Tags: junior level

All Categories (1-13 of 13)

  1. Chemical Vapor Deposition Reactor Design

    28 May 2019 | | Contributor(s):: Adam Powell

    Sketch the streamlines in a tube CVD reactor and propose a design change which would lead to more uniform deposition.

  2. Continuous Casting Hydrostatics

    28 May 2019 | | Contributor(s):: Matthew John M. Krane

    A mixture of hydrostatics and the modified Bernoulli equation are used to determine the effect of fluid height in a tundish on the flow rate supplying liquid steel to a continuous casting mold.

  3. Crystal-free Zone in a Glass-Ceramic Dish

    28 May 2019 | | Contributor(s):: Adam Powell

    Estimate the thickness of the crystal-free surface layer in a glass-ceramic dish by relating a heat equation solution to the T-T-T diagram.

  4. Flow Through a Catalytic Reactor

    16 May 2019 | | Contributor(s):: Adam Powell

    Use porous flow theory to describe pressure-flow rate and plug/mixing behavior of flow through a packed bed of catalyst spheres.

  5. Dimensional Analysis: Catalytic Combustion of Carbon Monoxide

    16 May 2019 | | Contributor(s):: Adam Powell

    Use dimensional analysis to understand how parameters and material properties determine uniformity of reactant gas concentration across porous spheres coated with catalysts.

  6. Freezing by Radiation and Convection

    16 May 2019 | | Contributor(s):: Adam Powell

    Use radiation and a heat transfer coefficient to estimate the initial rate of solidification of the solid shell at the top of a casting while the temperature in the shell can be considered uniform, then set up the equation for mixed conduction/convection-radiation limited cooling.

  7. Heat Conduction and Diffusion in Alloy Casting

    16 May 2019 | | Contributor(s):: Adam Powell

    Derive temperature and liquid concentration profiles during die casting of a roughly plate-shaped alloy part.

  8. Electron Beam Centrifugal Atomization of Metal

    16 May 2019 | | Contributor(s):: Adam Powell

    Use a heat balance to calculate electron beam power required to continuously heat and melt metal as it is atomized, including heat losses from the top surface due to evaporation and radiation.

  9. Bottom Filled Mold

    07 Apr 2019 | | Contributor(s):: Matthew John M. Krane

    Calculation of mold filling times, with and without a constant height of metal in a riser. Problem uses modified Bernoulli equation for the mechanical energy balance and the students are asked to determine which resistances are significant.

  10. Batch and Continuous Flow Reactors

    30 Mar 2019 | | Contributor(s):: Adam Powell

    Derive expressions for productivity of plug flow and perfectly mixed continuous flow reactors, discuss quality, and describe advantages of batch reactors.

  11. Blood Filtration

    30 Mar 2019 |

    Estimate flow rate of blood through two types of porous filter: an array of tubes and a packed bed of solid spheres.

  12. Blood Flow and Vascular Deposits

    30 Mar 2019 |

    Analyze the effect of increasing fat deposit thickness on blood flow through human arteries.

  13. Casting of a Cylindrical Part in a Thermally Resistive Mold

    30 Mar 2019 | | Contributor(s):: Matthew John M. Krane

    Use of integral analysis for development of approximate solution for solidification in cylindrical thermally resistive mold.