# Support

## Support Options

• ### Knowledge Base

Find information on common issues.

• ### Wish List

Suggest a new site feature or improvement.

• ### Support Tickets

Check on status of your tickets.

## PhotonicsRT: Wave Propagation in Multilayer Structures

1. NICT 2. Purdue University

The tool calculates the reflection, transmission and absorption of light passing through a lamellar structure with uniform isotropic layers.

You must login before you can run this tool.

Version 1.2.4 - published on 07 Sep 2012

doi:10.4231/D3BG2H902 cite this

This tool is closed source.

#### Abstract

PhotonicsRT: Wave Propagation in Multilayer Structures calculates the electromagnetic field for a plane wave incident at an arbitrary incident angle on a multilayer material stack using the T-matrix approach. The outputs of the tool are real and imaginary part of reflection coefficient (r), real and imaginary part of transmission coefficient (t), reflectance (R), transmittance (T) and absorption (A).

r = Er ⁄ Ei

t = Et ⁄ Ei

where Ei is the incident electric field amplitude, Er is the reflected electric field amplitude and Et is the transmitted electric field amplitude. (Note that the same definitions are used for both TE mode and TM mode.)

The values of R, T and A are calculated by the following equations,

R = |r|2

T = |t|2 × nsub ⁄ nsup

A = 1 - R - T

where nsup is the refractive index of the substrate and nsup is the refractive index of the superstrate.

User defines the following parameters:

• Polarization of incident waves
• Incident angle of the waves
• Wavelength range
• Material at the front (source) side
• Multilayer structure (material and thickness for each layer)
• Material at the back (shade) side

The material parameters used in this tool are permittivity and permeability. For permittivity, the same interpolation method and sources are used as PhotonicsDB: Optical Constants.

For permeability, all the values are fixed to unity.

Related tools:

PhotonicsSHA-2D: Modeling of Single-Period Multilayer Optical Gratings and Metamaterials Hyperlens Design Solver Hyperlens Layer Designer PhotonicsDB: Optical Constants

#### Credits

Development

• S. Ishii ... Developed and tested the tool (user interface and integrated simulation engine)
• U. Chettiar and A. Kildishev ... Developed the core simulation engine
• M. Thoreson and X. Ni ... Developed the tutorial and performed overall testing
• A. Kildishev ... Led the development effort

Support

• D. Kearney and G. Klimeck ... Provided Rappture and nanoHUB.org support
• U. Chettiar ... Performed the initial prototyping

#### References

Electromagnetic Theory, J. A. Stratton, McGraw-Hill Book Company (1941).

Principles of Optics - Electromagnetic theory of propagation, interference and diffraction of light, M. Born and E. Wolf, Cambridge University Press (2001).

Negative refractive index in optics of metal-dielectric composites, A.V. Kildishev, W. Cai, U. K. Chettiar, H-K. Yuan, A.K. Sarychev, V.P. Drachev, and V.M. Shalaev, J. Opt. Soc. Am. B, Vol.23, No.3 423-433 (2006).

Handbook of Optical Constants of Solids, Edward D. Palik (Ed.), Academic Press (1997).

Optical Constants of the Noble Metals, P. B. Johnson and R. W. Christy, Physical Review B Vol.6 n.12 (1972).

#### Cite this work

Researchers should cite this work as follows:

• Satoshi Ishii; Uday K. Chettiar; Xingjie Ni; Alexander V. Kildishev (2012), "PhotonicsRT: Wave Propagation in Multilayer Structures," https://nanohub.org/resources/photonicsrt. (DOI: 10.4231/D3BG2H902).

### Legal

nanoHUB.org, a resource for nanoscience and nanotechnology, is supported by the National Science Foundation and other funding agencies. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the National Science Foundation.