You must login before you can run this tool.
SUGARCube - Cantilever
Cantilever modeling and simulation with different loads
Version 1.0.2 - published on 20 Aug 2014
doi:10.4231/D3Z02Z93N cite this
This tool is closed source.
Category
Published on
Abstract
The simulator is currently designed to simulate cantilever beams. A cantilever beam is a beam that is anchored at one end while the tip of the beam is allowed to hang freely. The tool is designed to simulate how the cantilever beam will act under various forces and moments. There are two different simulations can be done by the tool: static analysis and (up to two parameters) sweep analysis. In the static analysis, up to four sets of three dimensional (3-D) loads (forces and moments) can be applied on the cantilever at user defined positions.
The final output of the tool is graphic representation of the beam that shows deflection of the beam in user defined view angle as well as the numerical value of the deflection at interested point in table format.
The netlist file which is used in SUGAR simulation is available to be downloaded in the end for user’s future development.
Credits
This tool is based on the work of Fengyuan Li, and Brandon Patterson.
Cite this work
Researchers should cite this work as follows: