Ignore:
Timestamp:
Jun 8, 2008 6:24:34 PM (13 years ago)
Author:
gah
Message:

Massive changes: New directory/file layout

Location:
trunk/lang
Files:
1 added
1 edited
1 moved

Legend:

Unmodified
Added
Removed
  • trunk/lang/tcl/Makefile.in

    r951 r1018  
    1 # Makefile.in --
    2 #
    3 #       This file is a Makefile for Sample TEA Extension.  If it has the name
    4 #       "Makefile.in" then it is a template for a Makefile;  to generate the
    5 #       actual Makefile, run "./configure", which is a configuration script
    6 #       generated by the "autoconf" program (constructs like "@foo@" will get
    7 #       replaced in the actual Makefile.
    8 #
    9 # Copyright (c) 1999 Scriptics Corporation.
    10 # Copyright (c) 2002-2005 ActiveState Corporation.
    11 #
    12 # See the file "license.terms" for information on usage and redistribution
    13 # of this file, and for a DISCLAIMER OF ALL WARRANTIES.
    14 #
    15 # RCS: @(#) $Id: Makefile.in,v 1.60 2005/09/13 22:06:37 hobbs Exp $
    161
    17 #========================================================================
    18 # Add additional lines to handle any additional AC_SUBST cases that
    19 # have been added in a customized configure script.
    20 #========================================================================
    21 
    22 #SAMPLE_NEW_VAR = @SAMPLE_NEW_VAR@
    23 BLT_SRC_DIR = @BLT_SRC_DIR@
    24 ALT_DIR = @ALT_DIR@
    25 RAPPTURE_DIR = @RAPPTURE_DIR@
    26 
    27 
    28 #========================================================================
    29 # Nothing of the variables below this line should need to be changed.
    30 # Please check the TARGETS section below to make sure the make targets
    31 # are correct.
    32 #========================================================================
    33 
    34 #========================================================================
    35 # The names of the source files is defined in the configure script.
    36 # The object files are used for linking into the final library.
    37 # This will be used when a dist target is added to the Makefile.
    38 # It is not important to specify the directory, as long as it is the
    39 # $(srcdir) or in the generic, win or unix subdirectory.
    40 #========================================================================
    41 
    42 PKG_SOURCES     = @PKG_SOURCES@
    43 PKG_OBJECTS     = @PKG_OBJECTS@
    44 
    45 PKG_STUB_SOURCES = @PKG_STUB_SOURCES@
    46 PKG_STUB_OBJECTS = @PKG_STUB_OBJECTS@
    47 
    48 #========================================================================
    49 # PKG_TCL_SOURCES identifies Tcl runtime files that are associated with
    50 # this package that need to be installed, if any.
    51 #========================================================================
    52 
    53 PKG_TCL_SOURCES = @PKG_TCL_SOURCES@
    54 
    55 #========================================================================
    56 # This is a list of public header files to be installed, if any.
    57 #========================================================================
    58 
    59 PKG_HEADERS     = @PKG_HEADERS@
    60 
    61 #========================================================================
    62 # "PKG_LIB_FILE" refers to the library (dynamic or static as per
    63 # configuration options) composed of the named objects.
    64 #========================================================================
    65 
    66 PKG_LIB_FILE    = @PKG_LIB_FILE@
    67 PKG_STUB_LIB_FILE = @PKG_STUB_LIB_FILE@
    68 
    69 lib_BINARIES    = $(PKG_LIB_FILE)
    70 BINARIES        = $(lib_BINARIES)
    71 
    72 SHELL           = @SHELL@
    73 
    74 srcdir          = @srcdir@
    75 prefix          = @prefix@
    76 exec_prefix     = @exec_prefix@
    77 
    78 bindir          = @bindir@
    79 libdir          = @libdir@
     2bindir          = @bindir@
    803datadir         = @datadir@
    814datarootdir     = @datarootdir@
    82 mandir          = @mandir@
    83 includedir      = @includedir@
     5exec_prefix     = @exec_prefix@
     6includedir      = @includedir@
     7libdir          = @libdir@
     8mandir          = @mandir@
     9prefix          = @prefix@
    8410
    85 DESTDIR         =
     11destdir         = $(libdir)/Rappture$(PACKAGE_VERSION)
    8612
    87 PKG_DIR         = $(PACKAGE_NAME)$(PACKAGE_VERSION)
    88 pkgdatadir      = $(datadir)/$(PKG_DIR)
    89 pkglibdir       = $(libdir)/$(PKG_DIR)
    90 pkgincludedir   = $(includedir)/$(PKG_DIR)
    91 
    92 top_builddir    = .
