source: trunk/optimizer/src/Makefile.in @ 898

Last change on this file since 898 was 898, checked in by mmc, 15 years ago

Optimization part is getting better. Fleshed out the plug-in for
PGApack, and integrated a first cut that includes the data handling.

File size: 15.6 KB
Line 
1# Makefile.in --
2#
3#       This file is a Makefile for Sample TEA Extension.  If it has the name
4#       "Makefile.in" then it is a template for a Makefile;  to generate the
5#       actual Makefile, run "./configure", which is a configuration script
6#       generated by the "autoconf" program (constructs like "@foo@" will get
7#       replaced in the actual Makefile.
8#
9# Copyright (c) 1999 Scriptics Corporation.
10# Copyright (c) 2002-2005 ActiveState Corporation.
11#
12# See the file "license.terms" for information on usage and redistribution
13# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
14#
15# RCS: @(#) $Id: Makefile.in,v 1.60 2005/09/13 22:06:37 hobbs Exp $
16
17#========================================================================
18# Add additional lines to handle any additional AC_SUBST cases that
19# have been added in a customized configure script.
20#========================================================================
21
22#SAMPLE_NEW_VAR = @SAMPLE_NEW_VAR@
23
24#========================================================================
25# Nothing of the variables below this line should need to be changed.
26# Please check the TARGETS section below to make sure the make targets
27# are correct.
28#========================================================================
29
30#========================================================================
31# The names of the source files is defined in the configure script.
32# The object files are used for linking into the final library.
33# This will be used when a dist target is added to the Makefile.
34# It is not important to specify the directory, as long as it is the
35# $(srcdir) or in the generic, win or unix subdirectory.
36#========================================================================
37
38PKG_SOURCES     = @PKG_SOURCES@
39PKG_OBJECTS     = @PKG_OBJECTS@
40
41PKG_STUB_SOURCES = @PKG_STUB_SOURCES@
42PKG_STUB_OBJECTS = @PKG_STUB_OBJECTS@
43
44#========================================================================
45# PKG_TCL_SOURCES identifies Tcl runtime files that are associated with
46# this package that need to be installed, if any.
47#========================================================================
48
49PKG_TCL_SOURCES = @PKG_TCL_SOURCES@
50
51#========================================================================
52# This is a list of public header files to be installed, if any.
53#========================================================================
54
55PKG_HEADERS     = @PKG_HEADERS@
56
57#========================================================================
58# "PKG_LIB_FILE" refers to the library (dynamic or static as per
59# configuration options) composed of the named objects.
60#========================================================================
61
62PKG_LIB_FILE    = @PKG_LIB_FILE@
63PKG_STUB_LIB_FILE = @PKG_STUB_LIB_FILE@
64
65lib_BINARIES    = $(PKG_LIB_FILE)
66BINARIES        = $(lib_BINARIES)
67
68SHELL           = @SHELL@
69
70srcdir          = @srcdir@
71prefix          = @prefix@
72exec_prefix     = @exec_prefix@
73
74bindir          = @bindir@
75libdir          = @libdir@
76datadir         = @datadir@
77mandir          = @mandir@
78includedir      = @includedir@
79
80DESTDIR         =
81
82PKG_DIR         = $(PACKAGE_NAME)$(PACKAGE_VERSION)
83pkgdatadir      = $(datadir)/$(PKG_DIR)
84pkglibdir       = $(libdir)/$(PKG_DIR)
85pkgincludedir   = $(includedir)/$(PKG_DIR)
86
87top_builddir    = .
