output.
991
992GENERATE_LATEX         = YES
993
994# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
995# If a relative path is entered the value of OUTPUT_DIRECTORY will be
996# put in front of it. If left blank `latex' will be used as the default path.
997
998LATEX_OUTPUT           = latex
999
1000# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
1001# invoked. If left blank `latex' will be used as the default command name.
1002
1003LATEX_CMD_NAME         = latex
1004
1005# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
1006# generate index for LaTeX. If left blank `makeindex' will be used as the
1007# default command name.
1008
1009MAKEINDEX_CMD_NAME     = makeindex
1010
1011# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
1012# LaTeX documents. This may be useful for small projects and may help to
1013# save some trees in general.
1014
1015COMPACT_LATEX          = NO
1016
1017# The PAPER_TYPE tag can be used to set the paper type that is used
1018# by the printer. Possible values are: a4, a4wide, letter, legal and
1019# executive. If left blank a4wide will be used.
1020
1021PAPER_TYPE             = a4wide
1022
1023# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
1024# packages that should be included in the LaTeX output.
1025
1026EXTRA_PACKAGES         =
1027
1028# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
1029# the generated latex document. The header should contain everything until
1030# the first chapter. If it is left blank doxygen will generate a
1031# standard header. Notice: only use this tag if you know what you are doing!
1032
1033LATEX_HEADER           =
1034
1035# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
1036# is prepared for conversion to pdf (using ps2pdf). The pdf file will
1037# contain links (just like the HTML output) instead of page references
1038# This makes the output suitable for online browsing using a pdf viewer.
1039
1040PDF_HYPERLINKS         = YES
1041
1042# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
1043# plain latex in the generated Makefile. Set this option to YES to get a
1044# higher quality PDF documentation.
1045
1046USE_PDFLATEX           = YES
1047
1048# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
1049# command to the generated LaTeX files. This will instruct LaTeX to keep
1050# running if errors occur, instead of asking the user for help.
1051# This option is also used when generating formulas in HTML.
1052
1053LATEX_BATCHMODE        = NO
1054
1055# If LATEX_HIDE_INDICES is set to YES then doxygen will not
1056# include the index chapters (such as File Index, Compound Index, etc.)
1057# in the output.
1058
1059LATEX_HIDE_INDICES     = NO
1060
1061# If LATEX_SOURCE_CODE is set to YES then doxygen will include source code with syntax highlighting in the LaTeX output. Note that which sources are shown also depends on other settings such as SOURCE_BROWSER.
1062
1063LATEX_SOURCE_CODE      = NO
1064
1065#---------------------------------------------------------------------------
1066# configuration options related to the RTF output
1067#---------------------------------------------------------------------------
1068
1069# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
1070# The RTF output is optimized for Word 97 and may not look very pretty with
1071# other RTF readers or editors.
1072
1073GENERATE_RTF           = NO
1074
1075# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
1076# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1077# put in front of it. If left blank `rtf' will be used as the default path.
1078
1079RTF_OUTPUT             = rtf
1080
1081# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
1082# RTF documents. This may be useful for small projects and may help to
1083# save some trees in general.
1084
1085COMPACT_RTF            = NO
1086
1087# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
1088# will contain hyperlink fields. The RTF file will
1089# contain links (just like the HTML output) instead of page references.
1090# This makes the output suitable for online browsing using WORD or other
1091# programs which support those fields.
1092# Note: wordpad (write) and others do not support links.
1093
1094RTF_HYPERLINKS         = NO
1095
1096# Load stylesheet definitions from file. Syntax is similar to doxygen's
1097# config file, i.e. a series of assignments. You only have to provide
1098# replacements, missing definitions are set to their default value.
1099
1100RTF_STYLESHEET_FILE    =
1101
1102# Set optional variables used in the generation of an rtf document.
1103# Syntax is similar to doxygen's config file.
1104
1105RTF_EXTENSIONS_FILE    =
1106
1107#---------------------------------------------------------------------------
1108# configuration options related to the man page output
1109#---------------------------------------------------------------------------
1110
1111# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
1112# generate man pages
1113
1114GENERATE_MAN           = NO
1115
1116# The MAN_OUTPUT tag is used to specify where the man pages will be put.
1117# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1118# put in front of it. If left blank `man' will be used as the default path.
1119
1120MAN_OUTPUT             = man
1121
1122# The MAN_EXTENSION tag determines the extension that is added to
1123# the generated man pages (default is the subroutine's section .3)
1124
1125MAN_EXTENSION          = .3
1126
1127# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
1128# then it will generate one additional man file for each entity
1129# documented in the real man page(s). These additional files
1130# only source the real man page, but without them the man command
1131# would be unable to find the correct page. The default is NO.