     13PACKAGE_VERSION = @PACKAGE_VERSION@
    9314
    9415INSTALL         = @INSTALL@
    95 INSTALL_PROGRAM = @INSTALL_PROGRAM@
    96 INSTALL_DATA    = @INSTALL_DATA@
    97 INSTALL_SCRIPT  = @INSTALL_SCRIPT@
    9816
    99 PACKAGE_NAME    = @PACKAGE_NAME@
    100 PACKAGE_VERSION = @PACKAGE_VERSION@
    101 CC              = @CC@
    102 CXX             = @CXX@
    103 CFLAGS_DEFAULT  = @CFLAGS_DEFAULT@
    104 CFLAGS_WARNING  = @CFLAGS_WARNING@
    105 CLEANFILES      = @CLEANFILES@
    106 EXEEXT          = @EXEEXT@
    107 LDFLAGS_DEFAULT = @LDFLAGS_DEFAULT@
    108 MAKE_LIB        = @MAKE_LIB@
    109 MAKE_SHARED_LIB = @MAKE_SHARED_LIB@
    110 MAKE_STATIC_LIB = @MAKE_STATIC_LIB@
    111 MAKE_STUB_LIB   = @MAKE_STUB_LIB@
    112 OBJEXT          = @OBJEXT@
    113 RANLIB          = @RANLIB@
    114 RANLIB_STUB     = @RANLIB_STUB@
    115 SHLIB_CFLAGS    = @SHLIB_CFLAGS@
    116 SHLIB_LD        = @SHLIB_LD@
    117 SHLIB_LD_LIBS   = @SHLIB_LD_LIBS@
    118 STLIB_LD        = @STLIB_LD@
    119 #TCL_DEFS       = @TCL_DEFS@
    120 TCL_BIN_DIR     = @TCL_BIN_DIR@
    121 TCL_SRC_DIR     = @TCL_SRC_DIR@
    122 #TK_BIN_DIR     = @TK_BIN_DIR@
    123 #TK_SRC_DIR     = @TK_SRC_DIR@
     17CXX             = @CXX@
     18CC              = @CC@
     19CFLAGS_DEBUG    = @CFLAGS_DEBUG@
     20CFLAGS_OPTIMIZE = @CFLAGS_OPTIMIZE@
     21STLIB_LD        = @STLIB_LD@
     22SHLIB_LD        = @SHLIB_LD@
     23SHLIB_CFLAGS    = @SHLIB_CFLAGS@
     24SHLIB_LDFLAGS   = @SHLIB_LDFLAGS@
     25SHLIB_SUFFIX    = @SHLIB_SUFFIX@
     26CFLAGS_DEFAULT  = @CFLAGS_DEFAULT@
     27LIB_SEARCH_DIRS = @LIB_SEARCH_DIRS@
     28CFLAGS          = @CFLAGS@
    12429
    125 # Not used, but retained for reference of what libs Tcl required
    126 #TCL_LIBS       = @TCL_LIBS@
     30RANLIB          = @RANLIB@
     31AR              = ar
     32RM              = rm -f
    12733
    128 #========================================================================
    129 # TCLLIBPATH seeds the auto_path in Tcl's init.tcl so we can test our
    130 # package without installing.  The other environment variables allow us
    131 # to test against an uninstalled Tcl.  Add special env vars that you
    132 # require for testing here (like TCLX_LIBRARY).
    133 #========================================================================
     34# The script directory is moved from src/tcl.
    13435
    135 EXTRA_PATH      = $(top_builddir):$(TCL_BIN_DIR)
    136 #EXTRA_PATH     = $(top_builddir):$(TCL_BIN_DIR):$(TK_BIN_DIR)
    137 TCLLIBPATH      = $(top_builddir)
    138 TCLSH_ENV       = TCL_LIBRARY=`@CYGPATH@ $(TCL_SRC_DIR)/library` \
    139                   @LD_LIBRARY_PATH_VAR@="$(EXTRA_PATH):$(@LD_LIBRARY_PATH_VAR@)" \
    140                   PATH="$(EXTRA_PATH):$(PATH)" \
    141                   TCLLIBPATH="$(TCLLIBPATH)"
    142 #                 TK_LIBRARY=`@CYGPATH@ $(TK_SRC_DIR)/library`
     36.PHONY: src scripts tests
    14337
    144 TCLSH_PROG      = @TCLSH_PROG@
    145 TCLSH   = $(TCLSH_ENV) $(TCLSH_PROG)
     38all:
     39        $(MAKE) -C src all
     40        $(MAKE) -C scripts all
    14641
    147 #WISH_PROG      = @WISH_PROG@
    148 #WISH   = $(TCLSH_ENV) $(WISH_PROG)
     42install:
     43        $(INSTALL) -d $(destdir)
     44        $(INSTALL) -m 0444 pkgIndex.tcl $(destdir)
     45        $(MAKE) -C src install
     46        $(MAKE) -C scripts install
    14947
     48test:   
     49        $(MAKE) -C tests all
    15050
    151 SHARED_BUILD    = @SHARED_BUILD@
    152 
    153 INCLUDES        = @PKG_INCLUDES@ @TCL_INCLUDES@ -I$(BLT_SRC_DIR) -I$(ALT_DIR)/include -I$(RAPPTURE_DIR)/include
    154 #INCLUDES       = @PKG_INCLUDES@ @TCL_INCLUDES@ @TK_INCLUDES@ @TK_XINCLUDES@
    155 
    156 PKG_CFLAGS      = @PKG_CFLAGS@
    157 
    158 # TCL_DEFS is not strictly need here, but if you remove it, then you
    159 # must make sure that configure.in checks for the necessary components
    160 # that your library may use.  TCL_DEFS can actually be a problem if
    161 # you do not compile with a similar machine setup as the Tcl core was
    162 # compiled with.
    163 #DEFS           = $(TCL_DEFS) @DEFS@ $(PKG_CFLAGS)
    164 DEFS            = @DEFS@ $(PKG_CFLAGS)
    165 
    166 CONFIG_CLEAN_FILES = Makefile
    167 
    168 CPPFLAGS        = @CPPFLAGS@
    169 LIBS            = @PKG_LIBS@ @LIBS@
    170 AR              = @AR@
    171 CFLAGS          = @CFLAGS@
    172 COMPILE         = $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
    173 
    174 #========================================================================
    175 # Start of user-definable TARGETS section
    176 #========================================================================
    177 
    178 #========================================================================
    179 # TEA TARGETS.  Please note that the "libraries:" target refers to platform
    180 # independent files, and the "binaries:" target inclues executable programs and
    181 # platform-dependent libraries.  Modify these targets so that they install
    182 # the various pieces of your package.  The make and install rules
    183 # for the BINARIES that you specified above have already been done.
    184 #========================================================================
    185 
    186 all: binaries libraries doc
    187 
    188 #========================================================================
    189 # The binaries target builds executable programs, Windows .dll's, unix
    190 # shared/static libraries, and any other platform-dependent files.
    191 # The list of targets to build for "binaries:" is specified at the top
    192 # of the Makefile, in the "BINARIES" variable.
    193 #========================================================================
    194 
    195 binaries: $(BINARIES)
    196 
    197 libraries:
    198 
    199 
    200 #========================================================================
    201 # Your doc target should differentiate from doc builds (by the developer)
    202 # and doc installs (see install-doc), which just install the docs on the
    203 # end user machine when building from source.
    204 #========================================================================
    205 
    206 doc:
    207 #       @echo "If you have documentation to create, place the commands to"
    208 #       @echo "build the docs in the 'doc:' target.  For example:"
    209 #       @echo "        xml2nroff sample.xml > sample.n"
    210 #       @echo "        xml2html sample.xml > sample.html"
    211 
    212 install: all install-binaries install-libraries install-doc
    213 
    214 install-binaries: binaries install-lib-binaries install-bin-binaries
    215 
    216 #========================================================================
    217 # This rule installs platform-independent files, such as header files.
