# -*- mode: tcl; indent-tabs-mode: nil -*- # ---------------------------------------------------------------------- # COMPONENT: vtkglyphviewer - Vtk 3D glyphs object viewer # # It connects to the Vtk server running on a rendering farm, # transmits data, and displays the results. # ====================================================================== # AUTHOR: Michael McLennan, Purdue University # Copyright (c) 2004-2005 Purdue Research Foundation # # See the file "license.terms" for information on usage and # redistribution of this file, and for a DISCLAIMER OF ALL WARRANTIES. # ====================================================================== package require Itk package require BLT #package require Img option add *VtkGlyphViewer.width 4i widgetDefault option add *VtkGlyphViewer*cursor crosshair widgetDefault option add *VtkGlyphViewer.height 4i widgetDefault option add *VtkGlyphViewer.foreground black widgetDefault option add *VtkGlyphViewer.controlBackground gray widgetDefault option add *VtkGlyphViewer.controlDarkBackground #999999 widgetDefault option add *VtkGlyphViewer.plotBackground black widgetDefault option add *VtkGlyphViewer.plotForeground white widgetDefault option add *VtkGlyphViewer.font \ -*-helvetica-medium-r-normal-*-12-* widgetDefault # must use this name -- plugs into Rappture::resources::load proc VtkGlyphViewer_init_resources {} { Rappture::resources::register \ vtkvis_server Rappture::VtkGlyphViewer::SetServerList } itcl::class Rappture::VtkGlyphViewer { inherit Rappture::VisViewer itk_option define -plotforeground plotForeground Foreground "" itk_option define -plotbackground plotBackground Background "" constructor { hostlist args } { Rappture::VisViewer::constructor $hostlist } { # defined below } destructor { # defined below } public proc SetServerList { namelist } { Rappture::VisViewer::SetServerList "vtkvis" $namelist } public method add {dataobj {settings ""}} public method camera {option args} public method delete {args} public method disconnect {} public method download {option args} public method get {args} public method isconnected {} public method limits { colormap } public method parameters {title args} { # do nothing } public method scale {args} protected method Connect {} protected method CurrentDatasets {args} protected method Disconnect {} protected method DoResize {} protected method DoRotate {} protected method AdjustSetting {what {value ""}} protected method InitSettings { args } protected method Pan {option x y} protected method Pick {x y} protected method Rebuild {} protected method ReceiveDataset { args } protected method ReceiveImage { args } protected method ReceiveLegend { colormap title vmin vmax size } protected method Rotate {option x y} protected method Zoom {option} # The following methods are only used by this class. private method BuildAxisTab {} private method BuildCameraTab {} private method BuildColormap { name } private method BuildCutplaneTab {} private method BuildDownloadPopup { widget command } private method BuildGlyphTab {} private method DrawLegend {} private method Combo { option } private method EnterLegend { x y } private method EventuallyResize { w h } private method EventuallyRotate { q } private method EventuallyRequestLegend {} private method EventuallySetCutplane { axis args } private method GetImage { args } private method GetVtkData { args } private method IsValidObject { dataobj } private method LeaveLegend {} private method MotionLegend { x y } private method PanCamera {} private method RequestLegend {} private method SetLegendTip { x y } private method SetObjectStyle { dataobj comp } private method Slice {option args} private method SetCurrentColormap { color } private method SetOrientation { side } private variable _arcball "" private variable _dlist "" ; # list of data objects private variable _obj2datasets private variable _obj2ovride ; # maps dataobj => style override private variable _datasets ; # contains all the dataobj-component ; # datasets in the server private variable _colormaps ; # contains all the colormaps ; # in the server. # The name of the current colormap used. The colormap is global to all # heightmaps displayed. private variable _currentColormap "" private variable _currentOpacity "" private variable _dataset2style ;# maps dataobj-component to transfunc private variable _click ; # info used for rotate operations private variable _limits ; # autoscale min/max for all axes private variable _view ; # view params for 3D view private variable _settings private variable _style; # Array of current component styles. private variable _changed private variable _initialStyle; # Array of initial component styles. private variable _reset 1; # indicates if camera needs to be reset # to starting position. private variable _first "" ; # This is the topmost dataset. private variable _start 0 private variable _title "" common _downloadPopup; # download options from popup private common _hardcopy private variable _width 0 private variable _height 0 private variable _resizePending 0 private variable _rotatePending 0 private variable _cutplanePending 0 private variable _legendPending 0 private variable _field "" private variable _colorMode "vmag"; # Mode of colormap (vmag or scalar) private variable _fieldNames {} private variable _fields private variable _curFldName "" private variable _curFldLabel "" } itk::usual VtkGlyphViewer { keep -background -foreground -cursor -font keep -plotbackground -plotforeground } # ---------------------------------------------------------------------- # CONSTRUCTOR # ---------------------------------------------------------------------- itcl::body Rappture::VtkGlyphViewer::constructor {hostlist args} { package require vtk set _serverType "vtkvis" # Rebuild event $_dispatcher register !rebuild $_dispatcher dispatch $this !rebuild "[itcl::code $this Rebuild]; list" # Resize event $_dispatcher register !resize $_dispatcher dispatch $this !resize "[itcl::code $this DoResize]; list" # Rotate event $_dispatcher register !rotate $_dispatcher dispatch $this !rotate "[itcl::code $this DoRotate]; list" # Legend event $_dispatcher register !legend $_dispatcher dispatch $this !legend "[itcl::code $this RequestLegend]; list" # X-Cutplane event $_dispatcher register !xcutplane $_dispatcher dispatch $this !xcutplane \ "[itcl::code $this AdjustSetting cutplaneXPosition]; list" # Y-Cutplane event $_dispatcher register !ycutplane $_dispatcher dispatch $this !ycutplane \ "[itcl::code $this AdjustSetting cutplaneYPosition]; list" # Z-Cutplane event $_dispatcher register !zcutplane $_dispatcher dispatch $this !zcutplane \ "[itcl::code $this AdjustSetting cutplaneZPosition]; list" # # Populate parser with commands handle incoming requests # $_parser alias image [itcl::code $this ReceiveImage] $_parser alias dataset [itcl::code $this ReceiveDataset] $_parser alias legend [itcl::code $this ReceiveLegend] # Initialize the view to some default parameters. array set _view { qw 0.853553 qx -0.353553 qy 0.353553 qz 0.146447 zoom 1.0 xpan 0 ypan 0 ortho 0 } set _arcball [blt::arcball create 100 100] set q [list $_view(qw) $_view(qx) $_view(qy) $_view(qz)] $_arcball quaternion $q array set _settings [subst { background black colormap BCGYR colormapVisible 1 field "Default" axesVisible 1 axisLabelsVisible 1 axisXGrid 0 axisYGrid 0 axisZGrid 0 cutplaneEdges 0 cutplaneLighting 1 cutplanePreinterp 0 cutplaneOpacity 100 cutplaneVisible 0 cutplaneWireframe 0 cutplaneXPosition 50 cutplaneXVisible 1 cutplaneYPosition 50 cutplaneYVisible 1 cutplaneZPosition 50 cutplaneZVisible 1 glyphEdges 0 glyphLighting 1 glyphOpacity 100 saveGlyphOpacity 100 glyphOutline 0 glyphVisible 1 glyphWireframe 0 legendVisible 1 }] array set _changed { glyphOpacity 0 colormap 0 } itk_component add view { canvas $itk_component(plotarea).view \ -highlightthickness 0 -borderwidth 0 } { usual ignore -highlightthickness -borderwidth -background } itk_component add fieldmenu { menu $itk_component(plotarea).menu -bg black -fg white -relief flat \ -tearoff no } { usual ignore -background -foreground -relief -tearoff } set c $itk_component(view) bind $c [itcl::code $this EventuallyResize %w %h] bind $c <4> [itcl::code $this Zoom in 0.25] bind $c <5> [itcl::code $this Zoom out 0.25] bind $c [list %W xview scroll 10 units] bind $c [list %W xview