source: trunk/install-sh @ 829

Last change on this file since 829 was 512, checked in by dkearney, 18 years ago

made changes to the build system for the rappture package and added a few automake necessary files. also demo.bash was added to the list of files tha
t are automatically generated.

  • Property svn:executable set to *
File size: 6.3 KB
Line 
1#!/bin/sh
2#
3# install - install a program, script, or datafile
4#
5# This originates from X11R5 (mit/util/scripts/install.sh), which was
6# later released in X11R6 (xc/config/util/install.sh) with the
7# following copyright and license.
8#
9# Copyright (C) 1994 X Consortium
10#
11# Permission is hereby granted, free of charge, to any person obtaining a copy
12# of this software and associated documentation files (the "Software"), to
13# deal in the Software without restriction, including without limitation the
14# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
15# sell copies of the Software, and to permit persons to whom the Software is
16# furnished to do so, subject to the following conditions:
17#
18# The above copyright notice and this permission notice shall be included in
19# all copies or substantial portions of the Software.
20#
21# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
22# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
23# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
24# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
25# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
26# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
27#
28# Except as contained in this notice, the name of the X Consortium shall not
29# be used in advertising or otherwise to promote the sale, use or other deal-
30# ings in this Software without prior written authorization from the X Consor-
31# tium.
32#
33#
34# FSF changes to this file are in the public domain.
35#
36# Calling this script install-sh is preferred over install.sh, to prevent
37# `make' implicit rules from creating a file called install from it
38# when there is no Makefile.
39#
40# This script is compatible with the BSD install script, but was written
41# from scratch.  It can only install one file at a time, a restriction
42# shared with many OS's install programs.
43
44
45# set DOITPROG to echo to test this script
46
47# Don't use :- since 4.3BSD and earlier shells don't like it.
48doit="${DOITPROG-}"
49
50
51# put in absolute paths if you don't have them in your path; or use env. vars.
52
53mvprog="${MVPROG-mv}"
54cpprog="${CPPROG-cp}"
55chmodprog="${CHMODPROG-chmod}"
56chownprog="${CHOWNPROG-chown}"
57chgrpprog="${CHGRPPROG-chgrp}"
58stripprog="${STRIPPROG-strip}"
59rmprog="${RMPROG-rm}"
60mkdirprog="${MKDIRPROG-mkdir}"
61
62transformbasename=""
63transform_arg=""
64instcmd="$mvprog"
65chmodcmd="$chmodprog 0755"
66chowncmd=""
67chgrpcmd=""
68stripcmd=""
69rmcmd="$rmprog -f"
70mvcmd="$mvprog"
71src=""
72dst=""
73dir_arg=""
74
75while [ x"$1" != x ]; do
76    case $1 in
77        -c) instcmd="$cpprog"
78            shift
79            continue;;
80
81        -d) dir_arg=true
82            shift
83            continue;;
84
85        -m) chmodcmd="$chmodprog $2"
86            shift
87            shift
88            continue;;
89
90        -o) chowncmd="$chownprog $2"
91            shift
92            shift
93            continue;;
94
95        -g) chgrpcmd="$chgrpprog $2"
96            shift
97            shift
98            continue;;
99
100        -s) stripcmd="$stripprog"
101            shift
102            continue;;
103
104        -t=*) transformarg=`echo $1 | sed 's/-t=//'`
105            shift
106            continue;;
107
108        -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
109            shift
110            continue;;
111
112        *)  if [ x"$src" = x ]
113            then
114                src=$1
115            else
116                # this colon is to work around a 386BSD /bin/sh bug
117                :
118                dst=$1
119            fi
120            shift
121            continue;;
122    esac
123done
124
125if [ x"$src" = x ]
126then
127        echo "install:  no input file specified"
128        exit 1
129else
130        true
131fi
132
133if [ x"$dir_arg" != x ]; then
134        dst=$src
135        src=""
136       
137        if [ -d $dst ]; then
138                instcmd=:
139                chmodcmd=""
140        else
141                instcmd=mkdir
142        fi
143else
144
145# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
146# might cause directories to be created, which would be especially bad
147# if $src (and thus $dsttmp) contains '*'.
148
149        if [ -f $src -o -d $src ]
150        then
151                true
152        else
153                echo "install:  $src does not exist"
154                exit 1
155        fi
156       
157        if [ x"$dst" = x ]
158        then
159                echo "install:  no destination specified"
160                exit 1
161        else
162                true
163        fi
164
165# If destination is a directory, append the input filename; if your system
166# does not like double slashes in filenames, you may need to add some logic
167
168        if [ -d $dst ]
169        then
170                dst="$dst"/`basename $src`
171        else
172                true
173        fi
174fi
175
176## this sed command emulates the dirname command
177dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
178
179# Make sure that the destination directory exists.
180#  this part is taken from Noah Friedman's mkinstalldirs script
181
182# Skip lots of stat calls in the usual case.
183if [ ! -d "$dstdir" ]; then
184defaultIFS='   
185'
186IFS="${IFS-${defaultIFS}}"
187
188oIFS="${IFS}"
189# Some sh's can't handle IFS=/ for some reason.
190IFS='%'
191set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
192IFS="${oIFS}"
193
194pathcomp=''
195
196while [ $# -ne 0 ] ; do
197        pathcomp="${pathcomp}${1}"
198        shift
199
200        if [ ! -d "${pathcomp}" ] ;
201        then
202                $mkdirprog "${pathcomp}"
203        else
204                true
205        fi
206
207        pathcomp="${pathcomp}/"
208done
209fi
210
211if [ x"$dir_arg" != x ]
212then
213        $doit $instcmd $dst &&
214
215        if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
216        if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
217        if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
218        if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
219else
220
221# If we're going to rename the final executable, determine the name now.
222
223        if [ x"$transformarg" = x ]
224        then
225                dstfile=`basename $dst`
226        else
227                dstfile=`basename $dst $transformbasename |
228                        sed $transformarg`$transformbasename
229        fi
230
231# don't allow the sed command to completely eliminate the filename
232
233        if [ x"$dstfile" = x ]
234        then
235                dstfile=`basename $dst`
236        else
237                true
238        fi
239
240# Make a temp file name in the proper directory.
241
242        dsttmp=$dstdir/#inst.$$#
243
244# Move or copy the file name to the temp name
245
246        $doit $instcmd $src $dsttmp &&
247
248        trap "rm -f ${dsttmp}" 0 &&
249
250# and set any options; do chmod last to preserve setuid bits
251
252# If any of these fail, we abort the whole thing.  If we want to
253# ignore errors from any of these, just make sure not to ignore
254# errors from the above "$doit $instcmd $src $dsttmp" command.
255
256        if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
257        if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
258        if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
259        if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
260
261# Now rename the file to the real destination.
262
263        $doit $rmcmd -f $dstdir/$dstfile &&
264        $doit $mvcmd $dsttmp $dstdir/$dstfile
265
266fi &&
267
268
269exit 0
Note: See TracBrowser for help on using the repository browser.