    218 # The list=...; for p in $$list handles the empty list case x-platform.
    219 #========================================================================
    220 
    221 install-libraries: libraries
    222         @mkdir -p $(DESTDIR)$(includedir)
    223         @echo "Installing header files in $(DESTDIR)$(includedir)"
    224         @list='$(PKG_HEADERS)'; for i in $$list; do \
    225             echo "Installing $(srcdir)/$$i" ; \
    226             $(INSTALL_DATA) $(srcdir)/$$i $(DESTDIR)$(includedir) ; \
    227         done;
    228 
    229 #========================================================================
    230 # Install documentation.  Unix manpages should go in the $(mandir)
    231 # directory.
    232 #========================================================================
    233 
    234 install-doc: doc
    235 #       @mkdir -p $(DESTDIR)$(mandir)/mann
    236 #       @echo "Installing documentation in $(DESTDIR)$(mandir)"
    237 #       @list='$(srcdir)/doc/*.n'; for i in $$list; do \
    238 #           echo "Installing $$i"; \
    239 #           rm -f $(DESTDIR)$(mandir)/mann/`basename $$i`; \
    240 #           $(INSTALL_DATA) $$i $(DESTDIR)$(mandir)/mann ; \
    241 #       done
    242 
    243 test: binaries libraries
    244         $(TCLSH) `@CYGPATH@ $(srcdir)/tests/all.tcl` $(TESTFLAGS)
    245 
    246 shell: binaries libraries
    247         @$(TCLSH) $(SCRIPT)
    248 
    249 gdb:
    250         $(TCLSH_ENV) gdb $(TCLSH_PROG) $(SCRIPT)
    251 
    252 depend:
    253 
    254 #========================================================================
    255 # $(PKG_LIB_FILE) should be listed as part of the BINARIES variable
    256 # mentioned above.  That will ensure that this target is built when you
    257 # run "make binaries".
    258 #
    259 # The $(PKG_OBJECTS) objects are created and linked into the final
    260 # library.  In most cases these object files will correspond to the
    261 # source files above.
    262 #========================================================================
    263 
    264 $(PKG_LIB_FILE): $(PKG_OBJECTS)
    265         -rm -f $(PKG_LIB_FILE)
    266         ${MAKE_LIB}
    267         $(RANLIB) $(PKG_LIB_FILE)
    268 
    269 $(PKG_STUB_LIB_FILE): $(PKG_STUB_OBJECTS)
    270         -rm -f $(PKG_STUB_LIB_FILE)
    271         ${MAKE_STUB_LIB}
    272         $(RANLIB_STUB) $(PKG_STUB_LIB_FILE)
    273 
    274 #========================================================================
    275 # We need to enumerate the list of .c to .o lines here.
    276 #
    277 # In the following lines, $(srcdir) refers to the toplevel directory
    278 # containing your extension.  If your sources are in a subdirectory,
    279 # you will have to modify the paths to reflect this:
    280 #
    281 # sample.$(OBJEXT): $(srcdir)/generic/sample.c
    282 #       $(COMPILE) -c `@CYGPATH@ $(srcdir)/generic/sample.c` -o $@
    283 #
    284 # Setting the VPATH variable to a list of paths will cause the makefile
    285 # to look into these paths when resolving .c to .obj dependencies.
    286 # As necessary, add $(srcdir):$(srcdir)/compat:....
    287 #========================================================================
    288 
    289 VPATH = $(srcdir):$(srcdir)/src:$(srcdir)/unix:$(srcdir)/win
    290 
    291 .c.@OBJEXT@:
    292         $(CC) $(COMPILE) -c `@CYGPATH@ $<` -o $@
    293 .cc.@OBJEXT@:
    294         $(CXX) $(COMPILE) -c `@CYGPATH@ $<` -o $@
    295 .cpp.@OBJEXT@:
    296         $(CXX) $(COMPILE) -c `@CYGPATH@ $<` -o $@
    297 
    298 #========================================================================
    299 # Distribution creation
    300 # You may need to tweak this target to make it work correctly.