scroll -10 units] bind $c [list %W yview scroll 10 units] bind $c [list %W yview scroll -10 units] bind $c "focus %W" bind $c [itcl::code $this ToggleConsole] # Fix the scrollregion in case we go off screen $c configure -scrollregion [$c bbox all] set _map(id) [$c create image 0 0 -anchor nw -image $_image(plot)] set _map(cwidth) -1 set _map(cheight) -1 set _map(zoom) 1.0 set _map(original) "" set f [$itk_component(main) component controls] itk_component add reset { button $f.reset -borderwidth 1 -padx 1 -pady 1 \ -highlightthickness 0 \ -image [Rappture::icon reset-view] \ -command [itcl::code $this Zoom reset] } { usual ignore -highlightthickness } pack $itk_component(reset) -side top -padx 2 -pady 2 Rappture::Tooltip::for $itk_component(reset) \ "Reset the view to the default zoom level" itk_component add zoomin { button $f.zin -borderwidth 1 -padx 1 -pady 1 \ -highlightthickness 0 \ -image [Rappture::icon zoom-in] \ -command [itcl::code $this Zoom in] } { usual ignore -highlightthickness } pack $itk_component(zoomin) -side top -padx 2 -pady 2 Rappture::Tooltip::for $itk_component(zoomin) "Zoom in" itk_component add zoomout { button $f.zout -borderwidth 1 -padx 1 -pady 1 \ -highlightthickness 0 \ -image [Rappture::icon zoom-out] \ -command [itcl::code $this Zoom out] } { usual ignore -highlightthickness } pack $itk_component(zoomout) -side top -padx 2 -pady 2 Rappture::Tooltip::for $itk_component(zoomout) "Zoom out" itk_component add glyphs { Rappture::PushButton $f.glyphs \ -onimage [Rappture::icon volume-on] \ -offimage [Rappture::icon volume-off] \ -variable [itcl::scope _settings(glyphVisible)] \ -command [itcl::code $this AdjustSetting glyphVisible] } $itk_component(glyphs) select Rappture::Tooltip::for $itk_component(glyphs) \ "Don't display the glyphs" pack $itk_component(glyphs) -padx 2 -pady 2 itk_component add cutplane { Rappture::PushButton $f.cutplane \ -onimage [Rappture::icon cutbutton] \ -offimage [Rappture::icon cutbutton] \ -variable [itcl::scope _settings(cutplaneVisible)] \ -command [itcl::code $this AdjustSetting cutplaneVisible] } Rappture::Tooltip::for $itk_component(cutplane) \ "Show/Hide cutplanes" pack $itk_component(cutplane) -padx 2 -pady 2 if { [catch { BuildGlyphTab #BuildCutplaneTab BuildAxisTab BuildCameraTab } errs] != 0 } { puts stderr errs=$errs } # Legend set _image(legend) [image create photo] itk_component add legend { canvas $itk_component(plotarea).legend -width 50 -highlightthickness 0 } { usual ignore -highlightthickness rename -background -plotbackground plotBackground Background } # Hack around the Tk panewindow. The problem is that the requested # size of the 3d view isn't set until an image is retrieved from # the server. So the panewindow uses the tiny size. set w 10000 pack forget $itk_component(view) blt::table $itk_component(plotarea) \ 0,0 $itk_component(view) -fill both -reqwidth $w blt::table configure $itk_component(plotarea) c1 -resize none # Bindings for rotation via mouse bind $itk_component(view) \ [itcl::code $this Rotate click %x %y] bind $itk_component(view) \ [itcl::code $this Rotate drag %x %y] bind $itk_component(view) \ [itcl::code $this Rotate release %x %y] # Bindings for panning via mouse bind $itk_component(view) \ [itcl::code $this Pan click %x %y] bind $itk_component(view) \ [itcl::code $this Pan drag %x %y] bind $itk_component(view) \ [itcl::code $this Pan release %x %y] #bind $itk_component(view) \ # [itcl::code $this Pick %x %y] # Bindings for panning via keyboard bind $itk_component(view) \ [itcl::code $this Pan set -10 0] bind $itk_component(view) \ [itcl::code $this Pan set 10 0] bind $itk_component(view) \ [itcl::code $this Pan set 0 -10] bind $itk_component(view) \ [itcl::code $this Pan set 0 10] bind $itk_component(view) \ [itcl::code $this Pan set -2 0] bind $itk_component(view) \ [itcl::code $this Pan set 2 0] bind $itk_component(view) \ [itcl::code $this Pan set 0 -2] bind $itk_component(view) \ [itcl::code $this Pan set 0 2] # Bindings for zoom via keyboard bind $itk_component(view) \ [itcl::code $this Zoom out] bind $itk_component(view) \ [itcl::code $this Zoom in] bind $itk_component(view) "focus $itk_component(view)" if {[string equal "x11" [tk windowingsystem]]} { # Bindings for zoom via mouse bind $itk_component(view) <4> [itcl::code $this Zoom out] bind $itk_component(view) <5> [itcl::code $this Zoom in] } set _image(download) [image create photo] eval itk_initialize $args Connect update } # ---------------------------------------------------------------------- # DESTRUCTOR # ---------------------------------------------------------------------- itcl::body Rappture::VtkGlyphViewer::destructor {} { Disconnect image delete $_image(plot) image delete $_image(download) catch { blt::arcball destroy $_arcball } } itcl::body Rappture::VtkGlyphViewer::DoResize {} { if { $_width < 2 } { set _width 500 } if { $_height < 2 } { set _height 500 } set _start [clock clicks -milliseconds] SendCmd "screen size $_width $_height" EventuallyRequestLegend set _resizePending 0 } itcl::body Rappture::VtkGlyphViewer::DoRotate {} { set q [list $_view(qw) $_view(qx) $_view(qy) $_view(qz)] SendCmd "camera orient $q" set _rotatePending 0 } itcl::body Rappture::VtkGlyphViewer::EventuallyRequestLegend {} { if { !$_legendPending } { set _legendPending 1 $_dispatcher event -idle !legend } } itcl::body Rappture::VtkGlyphViewer::EventuallyResize { w h } { set _width $w set _height $h $_arcball resize $w $h if { !$_resizePending } { set _resizePending 1 $_dispatcher event -after 400 !resize } } set rotate_delay 100 itcl::body Rappture::VtkGlyphViewer::EventuallyRotate { q } { foreach { _view(qw) _view(qx) _view(qy) _view(qz) } $q break if { !$_rotatePending } { set _rotatePending 1 global rotate_delay $_dispatcher event -after $rotate_delay !rotate } } itcl::body Rappture::VtkGlyphViewer::EventuallySetCutplane { axis args } { if { !$_cutplanePending } { set _cutplanePending 1 $_dispatcher event -after 100 !${axis}cutplane } } # ---------------------------------------------------------------------- # USAGE: add ?? # # Clients use this to add a data object to the plot. The optional # are used to configure the plot. Allowed settings are # -color, -brightness, -width, -linestyle, and -raise. # ---------------------------------------------------------------------- itcl::body Rappture::VtkGlyphViewer::add {dataobj {settings ""}} { if { ![$dataobj isvalid] } { return; # Object doesn't contain valid data. } array set params { -color auto -width 1 -linestyle solid -brightness 0 -raise 0 -description "" -param "" -type "" } array set params $settings set params(-description) "" set params(-param) "" array set params $settings if {$params(-color) == "auto" || $params(-color) == "autoreset"} { # can't handle -autocolors yet set params(-color) black } set pos [lsearch -exact $_dlist $dataobj] if {$pos < 0} { lappend _dlist $dataobj } set _obj2ovride($dataobj-color) $params(-color) set _obj2ovride($dataobj-width) $params(-width) set _obj2ovride($dataobj-raise) $params(-raise) $_dispatcher event -idle !rebuild } # ---------------------------------------------------------------------- # USAGE: delete ? ...? # # Clients use this to delete a dataobj from the plot. If no dataobjs # are specified, then all dataobjs are deleted. No data objects are # deleted. They are only removed from the display list. # # ---------------------------------------------------------------------- itcl::body Rappture::VtkGlyphViewer::delete {args} { if { [llength $args] == 0} { set args $_dlist } # Delete all specified dataobjs set changed 0 foreach dataobj $args { set pos [lsearch -exact $_dlist $dataobj] if { $pos < 0 } { continue; # Don't know anything about it. } # Remove it from the dataobj list. set _dlist [lreplace $_dlist $pos $pos] array unset _obj2ovride $dataobj-* array unset _settings $dataobj-* set changed 1 } # If anything changed, then rebuild the plot if { $changed } { $_dispatcher event -idle !rebuild } } # ---------------------------------------------------------------------- # USAGE: get ?-objects? # USAGE: get ?-visible? # USAGE: get ?-image view? # # Clients use this to query the list of objects being plotted, in # order from bottom to top of this result. The optional "-image" # flag can also request the internal images being shown. # ---------------------------------------------------------------------- itcl::body Rappture::VtkGlyphViewer::get {args} { if {[llength $args] == 0} { set args "-objects" } set op [lindex $args 0] switch -- $op { "-objects" { # put the dataobj list in order according to -raise options set dlist {} foreach dataobj $_dlist { if { ![IsValidObject $dataobj] } { continue } if {[info exists _obj2ovride($dataobj-raise)] && $_obj2ovride($dataobj-raise)} { set dlist [linsert $dlist 0 $dataobj] } else { lappend dlist $dataobj } } return $dlist } "-visible" { set dlist {} foreach dataobj $_dlist { if { ![IsValidObject $dataobj] } { continue } if { ![info exists _obj2ovride($dataobj-raise)] } { # No setting indicates that the object isn't visible. continue } # Otherwise use the -raise parameter to put the object to # the front of the list. if { $_obj2ovride($dataobj-raise) } { set dlist [linsert $dlist 0 $dataobj] } else { lappend dlist $dataobj } } return $dlist } -image { if {[llength $args] != 2} { error "wrong # args: should be \"get -image view\"" } switch -- [lindex $args end] { view { return $_image(plot) } default { error "bad image name \"[lindex $args end]\": should be view" } } } default { error "bad option \"$op\": should be -objects or -image" } } } # ---------------------------------------------------------------------- # USAGE: scale ? ...? # # Sets the default limits for the overall plot according to the # limits of the data for all of the given objects. This # accounts for all objects--even those not showing on the screen. # Because of this, the limits are appropriate for all objects as # the user scans through data in the ResultSet viewer. # ---------------------------------------------------------------------- itcl::body Rappture::VtkGlyphViewer::scale { args } { foreach dataobj $args { if { ![$dataobj isvalid] } { continue; # Object doesn't contain valid data. } foreach axis { x y z } { set lim [$dataobj limits $axis] if { ![info exists _limits($axis)] } { set _limits($axis) $lim continue } foreach {min max} $lim break foreach {amin amax} $_limits($axis) break if { $amin > $min } { set amin $min } if { $amax < $max } { set amax $max } set _limits($axis) [list $amin $amax] } foreach { fname lim } [$dataobj fieldlimits] { if { ![info exists _limits($fname)] } { set _limits($fname) $lim continue } foreach {min max} $lim break foreach {fmin fmax} $_limits($fname) break if { $fmin > $min } { set fmin $min } if { $fmax < $max } { set fmax $max } set _limits($fname) [list $fmin $fmax] } } } # ---------------------------------------------------------------------- # USAGE: download coming # USAGE: download controls # USAGE: download now # # Clients use this method to create a downloadable representation # of the plot. Returns a list of the form {ext string}, where # "ext" is the file extension (indicating the type of data) and # "string" is the data itself. # ---------------------------------------------------------------------- itcl::body Rappture::VtkGlyphViewer::download {option args} { switch $option { coming { if {[catch { blt::winop snap $itk_component(plotarea) $_image(download) }]} { $_image(download) configure -width 1 -height 1 $_image(download) put #000000 } } controls { set popup .vtkviewerdownload if { ![winfo exists .vtkviewerdownload] } { set inner [BuildDownloadPopup $popup [lindex $args 0]] } else { set inner [$popup component inner] } set _downloadPopup(image_controls) $inner.image_frame set num [llength [get]] set num [expr {($num == 1) ? "1 result" : "$num results"}] set word [Rappture::filexfer::label downloadWord] $inner.summary configure -text "$word $num in the following format:" update idletasks ;# Fix initial sizes return $popup } now { set popup .vtkviewerdownload if {[winfo exists .vtkviewerdownload]} { $popup deactivate } switch -- $_downloadPopup(format) { "image" { return [$this GetImage [lindex $args 0]] } "vtk" { return [$this GetVtkData [lindex $args 0]] } } return "" } default { error "bad option \"$option\": should be coming, controls, now" } } } # ---------------------------------------------------------------------- # USAGE: Connect ?,...? # # Clients use this method to establish a connection to a new # server, or to reestablish a connection to the previous server. # Any existing connection is automatically closed. # ---------------------------------------------------------------------- itcl::body Rappture::VtkGlyphViewer::Connect {} { set _hosts [GetServerList "vtkvis"] if { "" == $_hosts } { return 0 } set result [VisViewer::Connect $_hosts] if { $result } { if { $_reportClientInfo } { # Tell the server the viewer, hub, user and session. # Do this immediately on connect before buffing any commands global env set info {} set user "???" if { [info exists env(USER)] } { set user $env(USER) } set session "???" if { [info exists env(SESSION)] } { set session $env(SESSION) } lappend info "hub" [exec hostname] lappend info "client" "vtkglyphviewer" lappend info "user" $user lappend info "session" $session SendCmd "clientinfo [list $info]" } set w [winfo width $itk_component(view)] set h [winfo height $itk_component(view)] EventuallyResize $w $h } return $result } # # isconnected -- # # Indicates if we are currently connected to the visualization server. # itcl::body Rappture::VtkGlyphViewer::isconnected {} { return [VisViewer::IsConnected] } # # disconnect -- # itcl::body Rappture::VtkGlyphViewer::disconnect {} { Disconnect set _reset 1 } # # Disconnect -- # # Clients use this method to disconnect from the current rendering # server. # itcl::body Rappture::VtkGlyphViewer::Disconnect {} { VisViewer::Disconnect $_dispatcher cancel !rebuild $_dispatcher cancel !resize $_dispatcher cancel !rotate $_dispatcher cancel !xcutplane $_dispatcher cancel !ycutplane $_dispatcher cancel !zcutplane $_dispatcher cancel !legend # disconnected -- no more data sitting on server set _outbuf "" array unset _datasets array unset _data array unset _colormaps array unset _seeds array unset _dataset2style array unset _obj2datasets } # ---------------------------------------------------------------------- # USAGE: ReceiveImage -bytes -type -token # # Invoked automatically whenever the "image" command comes in from # the rendering server. Indicates that binary image data with the # specified will follow. # ---------------------------------------------------------------------- itcl::body Rappture::VtkGlyphViewer::ReceiveImage { args } { array set info { -token "???" -bytes 0 -type image } array set info $args set bytes [ReceiveBytes $info(-bytes)] if { $info(-type) == "image" } { if 0 { set f [open "last.ppm" "w"] puts $f $bytes close $f } $_image(plot) configure -data $bytes set time [clock seconds] set date [clock format $time] #puts stderr "$date: received image [image width $_image(plot)]x[image height $_image(plot)] image>" if { $_start > 0 } { set finish [clock clicks -milliseconds] #puts stderr "round trip time [expr $finish -$_start] milliseconds" set _start 0 } } elseif { $info(type) == "print" } { set tag $this-print-$info(-token) set _hardcopy($tag) $bytes } EventuallyRequestLegend } # # ReceiveDataset -- # itcl::body Rappture::VtkGlyphViewer::ReceiveDataset { args } { if { ![isconnected] } { return } set option [lindex $args 0] switch -- $option { "scalar" { set option [lindex $args 1] switch -- $option { "world" { foreach { x y z value tag } [lrange $args 2 end] break } "pixel" { foreach { x y value tag } [lrange $args 2 end] break } } } "vector" { set option [lindex $args 1] switch -- $option { "world" { foreach { x y z vx vy vz tag } [lrange $args 2 end] break } "pixel" { foreach { x y vx vy vz tag } [lrange $args 2 end] break } } } "names" { foreach { name } [lindex $args 1] { #puts stderr "Dataset: $name" } } default { error "unknown dataset option \"$option\" from server" } } } # ---------------------------------------------------------------------- # USAGE: Rebuild # # Called automatically whenever something changes that affects the # data in the widget. Clears any existing data and rebuilds the # widget to display new data. # ---------------------------------------------------------------------- itcl::body Rappture::VtkGlyphViewer::Rebuild {} { set w [winfo width $itk_component(view)] set h [winfo height $itk_component(view)] if { $w < 2 || $h < 2 } { $_dispatcher event -idle !rebuild return } # Turn on buffering of commands to the server. We don't want to # be preempted by a server disconnect/reconnect (which automatically # generates a new call to Rebuild). StartBufferingCommands if { $_reset } { set _width $w set _height $h $_arcball resize $w $h DoResize # # Reset the camera and other view parameters # set q [list $_view(qw) $_view(qx) $_view(qy) $_view(qz)] $_arcball quaternion $q if {$_view(ortho)} { SendCmd "camera mode ortho" } else { SendCmd "camera mode persp" } DoRotate PanCamera set _first "" InitSettings axisXGrid axisYGrid axisZGrid axisMode \ axesVisible axisLabelsVisible foreach axis { x y z } { SendCmd "axis lformat $axis %g" } StopBufferingCommands SendCmd "imgflush" StartBufferingCommands } set _first "" SendCmd "dataset visible 0" foreach dataobj [get -objects] { if { [info exists _obj2ovride($dataobj-raise)] && $_first == "" } { set _first $dataobj } set _obj2datasets($dataobj) "" foreach comp [$dataobj components] { set tag $dataobj-$comp if { ![info exists _datasets($tag)] } { set bytes [$dataobj vtkdata $comp] if 1 { set f [open "/tmp/glyph.vtk" "w"] puts $f $bytes close $f } set length [string length $bytes] if { $_reportClientInfo } { set info {} lappend info "tool_id" [$dataobj hints toolId] lappend info "tool_name" [$dataobj hints toolName] lappend info "tool_version" [$dataobj hints toolRevision] lappend info "tool_title" [$dataobj hints toolTitle] lappend info "dataset_label" [$dataobj hints label] lappend info "dataset_size" $length lappend info "dataset_tag" $tag SendCmd "clientinfo [list $info]" } append _outbuf "dataset add $tag data follows $length\n" append _outbuf $bytes set _datasets($tag) 1 SetObjectStyle $dataobj $comp } lappend _obj2datasets($dataobj) $tag if { [info exists _obj2ovride($dataobj-raise)] } { # Setting dataset visible enables outline (if enabled) # and glyphs SendCmd "dataset visible 1 $tag" } } } if { $_first != "" } { $itk_component(field) choices delete 0 end $itk_component(fieldmenu) delete 0 end array unset _fields set _curFldName "" foreach cname [$_first components] { foreach fname [$_first fieldnames $cname] { if { [info exists _fields($fname)] } { continue } foreach { label units components } \ [$_first fieldinfo $fname] break $itk_component(field) choices insert end "$fname" "$label" $itk_component(fieldmenu) add radiobutton -label "$label" \ -value $label -variable [itcl::scope _curFldLabel] \ -selectcolor red \ -activebackground $itk_option(-plotbackground) \ -activeforeground $itk_option(-plotforeground) \ -font "Arial 8" \ -command [itcl::code $this Combo invoke] set _fields($fname) [list $label $units $components] if { $_curFldName == "" } { set _curFldName $fname set _curFldLabel $label } } } $itk_component(field) value $_curFldLabel } #InitSettings cutplaneVisible if { $_reset } { # These are settings that rely on a dataset being loaded. InitSettings \ glyphLighting \ field \ glyphEdges glyphLighting glyphOpacity \ glyphWireframe glyphOutline #cutplaneXPosition cutplaneYPosition cutplaneZPosition \ cutplaneXVisible cutplaneYVisible cutplaneZVisible \ cutplanePreinterp Zoom reset foreach axis { x y z } { # Another problem fixed by a . We looking into a data # object for the name of the axes. This should be global to # the viewer itself. set label [$_first hints ${axis}label] if { $label == "" } { set label [string toupper $axis] } # May be a space in the axis label. SendCmd [list axis name $axis $label] } if { [array size _fields] < 2 } { blt::table forget $itk_component(field) $itk_component(field_l) } set _reset 0 } # Actually write the commands to the server socket. If it fails, we don't # care. We're finished here. blt::busy hold $itk_component(hull) StopBufferingCommands; # Turn off buffering and send commands. blt::busy release $itk_component(hull) } # ---------------------------------------------------------------------- # USAGE: CurrentDatasets ?-all -visible? ?dataobjs? # # Returns a list of server IDs for the current datasets being displayed. This # is normally a single ID, but it might be a list of IDs if the current data # object has multiple components. # ---------------------------------------------------------------------- itcl::body Rappture::VtkGlyphViewer::CurrentDatasets {args} { set flag [lindex $args 0] switch -- $flag { "-all" { if { [llength $args] > 1 } { error "CurrentDatasets: can't specify dataobj after \"-all\"" } set dlist [get -objects] } "-visible" { if { [llength $args] > 1 } { set dlist {} set args [lrange $args 1 end] foreach dataobj $args { if { [info exists _obj2ovride($dataobj-raise)] } { lappend dlist $dataobj } } } else { set dlist [get -visible] } } default { set dlist $args } } set rlist "" foreach dataobj $dlist { foreach comp [$dataobj components] { set tag $dataobj-$comp if { [info exists _datasets($tag)] && $_datasets($tag) } { lappend rlist $tag } } } return $rlist } # ---------------------------------------------------------------------- # USAGE: Zoom in # USAGE: Zoom out # USAGE: Zoom reset # # Called automatically when the user clicks on one of the zoom # controls for this widget. Changes the zoom for the current view. # ---------------------------------------------------------------------- itcl::body Rappture::VtkGlyphViewer::Zoom {option} { switch -- $option { "in" { set _view(zoom) [expr {$_view(zoom)*1.25}] SendCmd "camera zoom $_view(zoom)" } "out" { set _view(zoom) [expr {$_view(zoom)*0.8}] SendCmd "camera zoom $_view(zoom)" } "reset" { array set _view { qw 0.853553 qx -0.353553 qy 0.353553 qz 0.146447 zoom 1.0 xpan 0 ypan 0 } if { $_first != "" } { set location [$_first hints camera] if { $location != "" } { array set _view $location } } set q [list $_view(qw) $_view(qx) $_view(qy) $_view(qz)] $_arcball quaternion $q DoRotate SendCmd "camera reset" } } } itcl::body Rappture::VtkGlyphViewer::PanCamera {} { set x $_view(xpan) set y $_view(ypan) SendCmd "camera pan $x $y" } # ---------------------------------------------------------------------- # USAGE: Rotate click # USAGE: Rotate drag # USAGE: Rotate release # # Called automatically when the user clicks/drags/releases in the # plot area. Moves the plot according to the user's actions. # ---------------------------------------------------------------------- itcl::body Rappture::VtkGlyphViewer::Rotate {option x y} { switch -- $option { "click" { $itk_component(view) configure -cursor fleur set _click(x) $x set _click(y) $y } "drag" { if {[array size _click] == 0} { Rotate click $x $y } else { set w [winfo width $itk_component(view)] set h [winfo height $itk_component(view)] if {$w <= 0 || $h <= 0} { return } if {[catch { # this fails sometimes for no apparent reason set dx [expr {double($x-$_click(x))/$w}] set dy [expr {double($y-$_click(y))/$h}] }]} { return } if { $dx == 0 && $dy == 0 } { return } set q [$_arcball rotate $x $y $_click(x) $_click(y)] EventuallyRotate $q set _click(x) $x set _click(y) $y } } "release" { Rotate drag $x $y $itk_component(view) configure -cursor "" catch {unset _click} } default { error "bad option \"$option\": should be click, drag, release" } } } itcl::body Rappture::VtkGlyphViewer::Pick {x y} { foreach tag [CurrentDatasets -visible] { SendCmdNoSplash "dataset getscalar pixel $x $y $tag" } } # ---------------------------------------------------------------------- # USAGE: $this Pan click x y # $this Pan drag x y # $this Pan release x y # # Called automatically when the user clicks on one of the zoom # controls for this widget. Changes the zoom for the current view. # ---------------------------------------------------------------------- itcl::body Rappture::VtkGlyphViewer::Pan {option x y} { switch -- $option { "set" { set w [winfo width $itk_component(view)] set h [winfo height $itk_component(view)] set x [expr $x / double($w)] set y [expr $y / double($h)] set _view(xpan) [expr $_view(xpan) + $x] set _view(ypan) [expr $_view(ypan) + $y] PanCamera return } "click" { set _click(x) $x set _click(y) $y $itk_component(view) configure -cursor hand1 } "drag" { if { ![info exists _click(x)] } { set _click(x) $x } if { ![info exists _click(y)] } { set _click(y) $y } set w [winfo width $itk_component(view)] set h [winfo height $itk_component(view)] set dx [expr ($_click(x) - $x)/double($w)] set dy [expr ($_click(y) - $y)/double($h)] set _click(x) $x set _click(y) $y set _view(xpan) [expr $_view(xpan) - $dx] set _view(ypan) [expr $_view(ypan) - $dy] PanCamera } "release" { Pan drag $x $y $itk_component(view) configure -cursor "" } default { error "unknown option \"$option\": should set, click, drag, or release" } } } # ---------------------------------------------------------------------- # USAGE: InitSettings ?? # # Used internally to update rendering settings whenever parameters # change in the popup settings panel. Sends the new settings off # to the back end. # ---------------------------------------------------------------------- itcl::body Rappture::VtkGlyphViewer::InitSettings { args } { foreach spec $args { if { [info exists _settings($_first-$spec)] } { # Reset global setting with dataobj specific setting set _settings($spec) $_settings($_first-$spec) } AdjustSetting $spec } } # # AdjustSetting -- # # Changes/updates a specific setting in the widget. There are # usually user-setable option. Commands are sent to the render # server. # itcl::body Rappture::VtkGlyphViewer::AdjustSetting {what {value ""}} { if { ![isconnected] } { return } switch -- $what { "background" { set bgcolor [$itk_component(background) value] array set fgcolors { "black" "white" "white" "black" "grey" "black" } configure -plotbackground $bgcolor \ -plotforeground $fgcolors($bgcolor) $itk_component(view) delete "legend" DrawLegend } "axesVisible" { set bool $_settings(axesVisible) SendCmd "axis visible all $bool" } "axisLabelsVisible" { set bool $_settings(axisLabelsVisible) SendCmd "axis labels all $bool" } "axisXGrid" - "axisYGrid" - "axisZGrid" { set axis [string tolower [string range $what 4 4]] set bool $_settings($what) SendCmd "axis grid $axis $bool" } "axisMode" { set mode [$itk_component(axisMode) value] set mode [$itk_component(axisMode) translate $mode] set _settings($what) $mode SendCmd "axis flymode $mode" } "cutplaneEdges" { set bool $_settings($what) SendCmd "cutplane edges $bool" } "cutplaneVisible" { set bool $_settings($what) SendCmd "cutplane visible $bool" } "cutplaneWireframe" { set bool $_settings($what) SendCmd "cutplane wireframe $bool" } "cutplaneLighting" { set bool $_settings($what) SendCmd "cutplane lighting $bool" } "cutplaneOpacity" { set val $_settings($what) set sval [expr { 0.01 * double($val) }] SendCmd "cutplane opacity $sval" } "cutplanePreinterp" { set bool $_settings($what) SendCmd "cutplane preinterp $bool" } "cutplaneXVisible" - "cutplaneYVisible" - "cutplaneZVisible" { set axis [string tolower [string range $what 8 8]] set bool $_settings($what) if { $bool } { $itk_component(${axis}position) configure -state normal \ -troughcolor white } else { $itk_component(${axis}position) configure -state disabled \ -troughcolor grey82 } SendCmd "cutplane axis $axis $bool" } "cutplaneXPosition" - "cutplaneYPosition" - "cutplaneZPosition" { set axis [string tolower [string range $what 8 8]] set pos [expr $_settings($what) * 0.01] SendCmd "cutplane slice ${axis} ${pos}" set _cutplanePending 0 } "colormap" { set _changed(colormap) 1 StartBufferingCommands set color [$itk_component(colormap) value] set _settings(colormap) $color if { $color == "none" } { if { $_settings(colormapVisible) } { SendCmd "glyphs colormode constant {}" set _settings(colormapVisible) 0 } } else { if { !$_settings(colormapVisible) } { SendCmd "glyphs colormode $_colorMode $_curFldName" set _settings(colormapVisible) 1 } SetCurrentColormap $color } StopBufferingCommands EventuallyRequestLegend } "glyphWireframe" { set bool $_settings(glyphWireframe) SendCmd "glyphs wireframe $bool" } "glyphVisible" { set bool $_settings(glyphVisible) SendCmd "glyphs visible $bool" if { $bool } { Rappture::Tooltip::for $itk_component(glyphs) \ "Hide the glyph" } else { Rappture::Tooltip::for $itk_component(glyphs) \ "Show the glyph" } DrawLegend } "glyphLighting" { set bool $_settings(glyphLighting) SendCmd "glyphs lighting $bool" } "glyphEdges" { set bool $_settings(glyphEdges) SendCmd "glyphs edges $bool" } "glyphOutline" { set bool $_settings(glyphOutline) SendCmd "outline visible $bool" } "glyphOpacity" { set val $_settings(glyphOpacity) set sval [expr { 0.01 * double($val) }] SendCmd "glyphs opacity $sval" } "field" { set label [$itk_component(field) value] set fname [$itk_component(field) translate $label] set _settings(field) $fname if { [info exists _fields($fname)] } { foreach { label units components } $_fields($fname) break if { $components > 1 } { set _colorMode vmag } else { set _colorMode scalar } set _curFldName $fname set _curFldLabel $label } else { puts stderr "unknown field \"$fname\"" return } #SendCmd "dataset maprange explicit $_limits($_curFldName) $_curFldName" #SendCmd "cutplane colormode $_colorMode $_curFldName" SendCmd "glyphs colormode $_colorMode $_curFldName" DrawLegend } "legendVisible" { if { !$_settings(legendVisible) } { $itk_component(view) delete legend } DrawLegend } default { error "don't know how to fix $what" } } } # # RequestLegend -- # # Request a new legend from the server. The size of the legend # is determined from the height of the canvas. # # This should be called when # 1. A new current colormap is set. # 2. Window is resized. # 3. The limits of the data have changed. (Just need a redraw). # 4. Number of glyph have changed. (Just need a redraw). # 5. Legend becomes visible (Just need a redraw). # itcl::body Rappture::VtkGlyphViewer::RequestLegend {} { set _legendPending 0 if { ![info exists _fields($_curFldName)] } { return } set fname $_curFldName set font "Arial 8" set lineht [font metrics $font -linespace] set c $itk_component(view) set w 12 set h [expr {$_height - 2 * ($lineht + 2)}] if { $h < 1} { return } if { [string match "component*" $fname] } { set title "" } else { if { [info exists _fields($fname)] } { foreach { title units } $_fields($fname) break if { $units != "" } { set title [format "%s (%s)" $title $units] } } else { set title $fname } } # If there's a title too, substract one more line if { $title != "" } { incr h -$lineht } # Set the legend on the first heightmap dataset. if { $_currentColormap != "" } { set cmap $_currentColormap SendCmdNoWait "legend $cmap $_colorMode $_curFldName {} $w $h 0" } } # ---------------------------------------------------------------------- # CONFIGURATION OPTION: -plotbackground # ---------------------------------------------------------------------- itcl::configbody Rappture::VtkGlyphViewer::plotbackground { if { [isconnected] } { set rgb [Color2RGB $itk_option(-plotbackground)] SendCmd "screen bgcolor $rgb" } } # ---------------------------------------------------------------------- # CONFIGURATION OPTION: -plotforeground # ---------------------------------------------------------------------- itcl::configbody Rappture::VtkGlyphViewer::plotforeground { if { [isconnected] } { set rgb [Color2RGB $itk_option(-plotforeground)] SendCmd "axis color all $rgb" SendCmd "outline color $rgb" #SendCmd "cutplane color $rgb" } } itcl::body Rappture::VtkGlyphViewer::limits { dataobj } { foreach { limits(xmin) limits(xmax) } [$dataobj limits x] break foreach { limits(ymin) limits(ymax) } [$dataobj limits y] break foreach { limits(zmin) limits(zmax) } [$dataobj limits z] break foreach { limits(vmin) limits(vmax) } [$dataobj limits v] break return [array get limits] } itcl::body Rappture::VtkGlyphViewer::BuildGlyphTab {} { set fg [option get $itk_component(hull) font Font] #set bfg [option get $itk_component(hull) boldFont Font] set inner [$itk_component(main) insert end \ -title "Glyph Settings" \ -icon [Rappture::icon volume-on]] $inner configure -borderwidth 4 checkbutton $inner.glyphs \ -text "Glyphs" \ -variable [itcl::scope _settings(glyphVisible)] \ -command [itcl::code $this AdjustSetting glyphVisible] \ -font "Arial 9" checkbutton $inner.wireframe \ -text "Wireframe" \ -variable [itcl::scope _settings(glyphWireframe)] \ -command [itcl::code $this AdjustSetting glyphWireframe] \ -font "Arial 9" checkbutton $inner.lighting \ -text "Enable Lighting" \ -variable [itcl::scope _settings(glyphLighting)] \ -command [itcl::code $this AdjustSetting glyphLighting] \ -font "Arial 9" checkbutton $inner.edges \ -text "Edges" \ -variable [itcl::scope _settings(glyphEdges)] \ -command [itcl::code $this AdjustSetting glyphEdges] \ -font "Arial 9" checkbutton $inner.outline \ -text "Outline" \ -variable [itcl::scope _settings(glyphOutline)] \ -command [itcl::code $this AdjustSetting glyphOutline] \ -font "Arial 9" checkbutton $inner.legend \ -text "Legend" \ -variable [itcl::scope _settings(legendVisible)] \ -command [itcl::code $this AdjustSetting legendVisible] \ -font "Arial 9" label $inner.background_l -text "Background" -font "Arial 9" itk_component add background { Rappture::Combobox $inner.background -width 10 -editable no } $inner.background choices insert end \ "black" "black" \ "white" "white" \ "grey" "grey" $itk_component(background) value $_settings(background) bind $inner.background <> [itcl::code $this AdjustSetting background] label $inner.opacity_l -text "Opacity" -font "Arial 9" ::scale $inner.opacity -from 0 -to 100 -orient horizontal \ -variable [itcl::scope _settings(glyphOpacity)] \ -width 10 \ -showvalue off \ -command [itcl::code $this AdjustSetting glyphOpacity] label $inner.scale_l -text "Scale" -font "Arial 9" ::scale $inner.scale -from 1 -to 100 -orient horizontal \ -variable [itcl::scope _settings(glyphs-scale)] \ -width 10 \ -showvalue off \ -command [itcl::code $this AdjustSetting glyphs-scale] itk_component add field_l { label $inner.field_l -text "Color By" -font "Arial 9" } { ignore -font } itk_component add field { Rappture::Combobox $inner.field -width 10 -editable no } bind $inner.field <> \ [itcl::code $this AdjustSetting field] label $inner.colormap_l -text "Colormap" -font "Arial 9" itk_component add colormap { Rappture::Combobox $inner.colormap -width 10 -editable no } $inner.colormap choices insert end \ "BCGYR" "BCGYR" \ "BGYOR" "BGYOR" \ "blue" "blue" \ "blue-to-brown" "blue-to-brown" \ "blue-to-orange" "blue-to-orange" \ "blue-to-grey" "blue-to-grey" \ "green-to-magenta" "green-to-magenta" \ "greyscale" "greyscale" \ "nanohub" "nanohub" \ "rainbow" "rainbow" \ "spectral" "spectral" \ "ROYGB" "ROYGB" \ "RYGCB" "RYGCB" \ "brown-to-blue" "brown-to-blue" \ "grey-to-blue" "grey-to-blue" \ "orange-to-blue" "orange-to-blue" $itk_component(colormap) value "BCGYR" bind $inner.colormap <> \ [itcl::code $this AdjustSetting colormap] blt::table $inner \ 0,0 $inner.field_l -anchor w -pady 2 \ 0,1 $inner.field -anchor w -pady 2 -fill x \ 1,0 $inner.colormap_l -anchor w -pady 2 \ 1,1 $inner.colormap -anchor w -pady 2 -fill x \ 3,0 $inner.background_l -anchor w -pady 2 \ 3,1 $inner.background -anchor w -pady 2 -fill x \ 5,0 $inner.wireframe -anchor w -pady 2 -cspan 2 \ 6,0 $inner.lighting -anchor w -pady 2 -cspan 2 \ 7,0 $inner.edges -anchor w -pady 2 -cspan 2 \ 8,0 $inner.outline -anchor w -pady 2 -cspan 2 \ 9,0 $inner.legend -anchor w -pady 2 \ 10,0 $inner.opacity_l -anchor w -pady 2 \ 10,1 $inner.opacity -fill x -pady 2 -fill x \ blt::table configure $inner r* c* -resize none blt::table configure $inner r11 c1 -resize expand } itcl::body Rappture::VtkGlyphViewer::BuildAxisTab {} { set fg [option get $itk_component(hull) font Font] #set bfg [option get $itk_component(hull) boldFont Font] set inner [$itk_component(main) insert end \ -title "Axis Settings" \ -icon [Rappture::icon axis2]] $inner configure -borderwidth 4 checkbutton $inner.visible \ -text "Show Axes" \ -variable [itcl::scope _settings(axesVisible)] \ -command [itcl::code $this AdjustSetting axesVisible] \ -font "Arial 9" checkbutton $inner.labels \ -text "Show Axis Labels" \ -variable [itcl::scope _settings(axisLabelsVisible)] \ -command [itcl::code $this AdjustSetting axisLabelsVisible] \ -font "Arial 9" checkbutton $inner.gridx \ -text "Show X Grid" \ -variable [itcl::scope _settings(axisXGrid)] \ -command [itcl::code $this AdjustSetting axisXGrid] \ -font "Arial 9" checkbutton $inner.gridy \ -text "Show Y Grid" \ -variable [itcl::scope _settings(axisYGrid)] \ -command [itcl::code $this AdjustSetting axisYGrid] \ -font "Arial 9" checkbutton $inner.gridz \ -text "Show Z Grid" \ -variable [itcl::scope _settings(axisZGrid)] \ -command [itcl::code $this AdjustSetting axisZGrid] \ -font "Arial 9" label $inner.mode_l -text "Mode" -font "Arial 9" itk_component add axisMode { Rappture::Combobox $inner.mode -width 10 -editable no } $inner.mode choices insert end \ "static_triad" "static" \ "closest_triad" "closest" \ "furthest_triad" "furthest" \ "outer_edges" "outer" $itk_component(axisMode) value "static" bind $inner.mode <> [itcl::code $this AdjustSetting axisMode] blt::table $inner \ 0,0 $inner.visible -anchor w -cspan 2 \ 1,0 $inner.labels -anchor w -cspan 2 \ 2,0 $inner.gridx -anchor w -cspan 2 \ 3,0 $inner.gridy -anchor w -cspan 2 \ 4,0 $inner.gridz -anchor w -cspan 2 \ 5,0 $inner.mode_l -anchor w -cspan 2 -padx { 2 0 } \ 6,0 $inner.mode -fill x -cspan 2 blt::table configure $inner r* c* -resize none blt::table configure $inner r7 c1 -resize expand } itcl::body Rappture::VtkGlyphViewer::BuildCameraTab {} { set inner [$itk_component(main) insert end \ -title "Camera Settings" \ -icon [Rappture::icon camera]] $inner configure -borderwidth 4 label $inner.view_l -text "view" -font "Arial 9" set f [frame $inner.view] foreach side { front back left right top bottom } { button $f.$side -image [Rappture::icon view$side] \ -command [itcl::code $this SetOrientation $side] Rappture::Tooltip::for $f.$side "Change the view to $side" pack $f.$side -side left } blt::table $inner \ 0,0 $inner.view_l -anchor e -pady 2 \ 0,1 $inner.view -anchor w -pady 2 set labels { qx qy qz qw xpan ypan zoom } set row 1 foreach tag $labels { label $inner.${tag}label -text $tag -font "Arial 9" entry $inner.${tag} -font "Arial 9" -bg white \ -textvariable [itcl::scope _view($tag)] bind $inner.${tag} \ [itcl::code $this camera set ${tag}] blt::table $inner \ $row,0 $inner.${tag}label -anchor e -pady 2 \ $row,1 $inner.${tag} -anchor w -pady 2 blt::table configure $inner r$row -resize none incr row } checkbutton $inner.ortho \ -text "Orthographic Projection" \ -variable [itcl::scope _view(ortho)] \ -command [itcl::code $this camera set ortho] \ -font "Arial 9" blt::table $inner \ $row,0 $inner.ortho -cspan 2 -anchor w -pady 2 blt::table configure $inner r$row -resize none incr row blt::table configure $inner c* r* -resize none blt::table configure $inner c2 -resize expand blt::table configure $inner r$row -resize expand } itcl::body Rappture::VtkGlyphViewer::BuildCutplaneTab {} { set fg [option get $itk_component(hull) font Font] set inner [$itk_component(main) insert end \ -title "Cutplane Settings" \ -icon [Rappture::icon cutbutton]] $inner configure -borderwidth 4 checkbutton $inner.visible \ -text "Cutplanes" \ -variable [itcl::scope _settings(cutplaneVisible)] \ -command [itcl::code $this AdjustSetting cutplaneVisible] \ -font "Arial 9" checkbutton $inner.wireframe \ -text "Wireframe" \ -variable [itcl::scope _settings(cutplaneWireframe)] \ -command [itcl::code $this AdjustSetting cutplaneWireframe] \ -font "Arial 9" checkbutton $inner.lighting \ -text "Enable Lighting" \ -variable [itcl::scope _settings(cutplaneLighting)] \ -command [itcl::code $this AdjustSetting cutplaneLighting] \ -font "Arial 9" checkbutton $inner.edges \ -text "Edges" \ -variable [itcl::scope _settings(cutplaneEdges)] \ -command [itcl::code $this AdjustSetting cutplaneEdges] \ -font "Arial 9" checkbutton $inner.preinterp \ -text "Interpolate Scalars" \ -variable [itcl::scope _settings(cutplanePreinterp)] \ -command [itcl::code $this AdjustSetting cutplanePreinterp] \ -font "Arial 9" label $inner.opacity_l -text "Opacity" -font "Arial 9" ::scale $inner.opacity -from 0 -to 100 -orient horizontal \ -variable [itcl::scope _settings(cutplaneOpacity)] \ -width 10 \ -showvalue off \ -command [itcl::code $this AdjustSetting cutplaneOpacity] $inner.opacity set $_settings(cutplaneOpacity) # X-value slicer... itk_component add xbutton { Rappture::PushButton $inner.xbutton \ -onimage [Rappture::icon x-cutplane-red] \ -offimage [Rappture::icon x-cutplane-red] \ -command [itcl::code $this AdjustSetting cutplaneXVisible] \ -variable [itcl::scope _settings(cutplaneXVisible)] \ } Rappture::Tooltip::for $itk_component(xbutton) \ "Toggle the X-axis cutplane on/off" $itk_component(xbutton) select itk_component add xposition { ::scale $inner.xval -from 100 -to 0 \ -width 10 -orient vertical -showvalue yes \ -borderwidth 1 -highlightthickness 0 \ -command [itcl::code $this EventuallySetCutplane x] \ -variable [itcl::scope _settings(cutplaneXPosition)] \ -foreground red2 -font "Arial 9 bold" } { usual ignore -borderwidth -highlightthickness -foreground -font -background } # Set the default cutplane value before disabling the scale. $itk_component(xposition) set 50 $itk_component(xposition) configure -state disabled Rappture::Tooltip::for $itk_component(xposition) \ "@[itcl::code $this Slice tooltip x]" # Y-value slicer... itk_component add ybutton { Rappture::PushButton $inner.ybutton \ -onimage [Rappture::icon y-cutplane-green] \ -offimage [Rappture::icon y-cutplane-green] \ -command [itcl::code $this AdjustSetting cutplaneYVisible] \ -variable [itcl::scope _settings(cutplaneYVisible)] \ } Rappture::Tooltip::for $itk_component(ybutton) \ "Toggle the Y-axis cutplane on/off" $itk_component(ybutton) select itk_component add yposition { ::scale $inner.yval -from 100 -to 0 \ -width 10 -orient vertical -showvalue yes \ -borderwidth 1 -highlightthickness 0 \ -command [itcl::code $this EventuallySetCutplane y] \ -variable [itcl::scope _settings(cutplaneYPosition)] \ -foreground green3 -font "Arial 9 bold" } { usual ignore -borderwidth -highlightthickness -foreground -font } Rappture::Tooltip::for $itk_component(yposition) \ "@[itcl::code $this Slice tooltip y]" # Set the default cutplane value before disabling the scale. $itk_component(yposition) set 50 $itk_component(yposition) configure -state disabled # Z-value slicer... itk_component add zbutton { Rappture::PushButton $inner.zbutton \ -onimage [Rappture::icon z-cutplane-blue] \ -offimage [Rappture::icon z-cutplane-blue] \ -command [itcl::code $this AdjustSetting cutplaneZVisible] \ -variable [itcl::scope _settings(cutplaneZVisible)] \ } { usual ignore -foreground } Rappture::Tooltip::for $itk_component(zbutton) \ "Toggle the Z-axis cutplane on/off" $itk_component(zbutton) select itk_component add zposition { ::scale $inner.zval -from 100 -to 0 \ -width 10 -orient vertical -showvalue yes \ -borderwidth 1 -highlightthickness 0 \ -command [itcl::code $this EventuallySetCutplane z] \ -variable [itcl::scope _settings(cutplaneZPosition)] \ -foreground blue3 -font "Arial 9 bold" } { usual ignore -borderwidth -highlightthickness -foreground -font } $itk_component(zposition) set 50 $itk_component(zposition) configure -state disabled Rappture::Tooltip::for $itk_component(zposition) \ "@[itcl::code $this Slice tooltip z]" blt::table $inner \ 0,0 $inner.visible -anchor w -pady 2 -cspan 3 \ 1,0 $inner.lighting -anchor w -pady 2 -cspan 3 \ 2,0 $inner.wireframe -anchor w -pady 2 -cspan 3 \ 3,0 $inner.edges -anchor w -pady 2 -cspan 3 \ 4,0 $inner.preinterp -anchor w -pady 2 -cspan 3 \ 5,0 $inner.opacity_l -anchor w -pady 2 -cspan 1 \ 5,1 $inner.opacity -fill x -pady 2 -cspan 3 \ 6,0 $inner.xbutton -anchor w -padx 2 -pady 2 \ 7,0 $inner.ybutton -anchor w -padx 2 -pady 2 \ 8,0 $inner.zbutton -anchor w -padx 2 -pady 2 \ 6,1 $inner.xval -fill y -rspan 4 \ 6,2 $inner.yval -fill y -rspan 4 \ 6,3 $inner.zval -fill y -rspan 4 \ blt::table configure $inner r* c* -resize none blt::table configure $inner r9 c4 -resize expand } # # camera -- # itcl::body Rappture::VtkGlyphViewer::camera {option args} { switch -- $option { "show" { puts [array get _view] } "set" { set who [lindex $args 0] set x $_view($who) set code [catch { string is double $x } result] if { $code != 0 || !$result } { return } switch -- $who { "ortho" { if {$_view(ortho)} { SendCmd "camera mode ortho" } else { SendCmd "camera mode persp" } } "xpan" - "ypan" { PanCamera } "qx" - "qy" - "qz" - "qw" { set q [list $_view(qw) $_view(qx) $_view(qy) $_view(qz)] $_arcball quaternion $q EventuallyRotate $q } "zoom" { SendCmd "camera zoom $_view(zoom)" } } } } } itcl::body Rappture::VtkGlyphViewer::GetVtkData { args } { set bytes "" foreach dataobj [get] { foreach cname [$dataobj components] { set tag $dataobj-$cname set contents [$dataobj vtkdata $cname] append bytes "$contents\n" } } return [list .vtk $bytes] } itcl::body Rappture::VtkGlyphViewer::GetImage { args } { if { [image width $_image(download)] > 0 && [image height $_image(download)] > 0 } { set bytes [$_image(download) data -format "jpeg -quality 100"] set bytes [Rappture::encoding::decode -as b64 $bytes] return [list .jpg $bytes] } return "" } itcl::body Rappture::VtkGlyphViewer::BuildDownloadPopup { popup command } { Rappture::Balloon $popup \ -title "[Rappture::filexfer::label downloadWord] as..." set inner [$popup component inner] label $inner.summary -text "" -anchor w radiobutton $inner.vtk_button -text "VTK data file" \ -variable [itcl::scope _downloadPopup(format)] \ -font "Arial 9 " \ -value vtk Rappture::Tooltip::for $inner.vtk_button "Save as VTK data file." radiobutton $inner.image_button -text "Image File" \ -variable [itcl::scope _downloadPopup(format)] \ -font "Arial 9 " \ -value image Rappture::Tooltip::for $inner.image_button \ "Save as digital image." button $inner.ok -text "Save" \ -highlightthickness 0 -pady 2 -padx 3 \ -command $command \ -compound left \ -image [Rappture::icon download] button $inner.cancel -text "Cancel" \ -highlightthickness 0 -pady 2 -padx 3 \ -command [list $popup deactivate] \ -compound left \ -image [Rappture::icon cancel] blt::table $inner \ 0,0 $inner.summary -cspan 2 \ 1,0 $inner.vtk_button -anchor w -cspan 2 -padx { 4 0 } \ 2,0 $inner.image_button -anchor w -cspan 2 -padx { 4 0 } \ 4,1 $inner.cancel -width .9i -fill y \ 4,0 $inner.ok -padx 2 -width .9i -fill y blt::table configure $inner r3 -height 4 blt::table configure $inner r4 -pady 4 raise $inner.image_button $inner.vtk_button invoke return $inner } itcl::body Rappture::VtkGlyphViewer::SetObjectStyle { dataobj comp } { # Parse style string. set tag $dataobj-$comp array set style { -color BCGYR -edges 0 -edgecolor black -linewidth 1.0 -opacity 1.0 -wireframe 0 -lighting 1 -outline 0 -levels 10 } array set style [$dataobj style $comp] if { $dataobj != $_first } { set style(-opacity) 1 } if { $_currentColormap == "" } { set stylelist [$dataobj style $comp] if { $stylelist != "" } { array set style $stylelist set stylelist [array get style] SetCurrentColormap $stylelist } $itk_component(colormap) value $style(-color) } if 0 { SendCmd "cutplane add $tag" SendCmd "cutplane edges 0 $tag" SendCmd "cutplane wireframe 0 $tag" SendCmd "cutplane lighting 1 $tag" SendCmd "cutplane linewidth 1 $tag" foreach axis { x y z } { SendCmd "cutplane slice $axis 0.5 $tag" SendCmd "cutplane axis $axis 0 $tag" } } # This is too complicated. We want to set the colormap, number of # glyph and opacity for the dataset. They can be the default values, # the style hints loaded with the dataset, or set by user controls. As # datasets get loaded, they first use the defaults that are overidden # by the style hints. If the user changes the global controls, then that # overrides everything else. I don't know what it means when global # controls are specified as style hints by each dataset. It complicates # the code to handle aberrant cases. if { $_changed(glyphOpacity) } { set style(-opacity) $_settings(glyphOpacity) } if { $_changed(colormap) } { set style(-color) $_settings(colormap) } if { $_currentColormap == "" } { $itk_component(colormap) value $style(-color) } set _currentOpacity $style(-opacity) SendCmd "glyphs add arrow $tag" SendCmd "glyphs edges $style(-edges) $tag" # normscale=1 and gscale=1 are defaults #SendCmd "glyphs normscale 1 $tag" #SendCmd "glyphs gscale 1 $tag" SendCmd "outline add $tag" SendCmd "outline color [Color2RGB $itk_option(-plotforeground)] $tag" SendCmd "outline visible $style(-outline) $tag" set _settings(glyphOutline) $style(-outline) set _settings(glyphEdges) $style(-edges) #SendCmd "glyphs color [Color2RGB $settings(-color)] $tag" SendCmd "glyphs lighting $style(-lighting) $tag" set _settings(glyphLighting) $style(-lighting) SendCmd "glyphs linecolor [Color2RGB $style(-edgecolor)] $tag" SendCmd "glyphs linewidth $style(-linewidth) $tag" SendCmd "glyphs opacity $_currentOpacity $tag" set _settings(glyphOpacity) $style(-opacity) SetCurrentColormap $style(-color) SendCmd "glyphs wireframe $style(-wireframe) $tag" set _settings(glyphWireframe) $style(-wireframe) set _settings(glyphOpacity) [expr $style(-opacity) * 100.0] } itcl::body Rappture::VtkGlyphViewer::IsValidObject { dataobj } { if {[catch {$dataobj isa Rappture::Field} valid] != 0 || !