Multimeter

By Emmanuel Jose Ochoa1; Stella Quinones1

1. University of Texas at El Paso

Understand the correct procedure for measuring voltage (V) and current (I), and observe the dependence between the interchange of the leads and the sign of the numerical reading.

Launch Tool

This tool version is unpublished and cannot be run. If you would like to have this version staged, you can put a request through HUB Support.

Archive Version 1.0
Published on 19 Apr 2012 All versions

doi:10.4231/D3ZK55K84 cite this

This tool is closed source.

Category

Tools

Published on

Abstract

The objective of the Multimeter tool is to understand the correct procedure for measuring voltage (V) and current (I), and to observe the dependence between the interchange of the leads and the sign of the numerical reading. The tool allows the user to practice connecting the voltmeter in different locations to measure either the voltage or current in a circuit. If the measurement connection is incorrect, a warning message is displayed. Examine how reversing the leads at each connection affects the sign of the numerical reading.

Powered by

UTEP NCN Research Team

Sponsored by

This project is supported by NSF NCN Grant EEC-0634750.

Cite this work

Researchers should cite this work as follows:

  • Emmanuel Jose Ochoa, Stella Quinones (2014), "Multimeter," https://nanohub.org/resources/multimeter. (DOI: 10.4231/D3ZK55K84).

    BibTex | EndNote

Tags

  1. Circuit Design
  2. circuits
  3. current
  4. electrical engineering
  5. multimeter
  6. nanoelectronics
  7. NCN Group - Circuits
  8. voltage