    301 #========================================================================
    302 
    303 #COMPRESS       = tar cvf $(PKG_DIR).tar $(PKG_DIR); compress $(PKG_DIR).tar
    304 COMPRESS        = gtar zcvf $(PKG_DIR).tar.gz $(PKG_DIR)
    305 DIST_ROOT       = /tmp/dist
    306 DIST_DIR        = $(DIST_ROOT)/$(PKG_DIR)
    307 
    308 dist-clean:
    309         rm -rf $(DIST_DIR) $(DIST_ROOT)/$(PKG_DIR).tar.*
    310 
    311 dist: dist-clean
    312         mkdir -p $(DIST_DIR)
    313         cp -p $(srcdir)/ChangeLog $(srcdir)/README* $(srcdir)/license* \
    314                 $(srcdir)/aclocal.m4 $(srcdir)/configure $(srcdir)/*.in \
    315                 $(DIST_DIR)/
    316         chmod 664 $(DIST_DIR)/Makefile.in $(DIST_DIR)/aclocal.m4
    317         chmod 775 $(DIST_DIR)/configure $(DIST_DIR)/configure.in
    318 
    319         for i in $(srcdir)/*.[ch]; do \
    320             if [ -f $$i ]; then \
    321                 cp -p $$i $(DIST_DIR)/ ; \
    322             fi; \
    323         done;
    324 
    325         mkdir $(DIST_DIR)/tclconfig
    326         cp $(srcdir)/tclconfig/install-sh $(srcdir)/tclconfig/tcl.m4 \
    327                 $(DIST_DIR)/tclconfig/
    328         chmod 664 $(DIST_DIR)/tclconfig/tcl.m4
    329         chmod +x $(DIST_DIR)/tclconfig/install-sh
    330 
    331         list='demos doc generic library mac tests unix win'; \
    332         for p in $$list; do \
    333             if test -d $(srcdir)/$$p ; then \
    334                 mkdir $(DIST_DIR)/$$p; \
    335                 cp -p $(srcdir)/$$p/*.* $(DIST_DIR)/$$p/; \
    336             fi; \
    337         done
    338 
    339         (cd $(DIST_ROOT); $(COMPRESS);)
    340 
    341 #========================================================================
    342 # End of user-definable section
    343 #========================================================================
    344 
    345 #========================================================================
    346 # Don't modify the file to clean here.  Instead, set the "CLEANFILES"
    347 # variable in configure.in
    348 #========================================================================
    349 
    350 clean: 
    351         -test -z "$(BINARIES)" || rm -f $(BINARIES)
    352         -rm -f *.$(OBJEXT) core *.core
    353         -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
     51clean:
     52        $(MAKE) -C src clean
     53        $(MAKE) -C tests clean
     54        $(MAKE) -C scripts clean
    35455
    35556distclean: clean
    356         -rm -f *.tab.c
    357         -rm -f $(CONFIG_CLEAN_FILES)
    358         -rm -f config.cache config.log config.status
     57        $(MAKE) -C src distclean
     58        $(MAKE) -C tests distclean
     59        $(MAKE) -C scripts distclean
     60        $(RM) Makefile
    35961
    360 #========================================================================
    361 # Install binary object libraries.  On Windows this includes both .dll and
    362 # .lib files.  Because the .lib files are not explicitly listed anywhere,
    363 # we need to deduce their existence from the .dll file of the same name.
    364 # Library files go into the lib directory.
    365 # In addition, this will generate the pkgIndex.tcl
    366 # file in the install location (assuming it can find a usable tclsh shell)
    367 #
    368 # You should not have to modify this target.
