Resources (1-14 of 14)

1. Experience Microfabricating Biosensors - A Summer Research Opportunity

   Online Presentations | 08 Jan 2024 | Contributor(s):: Adarsh Radadia, The Micro Nano Technology - Education Center

2. 3D Printed Electronics: A Primer

   Online Presentations | 10 May 2023 | Contributor(s):: Frank Silva, The Micro Nano Technology - Education Center

3. Machine Learning Predicts Additive Manufacturing Part Quality: Tutorial on Support Vector Regression

   Online Presentations | 26 Aug 2022 | Contributor(s):: Davis McGregor

   This tutorial introduces and demonstrates the use of machine learning (ML) to address this need. Using data collected from an AM factory, you will train a support vector regression (SVR) model to predict the dimensions of AM parts based on the design geometry and manufacturing parameters.

4. Terahertz Materials for 3D Printing

   Animations | 21 Aug 2022 | Contributor(s):: Ariel Delos Reyes, Rice University

   Terahertz (THz) represent the portion of the electromagnetic radiation between the microwave and the infrared region. Potential applications range from communication, pharmaceutical, medical and dental. However, the fabrication of photonic devices are challenging due to the limited choices...

5. Experience Microfabricating Biosensors: A Summer Research Opportunity

   Online Presentations | 17 Jun 2022 | Contributor(s):: Adarsh Radadia, The Micro Nano Technology - Education Center

6. Modeling and visualization of geometric errors for hemisphere structures produced by two-photon lithography

   Tools | 15 Jan 2021 | Contributor(s):: Sixian Jia, Yuhang Yang, Varun Ajit Kelkar, Hemangg Singh Rajput, Adriana Carola Salazar Coariti, Kimani C Toussaint, Chenhui Shao

   3D geometric measurements of fabricated structures/features

7. X-Ray Micro-Computed Tomography Characterization of the Internal Microstructure of 3D Printed Hardened Cement-based Materials

   Online Presentations | 09 Aug 2019 | Contributor(s):: Mohamadreza Moini

   In our research a lab-based X-ray microscope was used to perform micro-CT evaluations to explore the microstructural characteristics of 3-day old intact (i.e. not tested) 3D printed and cast hardened cement paste specimens at two levels of magnification: 0.4X and 4X. ...

8. Research in Xu’s Group

   Online Presentations | 07 Aug 2019 | Contributor(s):: Xianfan Xu

9. Building Molecules for Function: New Materials & Inks Will Be Needed If Additive Manufacturing Will Change Medicine

   Online Presentations | 27 Feb 2019 | Contributor(s):: Matthew L. Becker

   This presentation will describe the use of several translationally relevant chemistries and post-printing functionalization strategies that are impacting the practice of medicine and how physicians are planning for future therapies that were not possible previously.

10. Composite Filament Simulation 3D

    Tools | 15 Feb 2019 | Contributor(s):: Zachary Yun, Michelle Zhang, Ganesh Vurimi, Hayden Taylor, Sixian Jia

    Simulate electrical properties of a nanowire composite filament.

11. CELL-MET Thrust Area 2 - Nanomechanics: Scaffold Generation Using 3D Jet Writing

    Online Presentations | 07 Feb 2019 | Contributor(s):: Ayse Muniz, CELL-MET ERC

    In this presentation, UMich graduate student Ayșe Muñiz explains her work on Nanomechanics in Joerg Lahann's lab.

12. Tutorial on Two Photon Lithography Tool

    Online Presentations | 26 Nov 2018 | Contributor(s):: Mohammad Mahfuzul Kabir, Varun Ajit Kelkar

    Two-photon lithography (TPL) is a nano-scale 3-d fabrication technique. TPL depends upon the two-photon polymerization process, whereby two incident photons of light are absorbed by a precursor material leading to polymerization. The smallest feature size (voxel) achievable in a TPL...

13. Two Photon Lithography

    Tools | 06 Jul 2018 | Contributor(s):: Mohammad Mahfuzul Kabir, Varun Ajit Kelkar, Darren K Adams, Kimani C Toussaint

    Calculate voxel dimensions for a two-photon lithography process

14. Nanotechnology Principles Lab: Lithography

    Teaching Materials | 07 Dec 2015 | Contributor(s):: SHINE Project, SHINE Project

    This lab consists of activities designed to teach students about lithography. The entire bundle can be downloaded by clicking on the download link in the upper right or compontents can be individually downloaded by visiting the Supporting Docs tab. Learning Objectives: To understand how...