88
89INSTALL         = @INSTALL@
90INSTALL_PROGRAM = @INSTALL_PROGRAM@
91INSTALL_DATA    = @INSTALL_DATA@
92INSTALL_SCRIPT  = @INSTALL_SCRIPT@
93
94PACKAGE_NAME    = @PACKAGE_NAME@
95PACKAGE_VERSION = @PACKAGE_VERSION@
96CC              = @CC@
97CXX             = @CXX@
98CFLAGS_DEFAULT  = @CFLAGS_DEFAULT@
99CFLAGS_WARNING  = @CFLAGS_WARNING@
100CLEANFILES      = @CLEANFILES@
101EXEEXT          = @EXEEXT@
102LDFLAGS_DEFAULT = @LDFLAGS_DEFAULT@
103MAKE_LIB        = @MAKE_LIB@
104MAKE_SHARED_LIB = @MAKE_SHARED_LIB@
105MAKE_STATIC_LIB = @MAKE_STATIC_LIB@
106MAKE_STUB_LIB   = @MAKE_STUB_LIB@
107OBJEXT          = @OBJEXT@
108RANLIB          = @RANLIB@
109RANLIB_STUB     = @RANLIB_STUB@
110SHLIB_CFLAGS    = @SHLIB_CFLAGS@
111SHLIB_LD        = @SHLIB_LD@
112SHLIB_LD_LIBS   = @SHLIB_LD_LIBS@
113STLIB_LD        = @STLIB_LD@
114#TCL_DEFS       = @TCL_DEFS@
115TCL_BIN_DIR     = @TCL_BIN_DIR@
116TCL_SRC_DIR     = @TCL_SRC_DIR@
117#TK_BIN_DIR     = @TK_BIN_DIR@
118#TK_SRC_DIR     = @TK_SRC_DIR@
119
120# Not used, but retained for reference of what libs Tcl required
121#TCL_LIBS       = @TCL_LIBS@
122
123#========================================================================
124# TCLLIBPATH seeds the auto_path in Tcl's init.tcl so we can test our
125# package without installing.  The other environment variables allow us
126# to test against an uninstalled Tcl.  Add special env vars that you
127# require for testing here (like TCLX_LIBRARY).
128#========================================================================
129
130EXTRA_PATH      = $(top_builddir):$(TCL_BIN_DIR)
131#EXTRA_PATH     = $(top_builddir):$(TCL_BIN_DIR):$(TK_BIN_DIR)
132TCLLIBPATH      = $(top_builddir)
133TCLSH_ENV       = TCL_LIBRARY=`@CYGPATH@ $(TCL_SRC_DIR)/library` \
134                  @LD_LIBRARY_PATH_VAR@="$(EXTRA_PATH):$(@LD_LIBRARY_PATH_VAR@)" \
135                  PATH="$(EXTRA_PATH):$(PATH)" \
136                  TCLLIBPATH="$(TCLLIBPATH)"
137#                 TK_LIBRARY=`@CYGPATH@ $(TK_SRC_DIR)/library`
138
139TCLSH_PROG      = @TCLSH_PROG@
140TCLSH   = $(TCLSH_ENV) $(TCLSH_PROG)
141
142#WISH_PROG      = @WISH_PROG@
143#WISH   = $(TCLSH_ENV) $(WISH_PROG)
144
145
146SHARED_BUILD    = @SHARED_BUILD@
147
148INCLUDES        = @PKG_INCLUDES@ @TCL_INCLUDES@
149#INCLUDES       = @PKG_INCLUDES@ @TCL_INCLUDES@ @TK_INCLUDES@ @TK_XINCLUDES@
150
151PKG_CFLAGS      = @PKG_CFLAGS@
152
153# TCL_DEFS is not strictly need here, but if you remove it, then you
154# must make sure that configure.in checks for the necessary components
155# that your library may use.  TCL_DEFS can actually be a problem if
156# you do not compile with a similar machine setup as the Tcl core was
157# compiled with.