1132
1133MAN_LINKS              = NO
1134
1135#---------------------------------------------------------------------------
1136# configuration options related to the XML output
1137#---------------------------------------------------------------------------
1138
1139# If the GENERATE_XML tag is set to YES Doxygen will
1140# generate an XML file that captures the structure of
1141# the code including all documentation.
1142
1143GENERATE_XML           = NO
1144
1145# The XML_OUTPUT tag is used to specify where the XML pages will be put.
1146# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1147# put in front of it. If left blank `xml' will be used as the default path.
1148
1149XML_OUTPUT             = xml
1150
1151# The XML_SCHEMA tag can be used to specify an XML schema,
1152# which can be used by a validating XML parser to check the
1153# syntax of the XML files.
1154
1155XML_SCHEMA             =
1156
1157# The XML_DTD tag can be used to specify an XML DTD,
1158# which can be used by a validating XML parser to check the
1159# syntax of the XML files.
1160
1161XML_DTD                =
1162
1163# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
1164# dump the program listings (including syntax highlighting
1165# and cross-referencing information) to the XML output. Note that
1166# enabling this will significantly increase the size of the XML output.
1167
1168XML_PROGRAMLISTING     = YES
1169
1170#---------------------------------------------------------------------------
1171# configuration options for the AutoGen Definitions output
1172#---------------------------------------------------------------------------
1173
1174# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
1175# generate an AutoGen Definitions (see autogen.sf.net) file
1176# that captures the structure of the code including all
1177# documentation. Note that this feature is still experimental
1178# and incomplete at the moment.
1179
1180GENERATE_AUTOGEN_DEF   = NO
1181
1182#---------------------------------------------------------------------------
1183# configuration options related to the Perl module output
1184#---------------------------------------------------------------------------
1185
1186# If the GENERATE_PERLMOD tag is set to YES Doxygen will
1187# generate a Perl module file that captures the structure of
1188# the code including all documentation. Note that this
1189# feature is still experimental and incomplete at the
1190# moment.
1191
1192GENERATE_PERLMOD       = NO
1193
1194# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
1195# the necessary Makefile rules, Perl scripts and LaTeX code to be able
1196# to generate PDF and DVI output from the Perl module output.
1197
1198PERLMOD_LATEX          = NO
1199
1200# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
1201# nicely formatted so it can be parsed by a human reader.
1202# This is useful
1203# if you want to understand what is going on.
1204# On the other hand, if this
1205# tag is set to NO the size of the Perl module output will be much smaller
1206# and Perl will parse it just the same.
1207
1208PERLMOD_PRETTY         = YES
1209
1210# The names of the make variables in the generated doxyrules.make file
1211# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
1212# This is useful so different doxyrules.make files included by the same
1213# Makefile don't overwrite each other's variables.
1214
1215PERLMOD_MAKEVAR_PREFIX =
1216
1217#---------------------------------------------------------------------------
1218# Configuration options related to the preprocessor
1219#---------------------------------------------------------------------------
1220
1221# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
1222# evaluate all C-preprocessor directives found in the sources and include
1223# files.
1224
1225ENABLE_PREPROCESSING   = YES
1226
1227# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
1228# names in the source code. If set to NO (the default) only conditional
1229# compilation will be performed. Macro expansion can be done in a controlled
1230# way by setting EXPAND_ONLY_PREDEF to YES.
1231
1232MACRO_EXPANSION        = YES
1233
1234# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
1235# then the macro expansion is limited to the macros specified with the
1236# PREDEFINED and EXPAND_AS_DEFINED tags.
1237
1238EXPAND_ONLY_PREDEF     = NO
1239
1240# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
1241# in the INCLUDE_PATH (see below) will be search if a #include is found.
1242
1243SEARCH_INCLUDES        = YES
1244
1245# The INCLUDE_PATH tag can be used to specify one or more directories that
1246# contain include files that are not input files but should be processed by
1247# the preprocessor.
1248
1249INCLUDE_PATH           =
1250
1251# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
1252# patterns (like *.h and *.hpp) to filter out the header-files in the
1253# directories. If left blank, the patterns specified with FILE_PATTERNS will
1254# be used.
1255
1256INCLUDE_FILE_PATTERNS  =
1257
1258# The PREDEFINED tag can be used to specify one or more macro names that
1259# are defined before the preprocessor is started (similar to the -D option of
1260# gcc). The argument of the tag is a list of macros of the form: name
1261# or name=definition (no spaces). If the definition and the = are
1262# omitted =1 is assumed. To prevent a macro definition from being
1263# undefined via #undef or recursively expanded use the := operator
1264# instead of the = operator.
