Today's maintenance is complete. close

Support

Support Options

Submit a Support Ticket

 

Spice3f4

By Michael McLennan

Purdue University

General-purpose circuit simulation program for nonlinear dc, nonlinear transient, and linear ac analysis

Launch Tool

You must login before you can run this tool.

Version 1.2 - published on 10 Sep 2010

doi:10.4231/D3028PC9D cite this

This tool is closed source.

View All Supporting Documents

Category

Tools

Published on

Abstract

demo

SPICE is a general-purpose circuit simulation program for nonlinear dc, nonlinear transient, and linear ac analysis. It was developed at the University of California, Berkeley. Version 3F4 was released in 1993. Circuits may contain resistors, capacitors, inductors, mutual inductors, independent voltage and current sources, four types of dependent sources, transmission lines, and the four most common semiconductor devices: diodes, BJT's, JFET's, and MOSFET's. SPICE has built-in models for the semiconductor devices, and the user need specify only the pertinent model parameter values.

Credits

SPICE was developed by Laurence Nagel and others at the University of California at Berkeley, under the direction of Donald O. Pederson. This version was packaged for nanoHUB by Michael McLennan.

Cite this work

Researchers should cite this work as follows:

  • Michael McLennan (2010), "Spice3f4," http://nanohub.org/resources/spice3f4. (DOI: 10.4231/D3028PC9D).

    BibTex | EndNote

Tags

nanoHUB.org, a resource for nanoscience and nanotechnology, is supported by the National Science Foundation and other funding agencies. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the National Science Foundation.