Changes between Version 2 and Version 3 of ProphetPadreee


Ignore:
Timestamp:
01/27/08 16:56:34 (6 years ago)
Author:
kim568
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • ProphetPadreee

    v2 v3  
    22   * It is easy to see that the IV curve resulting from PADRE with poly and metal gate and PROPHET with metal gate is fairly near to the experimental result but the PROPHET result with poly gate is deviated when the voltage goes to zero which means its threshold voltage is larger(in positive) than others.  
    33   * The first reason for this is PROPHET doesn't have poly-contact specification so that I have attached the polysilicon layer on purpose and because there is much carrier-penetration from contact region. The current at zero-voltage is even very large compared to others. I think I should solve this problem at any rate because there should be consistency in all results. 
    4    * And the current from the simulation result at large minus voltage where the inversion occurs is a little bit higher than experimental result. This is still not known to me. 
     4   * And the current from the simulation result at large minus voltage is a little bit higher than experimental result. This is still not known to me. 
    55   * The current value at zero voltage is very similar when we look into PADRE result and experment result.