You must login before you can run this tool.
Quantum Dot Lab
Compute the eigenstates of a particle in a box of various shapes including domes, pyramids and multilayer structures.
Version 3.0.8  published on 26 May 2016
doi:10.4231/D3W950P7J cite this
This tool is closed source.
Category
Published on
Abstract
Quantum dots can be produced in a variety of material systems and geometries. This educational tool simulates particle in a box problem for a variety of geometries such as boxes, cylinders, pyramids, and ellipsoids and multilayer structures composed of substrate, wetting layer, quantum dot and capping layer. Users can choose between simple single band effective mass model, two band effective mass model and 10 band sp3d5s* tight binding model (with spinorbit coupling) and run interactively. 3D visualization depicts the 3D confined wave functions. Optical transitions are computed and sorted into dark and light lines. Absorption curves are computed for different polarizations and orientations. Parameters such as incident light angle and polarization, Fermi level, or temperature can be scanned to analyze the effect of 3D geometries on isotropic optical properties. The simulation is fully parallelized and depending on the device structure, the tool decides the computational resource to be used for the simulation. This tool is supported by variety of different materials:
 A First time user guide
 A general tutorial entitled "Quantum Dots" on the origin of quantum mechanics and the interpretation of quantum dots as artificial atoms.
 An introductory tutorial to the tool "Introduction to Quantum Dot Lab" with usage scenarios on state filling, light/dark absorption lines, and absorption coefficients.
 A homework / project assignment entitled "Homework Exercise on Quantum Dot Spectra, Absorption, and State Symmetry".
A topic page is available with homeworks/tests/reallife problems.
Upgrades from previous versions:
 Ver 1.1: Now users can select an effective mass of the quantum dot. Also the tool speed was a bit improved and there is a status bar indicating progress in the visualization preparation – which had been slow.
 Ver 1.1.1: The optical absorption lines are not as finely resolved and therefore do not demand such large file sizes. The default absorption line width was also increased by a factor of 10. Finally the number of allowed states was increased to 150.
 Ver 1.1.4: Added default values for effective mass for the different materials listed.
 Ver 2.0: The tool now runs NEMO 5 instead of NEMO 3D. This fixes a problem connected to the absolute position of energy levels. A 1s tightbinding band structure model is used which is equivalent to an effectivemass model. The optical matrix elements and absorption peaks are calculated slightly differently compared to the old tool. The GUI has been rearranged, allowing for the effective mass parameters to be set by the user. The tab for optical calculations has also been cleaned up. The performance of NEMO 5 is still undergoing optimizations.
 Ver 2.0.1/2: 4 digits of floating point is used in energy states plot. Fixed error when the different number of states is used. Several detailed description of input parameters is updated.
 Ver 2.1: Update to NEMO 5 r4228.
 Ver 3.0: Update to NEMO 5 r17881. The tool can now simulate both particle in a box problem and multilayer structures composed of substrate, wetting layer and a capping layer. Also, the users can now choose between a single band effective mass model, 2 band effective mass model and 10 band sp3d5s* tight binding simulation. The tool can submit jobs to clusters for large simulations.
 Ver 3.1: Update to NEMO 5 r19861. Added feature to simulate strain and local bandstructure.
Powered by
Quantum Dot Lab version 1.x ran NEMO3D. Starting from version 2.0, the underlying engine is NEMO 5, a code under development in the research group of Gerhard Klimeck. NEMO 5 is an open source nanoelectronics device simulator containing a variety of different material and geometry models. Features include the construction of atomistic grids of varying crystal structures, multiband SchroedingerPoisson simulations, and userfriendly input/output.
Credits
Prasad Sarangapani: Development of Quantum Dot Lab 3.0.
Jim Fonseca: Student supervision
Daniel F Mejia:Visualization of electron wavefunctions.
Andrew Roche:Rappture interface, simulation timing
Woody Gilberton:Rappture interface
Tarek Ameen:Local bandstructure
Hesam Ilatikhameneh: Strain
James Charles:Lanczos eigenfunctions
Lars Bjaalie: Integration of NEMO 5 with Quantum Dot Lab.
Matteo Mannino, David Ebert, Michael McLennan: Initial version of Quantum Dot Lab (<2.0).
Sebastian Steiger, Michael Povolotskyi, Tillmann Kubis, HongHyun Park: NEMO 5 core development team.
Gerhard Klimeck: General supervision.
Cite this work
Researchers should cite this work as follows:

 "Building and Deploying Community Nanotechnology Software Tools on nanoHUB.org and Atomistic simulations of multimillionatom quantum dot nanostructures", Gerhard Klimeck, Marek Korkusinski, Haiying Xu, Seungwon Lee, Sebastien Goasguen and Faisal Saied, Proceedings of the 5th IEEE Conference on Nanotechnology, 2: pg. 807, 07 (2005)

Prasad Sarangapani; James Fonseca; Daniel F Mejia; James Charles; Woody Gilbertson; Tarek Ahmed Ameen; Hesameddin Ilatikhameneh; Andrew Roché; Lars Bjaalie; Sebastian Steiger; David Ebert; Matteo Mannino; HongHyun Park; Tillmann Christoph Kubis; Michael Povolotskyi; Michael McLennan; Gerhard Klimeck (2016), "Quantum Dot Lab," https://nanohub.org/resources/qdot. (DOI: 10.4231/D3W950P7J).