MOSFet

By Shaikh S. Ahmed1; Saumitra Raj Mehrotra2; SungGeun Kim2; Matteo Mannino2; Gerhard Klimeck2; Dragica Vasileska3; Xufeng Wang2; Himadri Pal2; Gloria Wahyu Budiman2

1. Southern Illinois University Carbondale 2. Purdue University 3. Arizona State University

Simulates the current-voltage characteristics for bulk, SOI, and double-gate Field Effect Transistors (FETs)

Launch Tool

You must login before you can run this tool.

Version 1.9.1 - published on 06 Dec 2017

doi:10.4231/D34T6F54G cite this

This tool is closed source.

First-Time User Guide View All Supporting Documents

Recent Questions

Ask a question

Recent Questions (1-20 of 27)
2709 what does electric field at initial bias na d electric field at final bias mean ?
Asked by TOUFIQ AHMED SHEIKH 23567018 Open 2
0 Like
2692 why are there two lines in V-I characteristics of the simulation results?
Asked by Deeptansh Sharma Open 0
Points 0 Like
2529 How do you vary the gate to source voltage?
Asked by Danny Sit Closed 1
0 Like
2417 How can i calculate DIBL from the simulation?
Asked by Anonymous Open 0
0 Like
2346 How can I tell if MOSFET failed to converge?
Asked by Anonymous Closed 1
0 Like
2210 Unable to obtain exclusive lock on CTF directo
Asked by Anonymous Open 0
2128 MOSFET
Asked by Anonymous Open 0
2075 How to specify drain, source and substrate voltages separately?
Asked by Stefano Larentis Open 0
0 Like
1876 Simulation of dual material gate MOSFET
Asked by Anonymous Open 0
1856 what is the difference between substrate and channel, isn't in bulk mosfet there is only one substrate?
Asked by ahmed hossam hassan Open 0
0 Like
1728 How does this simulator considers electron effective mass in its modeling?
Asked by JK Saha Open 0
0 Like
1605 How to measure the thresold and leakage current for MOSFET
Asked by Priyank Rathod Open 1
0 Like
1488 Convergence problem, take smaller steps
Asked by Mustafa Kamal Open 0
Points 0 Like
1147 how can i plot conduction band along the semiconductor surface from source to drian
Asked by mahmoud moamen ataa Open 0
0 Like
1014 how can i get the device description of double gate MOS
Asked by Anonymous Open 0
0 Like
876 How to provide parameter values for SOI MOSFET simulation
Asked by M Muthu lakshmi Open 1
0 Like
641 Running impact ionization
Asked by Mirembe Musisi-Nkambwe Open 1
0 Like
529 How do you determine the threshold bias from this simulation?
Asked by Jose Valdez Closed 2
482 Can I save the results of a MOSFET run and come back later to reuse and continue the study?
Asked by Richard Kiehl Open 1
0 Like
481 Can I save the results of a MOSFET run and come back later to reuse and continue the study?
Asked by Richard Kiehl Open 1
0 Like