158#DEFS           = $(TCL_DEFS) @DEFS@ $(PKG_CFLAGS)
159DEFS            = @DEFS@ $(PKG_CFLAGS)
160
161CONFIG_CLEAN_FILES = Makefile
162
163CPPFLAGS        = @CPPFLAGS@
164LIBS            = @PKG_LIBS@ @LIBS@
165AR              = @AR@
166CFLAGS          = @CFLAGS@
167COMPILE         = $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
168
169#========================================================================
170# Start of user-definable TARGETS section
171#========================================================================
172
173#========================================================================
174# TEA TARGETS.  Please note that the "libraries:" target refers to platform
175# independent files, and the "binaries:" target inclues executable programs and
176# platform-dependent libraries.  Modify these targets so that they install
177# the various pieces of your package.  The make and install rules
178# for the BINARIES that you specified above have already been done.
179#========================================================================
180
181all: binaries libraries doc
182
183#========================================================================
184# The binaries target builds executable programs, Windows .dll's, unix
185# shared/static libraries, and any other platform-dependent files.
186# The list of targets to build for "binaries:" is specified at the top
187# of the Makefile, in the "BINARIES" variable.
188#========================================================================
189
190binaries: $(BINARIES)
191
192libraries:
193
194
195#========================================================================
196# Your doc target should differentiate from doc builds (by the developer)
197# and doc installs (see install-doc), which just install the docs on the
198# end user machine when building from source.
199#========================================================================
200
201doc:
202#       @echo "If you have documentation to create, place the commands to"
203#       @echo "build the docs in the 'doc:' target.  For example:"
204#       @echo "        xml2nroff sample.xml > sample.n"
205#       @echo "        xml2html sample.xml > sample.html"
206
207install: all install-binaries install-libraries install-doc
208
209install-binaries: binaries install-lib-binaries install-bin-binaries
210
211#========================================================================
212# This rule installs platform-independent files, such as header files.
213# The list=...; for p in $$list handles the empty list case x-platform.
214#========================================================================
215
216install-libraries: libraries
217        @mkdir -p $(DESTDIR)$(includedir)
218        @echo "Installing header files in $(DESTDIR)$(includedir)"
219        @list='$(PKG_HEADERS)'; for i in $$list; do \
220            echo "Installing $(srcdir)/$$i" ; \
221            $(INSTALL_DATA) $(srcdir)/$$i $(DESTDIR)$(includedir) ; \
222        done;
223
224#========================================================================
225# Install documentation.  Unix manpages should go in the $(mandir)
226# directory.
227#========================================================================
228
229install-doc: doc
230#       @mkdir -p $(DESTDIR)$(mandir)/mann
231#       @echo "Installing documentation in $(DESTDIR)$(mandir)"
232#       @list='$(srcdir)/doc/*.n'; for i in $$list; do \
233#           echo "Installing $$i"; \
234#           rm -f $(DESTDIR)$(mandir)/mann/`basename $$i`; \
235#           $(INSTALL_DATA) $$i $(DESTDIR)$(mandir)/mann ; \
236#       done
237
238test: binaries libraries
239        $(TCLSH) `@CYGPATH@ $(srcdir)/tests/all.tcl` $(TESTFLAGS)
240
241shell: binaries libraries
242        @$(TCLSH) $(SCRIPT)
243
244gdb:
245        $(TCLSH_ENV) gdb $(TCLSH_PROG) $(SCRIPT)
246
247depend:
248
249#========================================================================
250# $(PKG_LIB_FILE) should be listed as part of the BINARIES variable
251# mentioned above.  That will ensure that this target is built when you
252# run "make binaries".
253#
254# The $(PKG_OBJECTS) objects are created and linked into the final
255# library.  In most cases these object files will correspond to the
256# source files above.
257#========================================================================
258
259$(PKG_LIB_FILE): $(PKG_OBJECTS)
260        -rm -f $(PKG_LIB_FILE)
261        ${MAKE_LIB}
262        $(RANLIB) $(PKG_LIB_FILE)
263
264$(PKG_STUB_LIB_FILE): $(PKG_STUB_OBJECTS)
265        -rm -f $(PKG_STUB_LIB_FILE)
266        ${MAKE_STUB_LIB}
267        $(RANLIB_STUB) $(PKG_STUB_LIB_FILE)
268
269#========================================================================
270# We need to enumerate the list of .c to .o lines here.
271#
272# In the following lines, $(srcdir) refers to the toplevel directory
273# containing your extension.  If your sources are in a subdirectory,
274# you will have to modify the paths to reflect this:
275#
276# sample.$(OBJEXT): $(srcdir)/generic/sample.c
277#       $(COMPILE) -c `@CYGPATH@ $(srcdir)/generic/sample.c` -o $@
278#
279# Setting the VPATH variable to a list of paths will cause the makefile
280# to look into these paths when resolving .c to .obj dependencies.
281# As necessary, add $(srcdir):$(srcdir)/compat:....
282#========================================================================
283
284VPATH = $(srcdir):$(srcdir)/src:$(srcdir)/unix:$(srcdir)/win
285
286.c.@OBJEXT@:
287        $(CC) $(COMPILE) -c `@CYGPATH@ $<` -o $@
288.cc.@OBJEXT@:
289        $(CXX) $(COMPILE) -c `@CYGPATH@ $<` -o $@
290.cpp.@OBJEXT@:
291        $(CXX) $(COMPILE) -c `@CYGPATH@ $<` -o $@
292
293#========================================================================
294# Distribution creation
295# You may need to tweak this target to make it work correctly.
296#========================================================================
297
298#COMPRESS       = tar cvf $(PKG_DIR).tar $(PKG_DIR); compress $(PKG_DIR).tar
299COMPRESS        = gtar zcvf $(PKG_DIR).tar.gz $(PKG_DIR)
300DIST_ROOT       = /tmp/dist
301DIST_DIR        = $(DIST_ROOT)/$(PKG_DIR)
302
303dist-clean:
304        rm -rf $(DIST_DIR) $(DIST_ROOT)/$(PKG_DIR).tar.*
305
306dist: dist-clean
307        mkdir -p $(DIST_DIR)
308        cp -p $(srcdir)/ChangeLog $(srcdir)/README* $(srcdir)/license* \
309                $(srcdir)/aclocal.m4 $(srcdir)/configure $(srcdir)/*.in \
310                $(DIST_DIR)/
311        chmod 664 $(DIST_DIR)/Makefile.in $(DIST_DIR)/aclocal.m4
312        chmod 775 $(DIST_DIR)/configure $(DIST_DIR)/configure.in
313
314        for i in $(srcdir)/*.[ch]; do \
315            if [ -f $$i ]; then \
316                cp -p $$i $(DIST_DIR)/ ; \
317            fi; \
318        done;
319
320        mkdir $(DIST_DIR)/tclconfig
321        cp $(srcdir)/tclconfig/install-sh $(srcdir)/tclconfig/tcl.m4 \
322                $(DIST_DIR)/tclconfig/
323        chmod 664 $(DIST_DIR)/tclconfig/tcl.m4
324        chmod +x $(DIST_DIR)/tclconfig/install-sh
325
326        list='demos doc generic library mac tests unix win'; \
327        for p in $$list; do \
328            if test -d $(srcdir)/$$p ; then \
329                mkdir $(DIST_DIR)/$$p; \
330                cp -p $(srcdir)/$$p/*.* $(DIST_DIR)/$$p/; \
331            fi; \
332        done
333
334        (cd $(DIST_ROOT); $(COMPRESS);)
335
336#========================================================================
337# End of user-definable section
338#========================================================================
339
340#========================================================================
341# Don't modify the file to clean here.  Instead, set the "CLEANFILES"
342# variable in configure.in
343#========================================================================
344
345clean: 
346        -test -z "$(BINARIES)" || rm -f $(BINARIES)
347        -rm -f *.$(OBJEXT) core *.core
348        -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
349
350distclean: clean
351        -rm -f *.tab.c
352        -rm -f $(CONFIG_CLEAN_FILES)
353        -rm -f config.cache config.log config.status
354
355#========================================================================
356# Install binary object libraries.  On Windows this includes both .dll and
357# .lib files.  Because the .lib files are not explicitly listed anywhere,
358# we need to deduce their existence from the .dll file of the same name.