    369 #========================================================================
    370 
    371 install-lib-binaries: binaries
    372         @mkdir -p $(DESTDIR)$(pkglibdir)
    373         @list='$(lib_BINARIES)'; for p in $$list; do \
    374           if test -f $$p; then \
    375             echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(pkglibdir)/$$p"; \
    376             $(INSTALL_PROGRAM) $$p $(DESTDIR)$(pkglibdir)/$$p; \
    377             stub=`echo $$p|sed -e "s/.*\(stub\).*/\1/"`; \
    378             if test "x$$stub" = "xstub"; then \
    379                 echo " $(RANLIB_STUB) $(DESTDIR)$(pkglibdir)/$$p"; \
    380                 $(RANLIB_STUB) $(DESTDIR)$(pkglibdir)/$$p; \
    381             else \
    382                 echo " $(RANLIB) $(DESTDIR)$(pkglibdir)/$$p"; \
    383                 $(RANLIB) $(DESTDIR)$(pkglibdir)/$$p; \
    384             fi; \
    385             ext=`echo $$p|sed -e "s/.*\.//"`; \
    386             if test "x$$ext" = "xdll"; then \
    387                 lib=`basename $$p|sed -e 's/.[^.]*$$//'`.lib; \
    388                 if test -f $$lib; then \
    389                     echo " $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib"; \
    390                     $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib; \
    391                 fi; \
    392             fi; \
    393           fi; \
    394         done
    395         @mkdir -p $(DESTDIR)$(pkglibdir)/scripts
    396         @list='$(PKG_TCL_SOURCES)'; for p in $$list; do \
    397           if test -f $(srcdir)/$$p; then \
    398             destp=`basename $$p`; \
    399             echo " Install $$destp $(DESTDIR)$(pkglibdir)/scripts/$$destp"; \
    400             $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(pkglibdir)/scripts/$$destp; \
    401           fi; \
    402         done
    403         # Uncomment when you are ready to install tcl rappture library bindings
    404         #$(TCLSH_PROG) $(srcdir)/tclconfig/mkindex.tcl $(DESTDIR)$(pkglibdir)/scripts
    405         $(INSTALL_DATA) init.tcl $(DESTDIR)$(pkglibdir)/init.tcl
    406         @list='$(PKG_TCL_SOURCES)'; for p in $$list; do \
    407           if test -f $(srcdir)/$$p; then \
    408             destp=`basename $$p`; \
    409             echo " Install $$destp $(DESTDIR)$(pkglibdir)/$$destp"; \
    410             $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(pkglibdir)/$$destp; \
    411           fi; \
    412         done
    413         @if test "x$(SHARED_BUILD)" = "x1"; then \
    414             echo " Install pkgIndex.tcl $(DESTDIR)$(pkglibdir)"; \
    415             $(INSTALL_DATA) pkgIndex.tcl $(DESTDIR)$(pkglibdir); \
    416         fi
    417 
    418 #========================================================================
    419 # Install binary executables (e.g. .exe files and dependent .dll files)
    420 # This is for files that must go in the bin directory (located next to
    421 # wish and tclsh), like dependent .dll files on Windows.
    422 #
    423 # You should not have to modify this target, except to define bin_BINARIES
    424 # above if necessary.
    425 #========================================================================
    426 
    427 install-bin-binaries: binaries
    428         @mkdir -p $(DESTDIR)$(bindir)
    429         @list='$(bin_BINARIES)'; for p in $$list; do \
    430           if test -f $$p; then \
    431             echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p"; \
    432             $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p; \
    433           fi; \
    434         done
    435 
    436 .SUFFIXES: .c .$(OBJEXT)
    437 
    438 Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
    439         cd $(top_builddir) \
    440           && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
    441 
    442 uninstall-binaries:
    443         list='$(lib_BINARIES)'; for p in $$list; do \
    444           rm -f $(DESTDIR)$(pkglibdir)/$$p; \
    445         done
    446         list='$(PKG_TCL_SOURCES)'; for p in $$list; do \
    447           p=`basename $$p`; \
    448           rm -f $(DESTDIR)$(pkglibdir)/$$p; \
    449         done
    450         list='$(bin_BINARIES)'; for p in $$list; do \
    451           rm -f $(DESTDIR)$(bindir)/$$p; \
    452         done
    453 
    454 .PHONY: all binaries clean depend distclean doc install libraries test
    455 
    456 # Tell versions [3.59,3.63) of GNU make to not export all variables.
    457 # Otherwise a system limit (for SysV at least) may be exceeded.
    458 .NOEXPORT:
Note: See TracChangeset for help on using the changeset viewer.