1265
1266PREDEFINED             =
1267
1268# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
1269# this tag can be used to specify a list of macro names that should be expanded.
1270# The macro definition that is found in the sources will be used.
1271# Use the PREDEFINED tag if you want to use a different macro definition.
1272
1273EXPAND_AS_DEFINED      =
1274
1275# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
1276# doxygen's preprocessor will remove all function-like macros that are alone
1277# on a line, have an all uppercase name, and do not end with a semicolon. Such
1278# function macros are typically used for boiler-plate code, and will confuse
1279# the parser if not removed.
1280
1281SKIP_FUNCTION_MACROS   = YES
1282
1283#---------------------------------------------------------------------------
1284# Configuration::additions related to external references
1285#---------------------------------------------------------------------------
1286
1287# The TAGFILES option can be used to specify one or more tagfiles.
1288# Optionally an initial location of the external documentation
1289# can be added for each tagfile. The format of a tag file without
1290# this location is as follows:
1291#
1292# TAGFILES = file1 file2 ...
1293# Adding location for the tag files is done as follows:
1294#
1295# TAGFILES = file1=loc1 "file2 = loc2" ...
1296# where "loc1" and "loc2" can be relative or absolute paths or
1297# URLs. If a location is present for each tag, the installdox tool
1298# does not have to be run to correct the links.
1299# Note that each tag file must have a unique name
1300# (where the name does NOT include the path)
1301# If a tag file is not located in the directory in which doxygen
1302# is run, you must also specify the path to the tagfile here.
1303
1304TAGFILES               =
1305
1306# When a file name is specified after GENERATE_TAGFILE, doxygen will create
1307# a tag file that is based on the input files it reads.
1308
1309GENERATE_TAGFILE       =
1310
1311# If the ALLEXTERNALS tag is set to YES all external classes will be listed
1312# in the class index. If set to NO only the inherited external classes
1313# will be listed.
1314
1315ALLEXTERNALS           = NO
1316
1317# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
1318# in the modules index. If set to NO, only the current project's groups will
1319# be listed.
1320
1321EXTERNAL_GROUPS        = YES
1322
1323# The PERL_PATH should be the absolute path and name of the perl script
1324# interpreter (i.e. the result of `which perl').
1325
1326PERL_PATH              = /usr/bin/perl
1327
1328#---------------------------------------------------------------------------
1329# Configuration options related to the dot tool
1330#---------------------------------------------------------------------------
1331
1332# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
1333# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
1334# or super classes. Setting the tag to NO turns the diagrams off. Note that
1335# this option is superseded by the HAVE_DOT option below. This is only a
1336# fallback. It is recommended to install and use dot, since it yields more
1337# powerful graphs.
1338
1339CLASS_DIAGRAMS         = YES
1340
1341# You can define message sequence charts within doxygen comments using the \msc
1342# command. Doxygen will then run the mscgen tool (see
1343# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
1344# documentation. The MSCGEN_PATH tag allows you to specify the directory where
1345# the mscgen tool resides. If left empty the tool is assumed to be found in the
1346# default search path.
1347
1348MSCGEN_PATH            =
1349
1350# If set to YES, the inheritance and collaboration graphs will hide
1351# inheritance and usage relations if the target is undocumented
1352# or is not a class.
1353
1354HIDE_UNDOC_RELATIONS   = YES
1355
1356# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
1357# available from the path. This tool is part of Graphviz, a graph visualization
1358# toolkit from AT&T and Lucent Bell Labs. The other options in this section
1359# have no effect if this option is set to NO (the default)
1360
1361HAVE_DOT               = YES
1362
1363# By default doxygen will write a font called FreeSans.ttf to the output
1364# directory and reference it in all dot files that doxygen generates. This
1365# font does not include all possible unicode characters however, so when you need
1366# these (or just want a differently looking font) you can specify the font name
1367# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
1368# which can be done by putting it in a standard location or by setting the
1369# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
1370# containing the font.
1371
1372DOT_FONTNAME           = FreeSans
1373
1374# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
1375# The default size is 10pt.
1376
1377DOT_FONTSIZE           = 10
1378
1379# By default doxygen will tell dot to use the output directory to look for the
1380# FreeSans.ttf font (which doxygen will put there itself). If you specify a
1381# different font using DOT_FONTNAME you can set the path where dot
1382# can find it using this tag.
1383
1384DOT_FONTPATH           =
1385
1386# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
1387# will generate a graph for each documented class showing the direct and
1388# indirect inheritance relations. Setting this tag to YES will force the
1389# the CLASS_DIAGRAMS tag to NO.
