Support Options

Submit a Support Ticket


What's New: Past Month


Resources feed

  1. IMA 2013 UQ: Uncertainty Quantification in Materials Modeling

    02 Apr 2014 | Workshops

    This IMA Hot Topics Workshop will bring together materials scientists specializing in modeling and simulation with researchers in uncertainty quantification (UQ) with the goal of identifying the main …

  2. IMA 2013 UQ: Probabilistic Hazard Mapping and Uncertainty Quantification Based on Granular Flow Simulations

    02 Apr 2014 | Online Presentations | Contributor(s): Elaine Spiller

    PDE models of granular flows are invaluable tools for developing probabilistic hazards maps for volcanic landslides, but they are far from perfect. Epistemic uncertainty -- uncertainty due to a lack …

  3. ME 517 Lecture 15: Electrostatics III

    01 Apr 2014 | Online Presentations

  4. IMA 2013 UQ: Prediction Interval Construction for Smart Material Systems in the Presence of Model Discrepancy

    01 Apr 2014 | Online Presentations | Contributor(s): Ralph Smith

    In this presentation, we will discuss issues pertaining to the construction of prediction intervals in the presence of model biases or discrepancies. We will illustrate this in the context of models …

  5. ME 517 Lecture 14: Electrostatics II

    26 Mar 2014 | Online Presentations | Contributor(s): Steve Wereley

  6. Engineered Defects in Wide Band-gap Semiconductors for Single-spin Sensing and Computation

    26 Mar 2014 | Online Presentations | Contributor(s): Abram Falk

    Using infrared light at near-telecom wavelengths, I will show that spin states in silicon carbide exhibit long quantum coherence times that persist up to room temperature. I will also discuss new …

  7. Interface Structure/Surface Morphology of (Co,Fe,Ni)/Cu/Si Thin Films

    25 Mar 2014 | Presentation Materials | Contributor(s): Brian Demczyk, R. Naik, A. Lukaszew, G. W. Auner, V. M. Naik

    The effects of thin film and interfacial stress on the magnetic properties Fe, Co and Ni films deposited by molecular beam epitaxy on Cu underlayers (Si substrate) were examined, employing …

  8. NEEDS UC Berkeley Workshop

    25 Mar 2014 | Workshops | Contributor(s): Jaijeet Roychowdhury, Mark Lundstrom

    This workshop presented a tutorial introduction to the Matlab-based compact model development platform being developed at UC Berkeley.

  9. DAEAPI Wrapper

    25 Mar 2014 | Online Presentations | Contributor(s): Bichen Wu

    DAEAPI is a general format for describing circuit equations in MATLAB. These are differential-algebraic equation systems (DAEs) that are used, for example, by Berkeley MDE (Model Development …

  10. ModSpec and the MVS Model

    25 Mar 2014 | Online Presentations | Contributor(s): Tianshi Wang

    A case study of the use of ModSpec with the MVS nano transistor model is presented. The case study illustrates the use of ModSpec to test and debug compact models.

  11. A Quick Circuit Simulation Primer

    25 Mar 2014 | Online Presentations | Contributor(s): Aadithya V Karthik

    Those who write compact models for use in circuit simulation need a basic understanding of what goes on inside a circuit simulator. This presentation is a short introduction for beginners. It briefly …

  12. ModSpec/MDE Tutorial

    25 Mar 2014 | Online Presentations | Contributor(s): Tianshi Wang

    The Berkeley Model Specification language (ModSpec) and Model Development Environment (MDE) is a Matlab-based platform for developing simulation-ready compact models. A tutorial introduction to …

  13. Xyce: An Open Source SPICE Engine

    25 Mar 2014 | Online Presentations | Contributor(s): Eric Keiter

    This presentation is an overview of Xyce, an open source, SPICE-compatible, high-performance analog circuit simulator, capable of solving extremely large circuit problems by supporting large-scale …

  14. Birck Nanotechnology Center Safety Tip of the Week

    25 Mar 2014 | Presentation Materials | Contributor(s): NSAC (Policies and Procedures Committee)

    These are tips of the week that are related to safety at Birck Nanotechnology Center

  15. Evolution of Microstructure and Magnetic Properties in CoCr Thin Films

    25 Mar 2014 | Presentation Materials | Contributor(s): Brian Demczyk, J. O. Artman

    This presentation describes the structural and magnetic properties, including domain structures, in magnetron-sputtered Co-25% Cr thin films.

  16. nanoHUB-U Introduction to the Materials Science of Rechargeable Batteries : Scientific Overview

    25 Mar 2014 | Online Presentations | Contributor(s): R. Edwin Garcí­a

    A five-week course distilling the essentials of the materials science of rechargeable batteries.

  17. Local Anodic Oxidation

    25 Mar 2014 | Animations | Contributor(s): Sitaram R Natekar

    Video describing a typical Local Anodic Oxidation process and some data trends showing how certain parameters influence oxide height on a specimen of Gallium Arsenide

  18. Green's Function for Heat Conduction in a Hollow Cylinder R55 with Type 5 Boundary Conditions

    25 Mar 2014 | Publications | Contributor(s): Donald E. Amos

    Abstract The Green's function is the principal tool in construction of the general solution to the classical heat conduction problem. The solution is presented in terms of the internal heat …

  19. LASERS: Basic Principles and Applications

    25 Mar 2014 | Teaching Materials | Contributor(s): Alessia Polemi

    This is a lecture prepared within the course Electronic Materials (Junior level). It provides an explanation of the lasers basic principles and an overview of possible applications

  20. Using nanoHUB to Introduce Middle School Students to Models and Simulations

    25 Mar 2014 | Teaching Materials | Contributor(s): Tanya Faltens

    This is a combination hands-on and simulation activity that will teach middle school students about the function and importance of modeling and simulations in science and engineering while learning …, a resource for nanoscience and nanotechnology, is supported by the National Science Foundation and other funding agencies. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the National Science Foundation.