You must login before you can run this tool.
KP Nanowire/UTB FET
Simulate Nanowire/UTB FETs Using KP method
Version 1.0.3 - published on 21 Aug 2014
doi:10.4231/D34J09Z3M cite this
This tool is closed source.
Category
Published on
Abstract
This tool simulates Si PMOS nanowire FETs based on the k.p method. Ballistic transport is assumed.
This tool performs "full quantum" transport calculations, meaning that full 3D Schrodinger equations with open boundary conditions (formulated in the NEGF framework) are solved to obtain the hole density and current. The 3D Poisson equation is iteratively solved together with the transport equations to yield the self-consistent potential. The NEGF transport equations are solved via the mode-space transformation developed by the author (see the reference paper).
The k.p Hamiltonian can be either 6x6 or 3x3, depending on whether the spin-orbit (SO) is turned on or off, respectively. Turning on SO usually makes little difference, while it considerably slows down the simulation (usually 4~5 times slower). Users can specify k.p parameters, although it is recommended to use the default parameters.
Together with the nanowireMG tool which was developed by the same author, one can simulate both NMOS and PMOS nanowire FETs. The two tools will be eventually merged into one tool. In a near future, this tool will be extended to simulate ultra-thin-body (UTB) structures, III-V MOSFETs (8x8 KP method will be used for these; Band-to-Band tunneling effect will be considered), and devices with Schottky barrier contacts.
Publications
"Full-quantum simulation of hole transport and band-to-band tunneling in nanowires using the k·p method", Mincheol Shin, JOURNAL OF APPLIED PHYSICS 106, 054505 (2009).
Cite this work
Researchers should cite this work as follows:
- "Full-quantum simulation of hole transport and band-to-band tunneling in nanowires using the k·p method", Mincheol Shin, JOURNAL OF APPLIED PHYSICS 106, 054505 (2009).