$valid} { return 0 } return 1 } # # EnterLegend -- # itcl::body Rappture::VtkGlyphViewer::EnterLegend { x y } { SetLegendTip $x $y } # # MotionLegend -- # itcl::body Rappture::VtkGlyphViewer::MotionLegend { x y } { Rappture::Tooltip::tooltip cancel set c $itk_component(view) set cw [winfo width $c] set ch [winfo height $c] if { $x >= 0 && $x < $cw && $y >= 0 && $y < $ch } { SetLegendTip $x $y } } # # LeaveLegend -- # itcl::body Rappture::VtkGlyphViewer::LeaveLegend { } { Rappture::Tooltip::tooltip cancel .rappturetooltip configure -icon "" } # # SetLegendTip -- # itcl::body Rappture::VtkGlyphViewer::SetLegendTip { x y } { set fname $_curFldName set c $itk_component(view) set w [winfo width $c] set h [winfo height $c] set font "Arial 8" set lineht [font metrics $font -linespace] set ih [image height $_image(legend)] set iy [expr $y - ($lineht + 2)] if { [string match "component*" $fname] } { set title "" } else { if { [info exists _fields($fname)] } { foreach { title units } $_fields($fname) break if { $units != "" } { set title [format "%s (%s)" $title $units] } } else { set title $fname } } # If there's a legend title, increase the offset by the line height. if { $title != "" } { incr iy -$lineht } # Make a swatch of the selected color if { [catch { $_image(legend) get 10 $iy } pixel] != 0 } { return } if { ![info exists _image(swatch)] } { set _image(swatch) [image create photo -width 24 -height 24] } set color [eval format "\#%02x%02x%02x" $pixel] $_image(swatch) put black -to 0 0 23 23 $_image(swatch) put $color -to 1 1 22 22 .rappturetooltip configure -icon $_image(swatch) # Compute the value of the point if { [info exists _limits($_curFldName)] } { foreach { vmin vmax } $_limits($_curFldName) break set t [expr 1.0 - (double($iy) / double($ih-1))] set value [expr $t * ($vmax - $vmin) + $vmin] } else { set value 0.0 } set tx [expr $x + 15] set ty [expr $y - 5] Rappture::Tooltip::text $c [format "$title %g" $value] Rappture::Tooltip::tooltip show $c +$tx,+$ty } # ---------------------------------------------------------------------- # USAGE: Slice move x|y|z # # Called automatically when the user drags the slider to move the # cut plane that slices 3D data. Gets the current value from the # slider and moves the cut plane to the appropriate point in the # data set. # ---------------------------------------------------------------------- itcl::body Rappture::VtkGlyphViewer::Slice {option args} { switch -- $option { "move" { set axis [lindex $args 0] set a [string toupper $axis] set oldval $_settings(cutplane${a}Position) set newval [lindex $args 1] if {[llength $args] != 2} { error "wrong # args: should be \"Slice move x|y|z newval\"" } set newpos [expr {0.01*$newval}] SendCmd "cutplane slice $axis $newpos" } "tooltip" { set axis [lindex $args 0] set val [$itk_component(${axis}position) get] return "Move the [string toupper $axis] cut plane.\nCurrently: $axis = $val%" } default { error "bad option \"$option\": should be axis, move, or tooltip" } } } # # ReceiveLegend -- # # Invoked automatically whenever the "legend" command comes in from # the rendering server. Indicates that binary image data with the # specified will follow. # itcl::body Rappture::VtkGlyphViewer::ReceiveLegend { colormap title min max size } { #puts stderr "ReceiveLegend colormap=$colormap title=$title range=$min,$max size=$size" set _title $title regsub {\(mag\)} $title "" _title if { [IsConnected] } { set bytes [ReceiveBytes $size] if { ![info exists _image(legend)] } { set _image(legend) [image create photo] } $_image(legend) configure -data $bytes #puts stderr "read $size bytes for [image width $_image(legend)]x[image height $_image(legend)] legend>" if { [catch {DrawLegend} errs] != 0 } { global errorInfo puts stderr "errs=$errs errorInfo=$errorInfo" } } } # # DrawLegend -- # # Draws the legend in the own canvas on the right side of the plot area. # itcl::body Rappture::VtkGlyphViewer::DrawLegend {} { set fname $_curFldName set c $itk_component(view) set w [winfo width $c] set h [winfo height $c] set font "Arial 8" set lineht [font metrics $font -linespace] if { [string match "component*" $fname] } { set title "" } else { if { [info exists _fields($fname)] } { foreach { title units } $_fields($fname) break if { $units != "" } { set title [format "%s (%s)" $title $units] } } else { set title $fname } } set x [expr $w - 2] if { !$_settings(legendVisible) } { $c delete legend return } if { [$c find withtag "legend"] == "" } { set y 2 # If there's a legend title, create a text item for the title. $c create text $x $y \ -anchor ne \ -fill $itk_option(-plotforeground) -tags "title legend" \ -font $font incr y $lineht $c create text $x $y \ -anchor ne \ -fill $itk_option(-plotforeground) -tags "vmax legend" \ -font $font incr y $lineht $c create image $x $y \ -anchor ne \ -image $_image(legend) -tags "colormap legend" $c create rectangle $x $y 1 1 \ -fill "" -outline "" -tags "sensor legend" $c create text $x [expr {$h-2}] \ -anchor se \ -fill $itk_option(-plotforeground) -tags "vmin legend" \ -font $font $c bind sensor [itcl::code $this EnterLegend %x %y] $c bind sensor [itcl::code $this LeaveLegend] $c bind sensor [itcl::code $this MotionLegend %x %y] } set x2 $x set iw [image width $_image(legend)] set ih [image height $_image(legend)] set x1 [expr $x2 - ($iw*12)/10] $c bind title [itcl::code $this Combo post] $c bind title [itcl::code $this Combo activate] $c bind title [itcl::code $this Combo deactivate] # Reset the item coordinates according the current size of the plot. $c itemconfigure title -text $title if { [info exists _limits($_curFldName)] } { foreach { vmin vmax } $_limits($_curFldName) break $c itemconfigure vmin -text [format %g $vmin] $c itemconfigure vmax -text [format %g $vmax] } set y 2 # If there's a legend title, move the title to the correct position if { $title != "" } { $c itemconfigure title -text $title $c coords title $x $y incr y $lineht $c raise title } $c coords vmax $x $y incr y $lineht $c coords colormap $x $y $c coords sensor [expr $x - $iw] $y $x [expr $y + $ih] $c raise sensor $c coords vmin $x [expr {$h - 2}] } # ---------------------------------------------------------------------- # USAGE: _dropdown post # USAGE: _dropdown unpost # USAGE: _dropdown select # # Used internally to handle the dropdown list for this combobox. The # post/unpost options are invoked when the list is posted or unposted # to manage the relief of the controlling button. The select option # is invoked whenever there is a selection from the list, to assign # the value back to the gauge. # ---------------------------------------------------------------------- itcl::body Rappture::VtkGlyphViewer::Combo {option} { set c $itk_component(view) switch -- $option { post { foreach { x1 y1 x2 y2 } [$c bbox title] break set cw [winfo width $itk_component(view)] set mw [winfo reqwidth $itk_component(fieldmenu)] set x1 [expr $cw - $mw] set x [expr $x1 + [winfo rootx $itk_component(view)]] set y [expr $y2 + [winfo rooty $itk_component(view)]] tk_popup $itk_component(fieldmenu) $x $y } activate { $c itemconfigure title -fill red } deactivate { $c itemconfigure title -fill $itk_option(-plotforeground) } invoke { $itk_component(field) value $_curFldLabel AdjustSetting field } default { error "bad option \"$option\": should be post, unpost, select" } } } # # SetCurrentColormap -- # itcl::body Rappture::VtkGlyphViewer::SetCurrentColormap { name } { # Keep track of the colormaps that we build. if { ![info exists _colormaps($name)] } { BuildColormap $name set _colormaps($name) 1 } set _currentColormap $name SendCmd "glyphs colormap $_currentColormap" } # # BuildColormap -- # # Build the designated colormap on the server. # itcl::body Rappture::VtkGlyphViewer::BuildColormap { name } { set cmap [ColorsToColormap $name] if { [llength $cmap] == 0 } { set cmap "0.0 0.0 0.0 0.0 1.0 1.0 1.0 1.0" } set wmap "0.0 1.0 1.0 1.0" SendCmd "colormap add $name { $cmap } { $wmap }" } itcl::body Rappture::VtkGlyphViewer::SetOrientation { side } { array set positions { front "1 0 0 0" back "0 0 1 0" left "0.707107 0 -0.707107 0" right "0.707107 0 0.707107 0" top "0.707107 -0.707107 0 0" bottom "0.707107 0.707107 0 0" } foreach name { qw qx qy qz } value $positions($side) { set _view($name) $value } set q [list $_view(qw) $_view(qx) $_view(qy) $_view(qz)] $_arcball quaternion $q SendCmd "camera orient $q" SendCmd "camera reset" set _view(xpan) 0 set _view(ypan) 0 set _view(zoom) 1.0 }