1390
1391CLASS_GRAPH            = YES
1392
1393# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
1394# will generate a graph for each documented class showing the direct and
1395# indirect implementation dependencies (inheritance, containment, and
1396# class references variables) of the class with other documented classes.
1397
1398COLLABORATION_GRAPH    = YES
1399
1400# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
1401# will generate a graph for groups, showing the direct groups dependencies
1402
1403GROUP_GRAPHS           = YES
1404
1405# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
1406# collaboration diagrams in a style similar to the OMG's Unified Modeling
1407# Language.
1408
1409UML_LOOK               = NO
1410
1411# If set to YES, the inheritance and collaboration graphs will show the
1412# relations between templates and their instances.
1413
1414TEMPLATE_RELATIONS     = NO
1415
1416# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
1417# tags are set to YES then doxygen will generate a graph for each documented
1418# file showing the direct and indirect include dependencies of the file with
1419# other documented files.
1420
1421INCLUDE_GRAPH          = YES
1422
1423# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
1424# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
1425# documented header file showing the documented files that directly or
1426# indirectly include this file.
1427
1428INCLUDED_BY_GRAPH      = YES
1429
1430# If the CALL_GRAPH and HAVE_DOT options are set to YES then
1431# doxygen will generate a call dependency graph for every global function
1432# or class method. Note that enabling this option will significantly increase
1433# the time of a run. So in most cases it will be better to enable call graphs
1434# for selected functions only using the \callgraph command.
1435
1436CALL_GRAPH             = NO
1437
1438# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
1439# doxygen will generate a caller dependency graph for every global function
1440# or class method. Note that enabling this option will significantly increase
1441# the time of a run. So in most cases it will be better to enable caller
1442# graphs for selected functions only using the \callergraph command.
1443
1444CALLER_GRAPH           = NO
1445
1446# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
1447# will graphical hierarchy of all classes instead of a textual one.
1448
1449GRAPHICAL_HIERARCHY    = YES
1450
1451# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
1452# then doxygen will show the dependencies a directory has on other directories
1453# in a graphical way. The dependency relations are determined by the #include
1454# relations between the files in the directories.
1455
1456DIRECTORY_GRAPH        = YES
1457
1458# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1459# generated by dot. Possible values are png, jpg, or gif
1460# If left blank png will be used.
1461
1462DOT_IMAGE_FORMAT       = png
1463
1464# The tag DOT_PATH can be used to specify the path where the dot tool can be
1465# found. If left blank, it is assumed the dot tool can be found in the path.
1466
1467DOT_PATH               =
1468
1469# The DOTFILE_DIRS tag can be used to specify one or more directories that
1470# contain dot files that are included in the documentation (see the
1471# \dotfile command).
1472
1473DOTFILE_DIRS           =
1474
1475# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
1476# nodes that will be shown in the graph. If the number of nodes in a graph
1477# becomes larger than this value, doxygen will truncate the graph, which is
1478# visualized by representing a node as a red box. Note that doxygen if the
1479# number of direct children of the root node in a graph is already larger than
1480# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
1481# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
1482
1483DOT_GRAPH_MAX_NODES    = 50
1484
1485# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
1486# graphs generated by dot. A depth value of 3 means that only nodes reachable
1487# from the root by following a path via at most 3 edges will be shown. Nodes
1488# that lay further from the root node will be omitted. Note that setting this
1489# option to 1 or 2 may greatly reduce the computation time needed for large
1490# code bases. Also note that the size of a graph can be further restricted by
1491# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
1492
1493MAX_DOT_GRAPH_DEPTH    = 0
1494
1495# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
1496# background. This is disabled by default, because dot on Windows does not
1497# seem to support this out of the box. Warning: Depending on the platform used,
1498# enabling this option may lead to badly anti-aliased labels on the edges of
1499# a graph (i.e. they become hard to read).
1500
1501DOT_TRANSPARENT        = NO
1502
1503# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
1504# files in one run (i.e. multiple -o and -T options on the command line). This
1505# makes dot run faster, but since only newer versions of dot (>1.8.10)
1506# support this, this feature is disabled by default.
1507
1508DOT_MULTI_TARGETS      = NO
1509
1510# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
1511# generate a legend page explaining the meaning of the various boxes and
1512# arrows in the dot generated graphs.
1513
1514GENERATE_LEGEND        = YES
1515
1516# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
1517# remove the intermediate dot files that are used to generate
1518# the various graphs.
1519
1520DOT_CLEANUP            = YES
Note: See TracBrowser for help on using the repository browser.