359# Library files go into the lib directory.
360# In addition, this will generate the pkgIndex.tcl
361# file in the install location (assuming it can find a usable tclsh shell)
362#
363# You should not have to modify this target.
364#========================================================================
365
366install-lib-binaries: binaries
367        @mkdir -p $(DESTDIR)$(pkglibdir)
368        @list='$(lib_BINARIES)'; for p in $$list; do \
369          if test -f $$p; then \
370            echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(pkglibdir)/$$p"; \
371            $(INSTALL_PROGRAM) $$p $(DESTDIR)$(pkglibdir)/$$p; \
372            stub=`echo $$p|sed -e "s/.*\(stub\).*/\1/"`; \
373            if test "x$$stub" = "xstub"; then \
374                echo " $(RANLIB_STUB) $(DESTDIR)$(pkglibdir)/$$p"; \
375                $(RANLIB_STUB) $(DESTDIR)$(pkglibdir)/$$p; \
376            else \
377                echo " $(RANLIB) $(DESTDIR)$(pkglibdir)/$$p"; \
378                $(RANLIB) $(DESTDIR)$(pkglibdir)/$$p; \
379            fi; \
380            ext=`echo $$p|sed -e "s/.*\.//"`; \
381            if test "x$$ext" = "xdll"; then \
382                lib=`basename $$p|sed -e 's/.[^.]*$$//'`.lib; \
383                if test -f $$lib; then \
384                    echo " $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib"; \
385                    $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib; \
386                fi; \
387            fi; \
388          fi; \
389        done
390        @mkdir -p $(DESTDIR)$(pkglibdir)/scripts
391        @list='$(PKG_TCL_SOURCES)'; for p in $$list; do \
392          if test -f $(srcdir)/$$p; then \
393            destp=`basename $$p`; \
394            echo " Install $$destp $(DESTDIR)$(pkglibdir)/scripts/$$destp"; \
395            $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(pkglibdir)/scripts/$$destp; \
396          fi; \
397        done
398        @if test "x$(SHARED_BUILD)" = "x1"; then \
399            echo " Install pkgIndex.tcl $(DESTDIR)$(pkglibdir)"; \
400            $(INSTALL_DATA) pkgIndex.tcl $(DESTDIR)$(pkglibdir); \
401        fi
402
403#========================================================================
404# Install binary executables (e.g. .exe files and dependent .dll files)
405# This is for files that must go in the bin directory (located next to
406# wish and tclsh), like dependent .dll files on Windows.
407#
408# You should not have to modify this target, except to define bin_BINARIES
409# above if necessary.
410#========================================================================
411
412install-bin-binaries: binaries
413        @mkdir -p $(DESTDIR)$(bindir)
414        @list='$(bin_BINARIES)'; for p in $$list; do \
415          if test -f $$p; then \
416            echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p"; \
417            $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p; \
418          fi; \
419        done
420
421.SUFFIXES: .c .$(OBJEXT)
422
423Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
424        cd $(top_builddir) \
425          && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
426
427uninstall-binaries:
428        list='$(lib_BINARIES)'; for p in $$list; do \
429          rm -f $(DESTDIR)$(pkglibdir)/$$p; \
430        done
431        list='$(PKG_TCL_SOURCES)'; for p in $$list; do \
432          p=`basename $$p`; \
433          rm -f $(DESTDIR)$(pkglibdir)/$$p; \
434        done
435        list='$(bin_BINARIES)'; for p in $$list; do \
436          rm -f $(DESTDIR)$(bindir)/$$p; \
437        done
438
439.PHONY: all binaries clean depend distclean doc install libraries test
440
441# Tell versions [3.59,3.63) of GNU make to not export all variables.
442# Otherwise a system limit (for SysV at least) may be exceeded.
443.NOEXPORT:
Note: See TracBrowser for help on using the repository browser.