This tool version is unpublished and cannot be run. If you would like to have this version staged, you can put a request through HUB Support.
Silicon nanowire transistors are promising device structures for future integrated circuits. Short channel effects are becoming more and more important in the nanoscale regime, and therefore effective gate control will be necessary to achieve good device performance.
Devices based on silicon nanowires can be manufactured with multigate and gate-all-around transistors and you can explore them with this tool.
In contrast to planar MOSFETs which have uniform charge and potential profiles in the transverse direction (i.e., normal to both the gate and the source-drain direction), a silicon nanowire transistor has a genuinely 3D distribution of electron density and electrostatic
potential. Therefore self-consistent 3D simulations are mandatory, and you run them with this tool. One of the transport models assumes ballistic transport, which gives the upper performance limit of the devices. The effective-mass mode space approach (either coupled or uncoupled) produces high computational efficiency that makes this
simulator practical for extensive device simulation and
design. Scattering is treated by so-called BÃ¼ttiker probes, which was previously used in metal-oxide-semiconductor field effect transistor simulations. The effects of scattering on both internal device
characteristics and terminal currents can be examined, which enables our simulator to be used for the exploration of realistic performance limits of silicon-nanowire transistors.
The mode space approach treats quantum confinement and transport separately. The simulations you can perform consist of the following steps:
- Solve the 3D Poisson equation for the electrostatic potential.
- Solve the 2D SchrÃ¶dinger equation with closed boundary conditions for each cross section (or slice) of the nanowire transistor to obtain the electron subbands (along the nanowire) and eigenfunctions.
- Solve the coupled or uncoupled nonequilibrium Green function (NEGF) transport equations for the electron charge density.
- Go to step (1) to calculate the electrostatic potential. If the self-consistent loop has converged, calculate the electron current using the NEGF approach and show the results.
In summary you can use three transport models:
- Uncoupled mode space with averaging of the potential on the slices. This is the fastest option.
- Uncoupled mode space with scattering by BÃ¼ttiker probes and no averaging of the potential. This option takes much more time.
- Coupled mode space without scattering and without averaging of the potential. Due to the coupling of the modes, this option is also much slower than the first one. But no worries; you can start the simulation and login back later to check the results.