You must login before you can run this tool.
Category
Published on
Abstract
An online numerical simulation tool at the nanoHUB website was developed to study and predict the electrical energy harvested from mechanical vibrations through a device with piezoelectric materials. This device consists of a cantilevered composite beam with piezoelectric and metallic layers and a proof mass attached on the tip. This electro-mechanical system is modeled with a set of ordinary differential equations that describe the dynamics of the displacement of the tip and the output voltage. The developed tool allows the user to set-up the dimensions and materials of the beam, along with diverse excitation conditions and different circuit topologies (full-wave rectifier or just a resistive load). Scaling effects were considered in the simulation to estimate the dominant mechanical damping components in MEMS devices. The predictions of this tool were compared against published experimental data, and show good agreement in frequency and voltage estimations.
Powered by
Nanoelectronics Research Group. Purdue University, West Lafayette, Indiana.
Microelectronics Research Center (CMUA). Universidad de los Andes, Colombia.
Bio
Jorge Mario Monsalve is a graduating Senior of B.S. in Mechanical Engineering at the Universidad de los Andes, Colombia. He is also on his senior year for obtaining a degree of B.S. in Electronics Engineering at the same university. He has been involved in the Micro- and Nano-technology research group lead by professor Alba G. Avila, doing experimental works with piezoelectric systems. He has been an undergraduate Teaching Assistant at 4 Materials Science related courses from the departments of Mechanical Engineering and Electrical Engineering.
German Felipe Giraldo is a Senior of B.Sb in Electronic Engineering and Physics at the Universidad de los Andes, Colombia. He has been involved in the the Andes University Microelectronic Center, working in the Techniques and Technologies for Electronic Design line of research, developing learning tools for the Computer Architecture class.
Sponsored by
nanoHUB Summer Undegraduate Research Fellowhip (S.U.R.F.) 2014
References
- Andosca, R., McDonald, T. G., Genova, V., Rosenberg, S., & Keating, J. (2012). Experimental and theoretical studies on MEMS piezoelectric vibrational energy. Sensors and Actuators, 76-87.
- duTout, N., Wardle, B., & Kim, S.-G. (2005). Design Considerations for MEMS-Scale Piezoelectric Mechanical Vibration Energy Harvesters. Integrated Ferroelectrics.
- Erktug, A. (2009). Electromechanical Modeling of Piezoelectric Energy Harvesters. Virginia Polytechnic Institute and State University.
- Hiroshi, H., Kiyoshi, I., & Susumo, K. (1994). Evaluation of Energy Dissipation Mechanism in Vibrational Microactuators. Micro Electro Mechanical Systems, 193-198.
- Power-Law Viscosity law. (n.d.). Retrieved June 20, 2014, from http://aerojet.engr.ucdavis.edu/fluenthelp/html/ug/node337.htm
- Roundy, S. (2003). Energy Scavenging for Wireless Sensor Nodes with a Focus on Vibration to Electricity Conversion. University of California, Berkeley.
- Townley, A. (n.d.). Vibrational Energy Harvesting Using MEMS Piezoelectric Generators. University of Pennsylvania, Electrical Engineering.
Cite this work
Researchers should cite this work as follows: